Kenmore 11081878110 washer Parts

Your Kenmore washer model number is printed on the appliance’s model and serial tag; for Kenmore washers it often starts with 110 (like 11081878110). On most top-load Kenmore washers, we find it under the lid around the tub opening; on many front-load models, it’s inside the door opening.

Where to look on Kenmore washers

Check these common locations first:

• Top-load washer: under the lid, along the rim of the tub opening
• Front-load washer: inside the door opening, on the door frame or cabinet front
• All styles: back panel near the power cord, or along the side of the cabinet
• Some models: behind the control panel (requires disassembly, not recommended just to find the tag)

What the model number looks like (and why it matters)

For Kenmore, the model number is usually 10 to 12+ characters and may be all numbers or a mix of letters and numbers. Using the exact model number helps us match the correct parts list, diagrams, and replacements for your washer.

What you see on the tag	What it tells you	What to do next
11081878110	Exact Kenmore washer model	Use it to select parts by model
110.xxxxxxx format	Kenmore model family pattern	Copy the full number exactly
Serial number	Production identifier	Keep it for service history

Quick tips to avoid ordering the wrong part

• Copy the model number exactly, including all digits
• Take a clear photo of the tag before ordering
• Match parts by model number first, not by how the washer looks
• If you are replacing an agitator-related item, confirm whether your washer uses an agitator and which style

Why it matters

Kenmore washers can look similar across years, but internal components (like the drive system, clutch, pump, or agitator parts) can differ by model. The correct model number keeps you from buying a part that does not fit.

If you already have the model number and you are troubleshooting agitation issues, a common wear item on many Kenmore top-load designs is the agitator dog 80040.

Last updated: February 2026

A Kenmore washer typically lasts 10 to 15 years with normal household use. For your Kenmore 11081878110 top-load washer, consistent maintenance and avoiding overloads helps you reach the high end of that range; worn drive and drain components can shorten it.

Typical lifespan and what affects it

Most washers fail early from wear, vibration, or water-related issues. These factors make the biggest difference:

• Load size and frequency (heavy, daily use shortens life)
• Overloading or washing bulky items too often
• Hard water and detergent buildup
• Out-of-balance spinning and repeated banging
• Small leaks that go unnoticed

Parts that commonly limit washer life

When these parts wear out, performance drops fast (poor agitation, weak spin, or draining problems). If symptoms match, checking these parts is a practical next step:

• Agitator dog 80040 (agitator “ratcheting” and turnover)
• Coupling 285753A (motor-to-transmission drive; agitation/spin issues)
• Water pump WP3363394 (drain and leak problems)
• Clutch 285785 (slow or weak spin)
• Valve 285805 (fill problems, slow fill, or no fill)

Quick “repair or replace” guide

What you notice	Most likely area	Typical outcome
Won’t drain or leaks during drain	Drain pump, hoses	Often worth repairing
Agitates poorly but motor runs	Coupling, agitator parts	Often worth repairing
Loud roaring in spin, water under tub	Bearings/seals, tub wear	Often a major repair
Repeated out-of-balance banging	Suspension, load habits	Repair plus loading changes

Why it matters

Knowing the 10 to 15 year lifespan helps you decide whether to invest in a drive system repair (like a coupling or clutch) versus planning for replacement, especially if multiple symptoms show up at once.

Last updated: February 2026

For Kenmore washer model 11081878110, the most commonly replaced parts are the ones tied to everyday wear: agitation, draining, spinning, and filling. If your washer won’t agitate, won’t drain, leaks, or won’t spin, the parts below are the first places we check.

Most common replacement parts (and what symptoms they fix)

• Agitation problems (weak or no agitation): agitator dog 80040, agitator cam 285748
• Won’t spin or makes a grinding/rubbing noise: clutch 285785, washer drive block WP389140
• Won’t drain or leaves water in the tub: water pump WP3363394, hose-wl WP353244
• Won’t fill or fills incorrectly: valve 285805
• Out-of-balance banging or excessive vibration: washer suspension spring WP63907, counterweight spring (red) WPW10250667

Quick “symptom to part” guide

Symptom	Most likely part(s) to check	Why it matters
Agitator moves but clothes don’t	Agitator dog 80040	Worn dogs slip and stop the top of the agitator from grabbing
Washer won’t drain	Water pump WP3363394	A failing pump can’t move water out, so the cycle stalls
Spins poorly or smells hot	Clutch 285785	A worn clutch can’t transfer power smoothly to the basket
Loud clunking in spin	Washer suspension spring WP63907	Weak suspension lets the tub swing too far
Water won’t stop or won’t enter	Valve 285805	The inlet valve controls water flow into the washer

How we recommend choosing the right part first

• Match the symptom to the cycle (fill, agitate, drain, spin).
• Look for simple causes first (kinked drain hose, overloaded tub, unbalanced load).
• If the issue is intermittent, inspect for wear marks, cracks, or looseness.
• Replace obvious wear items together when it makes sense (agitator dogs with the cam).

Why it matters

Targeting the most common wear parts first saves time and prevents repeat breakdowns. In a direct-drive Kenmore top-load washer like 11081878110, agitation and drain components typically wear out before major drive components.

Last updated: March 2026