Kenmore 79681379210 dryer Parts

Kenmore Elite dryers display error codes to point you to the failing system (power, control, keypad, heater circuit, or temperature sensing). For Kenmore model 79681379210, start by matching the code on the display to the list below, then follow the checks in your 79681379210 owner's manual.

Common Kenmore Elite dryer error codes and what they mean

• PF: Power failure (cycle interrupted by a power loss)
• F:01: Main electronic control board problem
• F:02: Keypad or user interface problem
• F:20: Heater relay problem (heating circuit control)
• F:22 / F:23: Outlet thermistor problem (temperature sensing at exhaust)
• F:24 / F:25: Inlet thermistor problem (temperature sensing at intake)

What to do first (safe, quick checks)

• Unplug the dryer (or switch off the breaker) for 2 to 5 minutes, then restore power and retry.
• If you see PF, confirm the outlet is solid, the cord is tight, and the breaker is not tripping.
• Clean the lint screen and confirm airflow is strong; restricted venting can trigger temperature-related codes.
• Run a timed dry cycle to see if the code returns consistently.
• If the code points to temperature sensing, inspect wiring connections to the thermistor and thermostats for looseness or heat damage.

Parts that commonly relate to these codes (by symptom)

Code group	System involved	Parts often checked/replaced
PF	Power supply	Terminal block/cord (as applicable), house breaker/outlet
F:01	Control	Control board (model-specific)
F:02	User interface	Console keypad/user interface (model-specific)
F:20	Heating control	Heater relay circuit, heating element wiring
F:22-F:25	Temperature sensing	Thermistor, thermostats, wiring harness

If you’re getting F:22-F:25 repeatedly and airflow is good, the temperature sensor is a common suspect; for this model that is the dryer thermistor AGM30045804.

Why it matters

Using the error code narrows troubleshooting fast, which helps prevent repeat shutdowns, long dry times, and overheating conditions caused by airflow restrictions or failed temperature controls.

Last updated: February 2026

The model number for this Kenmore dryer is 79681379210. You will see 79681379210 on the model tag (usually inside the door opening) and in the paperwork for the unit; it is also listed in the 79681379210 owner's manual.

Where to find the model number on the dryer

Most Kenmore dryers, including model 79681379210, have the model tag in one of these spots:

• Inside the door opening on the front panel
• On the door itself (edge or inner frame)
• On the cabinet frame just behind the door
• In the manual packet that came with the dryer

How to read the model number correctly

Model numbers must match exactly for parts and diagrams to line up.

• Use the full number: 79681379210 (do not drop digits)
• Copy it exactly as printed (numbers only for this model)
• If you also see a serial number, keep it separate; serial numbers are not used to look up parts

What you see on the tag	What it means	Use it for
Model: 79681379210	The dryer’s model identifier	Parts lookup, diagrams, manuals
Serial: (varies)	Unique unit identifier	Service history, warranty records

Why it matters

Using the exact model number 79681379210 helps us match the correct Kenmore dryer parts (like a drum belt, heating element, or moisture sensor) and avoid ordering a similar-looking part that will not fit.

Last updated: February 2026

Kenmore “80 Series” is a series label used on many different dryers, so the size varies by the exact model number. The model on this page, Kenmore 796.81379210, is not an 80 Series (it is a 796 platform); use the model’s spec section in the 79681379210 manual for the exact capacity and dimensions.

How to get the exact size for your Kenmore dryer

Use the model number from the door opening or door frame, then match it to the specifications.

• Find the full model number (example: 796.81379210)
• Check the “Specifications” or “Dimensions and clearances” section in the manual
• Measure your installation space (width, height, depth) before ordering a replacement dryer
• Allow extra depth for the vent elbow and airflow clearance
• If you are comparing dryers, use drum capacity (cu. ft.) plus venting requirements

Typical size ranges (for quick planning)

These ranges help when you are roughing in space; your exact numbers come from the manual.

Dryer type	Typical width	Typical height	Typical depth (cabinet)
Compact	~24 in.	~33 to 36 in.	~24 to 28 in.
Full-size (most Kenmore)	~27 in.	~38 to 39 in.	~29 to 32 in.

Why it matters

Correct sizing prevents installation problems and improves drying performance. A tight fit or poor vent clearance increases dry times, heat buildup, and lint accumulation.

Related maintenance tip

If you are troubleshooting long dry times while checking size and venting, start with the lint system. A damaged or missing lint screen can also reduce airflow; the dryer lint filter 5231EL1003B is the correct lint screen part listing for this model.

Last updated: February 2026