Common Electrolux dishwasher repairs
When your dishwasher isn't working, you want it fixed fast. Knowing the cause of an issue can help you make a quick, accurate repair.
Dishwasher won’t fill
If your Electrolux dishwasher won’t fill, start by checking that the water supply valve is open. Remove any obstructions from the overfill float so it can move freely—if it’s stuck in the highest position, water can’t enter the tub. A faulty float switch or inlet valve can also cause filling problems. If the inlet valve has failed, replace the water inlet valve to restore water flow.
Dishwasher not dispensing detergent
If the detergent dispenser doesn’t open during the cycle, detergent won’t reach your dishes. The latch mechanism could be worn, or the control board may not be triggering the release. In either case, installing a new detergent dispenser ensures detergent is released at the right time.
Dishwasher won’t start
If your dishwasher won’t start, the door latch assembly could be damaged or not engaging the strike. Without a secure latch, the control won’t begin the cycle. Replace the door latch assembly if it’s worn or broken.
Dishwasher won’t drain
Standing water after the cycle often points to a faulty drain pump. If the pump doesn’t run or can’t push water out of the tub, replacing the drain pump will restore proper draining.
Why get your Electrolux dishwasher parts from Sears PartsDirect
Sears PartsDirect takes the guesswork out of finding the right Electrolux dishwasher parts. Our detailed diagrams let you see exactly where each part fits, and our search tools make it easy to match the right part to your model.
- Easy-to-read illustrated parts diagrams
- Guaranteed model compatibility
- Access to step-by-step repair guides and videos
- Fast shipping to get your dishwasher running again
Get repair help
Visit our dishwasher DIY repair help section for more tips and step-by-step guides on diagnosing and fixing common Electrolux dishwasher issues.
Electrolux dishwasher FAQs
Why is there a white film on my dishes?
Cloudy residue is often mineral buildup from hard water. Run a cleaning cycle with dishwasher cleaner and consider adding a water softener if buildup is frequent.
Why is my Electrolux dishwasher door not closing properly?
A misaligned latch or broken spring can keep the door from sealing. Inspect these parts and replace them if damaged.
Why is my dishwasher tripping the breaker?
Electrical shorts in the motor, wiring, or heating element can overload the circuit. Inspect for visible damage and test with a multimeter to confirm the cause.
What’s the difference between a quick wash and a normal cycle?
Quick wash uses less water and time, ideal for lightly soiled dishes. Normal cycles run longer with more rinses for heavily soiled loads.
When should I replace my dishwasher?
If repairs exceed half the cost of a new unit, or the tub is cracked, replacement may be more cost-effective than continued repairs.