Kenmore Washer Parts — Browse All Models

Kenmore washers are built for performance, but like all appliances, they can develop problems over time. Here’s how to identify what’s wrong and which parts to check.

If your Kenmore washer is slow to fill or doesn’t fill at all, the issue may be with the water inlet valve. This part controls the water flow into the tub and may need to be replaced if it’s clogged or faulty. A damaged hose or a kink in the water line can also restrict flow.

A washer that fills and drains but doesn’t agitate or spin may have a failed drive motor or gearcase. Another possible culprit is the motor coupling on direct-drive models, which connects the motor to the transmission.

• Water inlet valve – Regulates water entering the tub during fill cycles.
• Drive belt – Transfers power from the motor to the spin basket; failure can lead to no spinning or agitation.
• Lid switch assembly – Stops operation when the lid is open; a broken switch can keep the washer from starting.
• Drain pump – Clears water after each cycle. If the washer leaves standing water, the pump may be blocked or burned out.
• Electronic control board – Coordinates all washer functions. Replace it if the display is unresponsive or error codes appear unexpectedly.

Sears PartsDirect helps you fix your washer fast with:

• OEM replacement parts that fit and perform like the originals
• Model-specific diagrams to help you locate and identify components
• Trusted repair resources like our DIY washer repair help, which includes videos and step-by-step instructions

With proper care, most Kenmore washers last between 10 and 14 years. Regular maintenance like cleaning the tub and checking hoses can extend lifespan.

These error codes help identify problems like water flow issues, motor faults, or control board errors. Check your user manual or the error code chart to find the cause.

A loud thump may mean the load is unbalanced. Try redistributing the clothes evenly. If that doesn’t help, inspect the suspension springs or shock absorbers.

Always use high-efficiency (HE) detergent. Standard detergent can create excess suds, leading to poor performance and drainage issues.

Run a tub-clean cycle with a washer cleaner, wipe down the gasket and door, and leave the door open between washes to reduce moisture and odor buildup.