Kenmore Elite 66513969K015 undercounter dishwasher Parts

Yes. The Kenmore Elite 66513969K015 dishwasher uses an Ultra Wash filtration system with two filters (an upper filter assembly and a lower filter) located at the bottom center of the tub; cleaning them periodically helps maintain peak wash performance.

Where the filter is and what it does

The filtration system is designed to keep food soil from recirculating and to protect the pump.

• Upper filter assembly: helps keep oversized items and fine particles out of the pump
• Lower filter: helps keep food from being recirculated onto dishes
• Location: bottom center of the dishwasher tub

Filter piece	What you may notice when it needs cleaning	What it affects
Upper filter assembly	Visible debris on the filter area	Pump protection, overall cleaning
Lower filter	Gritty dishes or leftover soil	Soil recirculation, wash results

When to clean the filters

We recommend checking the filters any time performance drops or you notice residue.

• Visible objects or soil on/around the upper filter area
• Cleaning performance degrades (soil remains on dishes)
• Dishes feel gritty to the touch
• Odors develop after several cycles (often tied to trapped food soil)

For the model-specific filter removal and cleaning steps, follow the 66513969K015 owner's manual.

Why it matters

A clogged or dirty filter can reduce water flow through the wash system, leave soil on dishes, and contribute to odors. Keeping the upper and lower filters clean helps your Kenmore Elite dishwasher wash and drain the way it was designed to.

Last updated: January 2026

Common problems on the Kenmore Elite 66513969K015 dishwasher are no-start or stopping mid-cycle (door not fully latched or power issue), not draining (kinked hose or disposer knockout plug still in place), poor cleaning from loading or water temperature, hard-water residue, odors, and drying issues tied to heat and airflow. See the 66513969K015 owner's manual for model-specific troubleshooting steps.

Most common symptoms and what usually causes them

• Dishwasher does not run or pauses: door not closed and latched, Start/Resume needs to be pressed again, cycle not selected, or a tripped breaker/fuse.
• Won’t drain: kinked drain hose, food obstruction in drain/disposer, disposer knockout plug not removed, or a failed drain pump.
• Dishes come out dirty: blocked wash system from oversized items, incorrect cycle for soil level, water not hot enough (target 120°F), or detergent issues.
• Hard-water film or white residue: very hard water; monthly dishwasher cleaner, rinse aid, and regular filter cleaning help.
• Odors: filter and sump area need cleaning; run a rinse cycle between loads if the unit sits.

Quick checks we recommend before replacing parts

1. Confirm the door closes freely (no cookie sheets or cutting boards blocking the back of the tub).
2. Verify household power (breaker/fuse) and restart the cycle using Start/Resume.
3. Inspect the drain hose routing for kinks and confirm the disposer inlet knockout plug is removed.
4. Confirm incoming hot water is at least 120°F (49°C).
5. Use fresh automatic dishwasher detergent (not hand dish soap) and keep the rinse aid cap installed.

Parts that commonly solve these problems on this model

Symptom	Part to check	What it affects
Not draining	Dishwasher drain pump WPW10348269	Pumps water out during drain
Not filling or fills slowly	Dishwasher water inlet valve W11175771	Controls water entering the tub
Poor drying	Dishwasher heater W10703867	Heats water and supports drying
Odors, residue, poor wash	Dishwasher filter W10872845	Traps soil in the filtration system

Why it matters

Most “big” dishwasher complaints trace back to basics: a door that is not fully latched, a drain path restriction, water temperature below 120°F, or filtration and detergent issues. Fixing those first prevents repeat clogs, poor cleaning, and cycle interruptions.

Last updated: January 2026

Kenmore is a brand name, and the Kenmore Elite dishwasher model 66513969K015 is built by Whirlpool. The 665 model prefix is the key identifier that ties this dishwasher to Whirlpool manufacturing and parts sourcing.

How we identify the manufacturer

We use the model prefix and parts platform used in the documentation for Kenmore Elite 66513969K015.

• Kenmore appliances are produced by different manufacturers depending on the model prefix.
• A 665 prefix is associated with Whirlpool-built Kenmore dishwashers.
• This matters when you are matching parts like a drain pump, water inlet valve, or heater.
• Your 66513969K015 owners manual also groups this unit with the 665.1396 and 665.1397 series, which aligns with the Whirlpool-built platform.

Why it matters for parts and repairs

Knowing Whirlpool built this Kenmore Elite dishwasher helps you choose compatible replacement parts and follow the correct service approach.

• Parts listings often show Whirlpool-style part IDs (for example, WP-prefixed IDs).
• Repair procedures and wiring layouts are consistent within the Whirlpool-built 665 platform.
• Common repairs (drain issues, filling issues, drying issues) often point to the same core components.

Examples of Whirlpool-platform parts used on this model

Repair symptom	Common part involved	Example part for this model
Not draining	Drain pump	Dishwasher drain pump WPW10348269
Not filling	Water inlet valve	Dishwasher water inlet valve W11175771
Poor drying	Heater	Dishwasher heater W10703867

Helpful tip when ordering parts

Always match parts to the full model number 66513969K015 (not just 665.1396x or 665.1397x) to avoid fit issues.

Last updated: January 2026