Kenmore 11026852501 washer Parts

Your Kenmore washer model number is on the model and serial number label; for Kenmore model 11026852501, the label is located under the washer lid. Use that full model number when ordering parts so the lid switch, drain pump, and other components match your exact washer.

Check these common label locations in this order:

• Under the washer lid (lift the lid and look around the rim or underside area)
• Along the top edge of the cabinet opening under the lid
• On the back panel near the power cord entry
• Inside the control console area (less common on this style)

For diagrams and the exact label location callouts, use the 11026852501 owner’s manual.

Kenmore top-load washers in the 110-prefix family typically show a model number that starts with 110 and continues with additional digits (as on 11026852501). That full number ties to the correct parts list, wiring, and installation details.

Before you buy, we recommend:

• Write the model number exactly as printed (include all digits)
• Take a clear photo of the label for reference
• Match the part name and ID to your symptom (drain, spin, agitation, lid not sensing)
• Use the manual’s troubleshooting and operation sections to confirm the failure

If you are diagnosing a no-drain issue, a common replacement is the washer drain pump WP3363394 (confirm with your symptoms and the parts diagram for your model).

Kenmore washers often share similar cabinets and controls across multiple model numbers, but internal parts can differ. Using the exact model number (11026852501) prevents mismatched components and repeat repairs.

Last updated: February 2026

Yes, repairing a Kenmore washer is worth it when the fix restores reliable washing and spinning for significantly less than replacing the machine. For Kenmore model 11026852501, many common failures involve serviceable parts like the lid switch, drain pump, clutch, or motor coupling; our 11026852501 owner's manual helps you match symptoms to the right repair.

We use three practical checks:

• Total repair cost vs. replacement: parts plus labor should stay well below the cost of a comparable new washer.
• What failed: wear items (pump, lid switch, coupling, agitator dogs) are usually cost-effective.
• Overall condition: if the basket, tub, and cabinet are solid and the washer has been maintained, repairs pay off.

These are frequent, straightforward fixes on direct-drive Kenmore top-load washers:

• No drain or slow drain: washer drain pump WP3363394
• Won’t spin or stops when lid opens: washer lid switch assembly WP8318084
• Agitates but won’t spin (or vice versa), loud grinding: washer motor coupling 285753A
• Poor agitation (clothes not moving well): agitator dog 80040
• Spin issues with burning smell or slipping: clutch 285785

A targeted repair prevents repeat breakdowns and protects clothing. The manual also emphasizes avoiding overloading and keeping loads balanced so items move freely during washing, which reduces strain on the drive and suspension over time.

Last updated: February 2026

A Kenmore washer typically lasts 10 to 15 years with normal household use. For Kenmore model 11026852501, avoiding overloading, keeping loads balanced, and following the care and bleach-use guidance in the 11026852501 owner's manual helps you reach the longer end of that range.

• Overloading and poor load balance: loads should move freely during washing.
• Detergent and bleach habits: never pour chlorine bleach directly onto the load; wipe spills promptly.
• Wear items over time: drive and spin components, drain system parts, and lid safety components.
• Maintenance and usage pattern: frequent heavy loads shorten life faster than mixed, properly sized loads.
• Pre-existing fabric issues: items with loose strings or damage can tangle and strain the wash action.

If performance drops (weak agitation, no spin, won’t drain), these are common suspects on many Kenmore top-load designs:

A washer that is consistently overloaded or run with unbalanced loads puts extra stress on the drive system and basket support. That stress accelerates wear, increases vibration, and often turns a small issue into a larger repair.

• Keep loads balanced; mix items to prevent a heavy “lump” on one side.
• Leave enough room so items move freely.
• Use bleach correctly (dilute and dispense properly; never dump on fabrics).
• Check pockets and tie strings to prevent tangling.
• Address new noises, burning smells, or repeated no-drain events early.

Last updated: February 2026