Installation guide
Owner’s manual
Error Codes
Where is the model number on my Kenmore electric stove?
On Kenmore electric range model 79096213409, the model and serial number are printed on an identification (serial) plate located on the right side of the oven front frame, inside the storage drawer or warmer drawer compartment. The quickest way to see it is to pull the bottom drawer out.
- Turn the oven off and let it cool.
- Pull the storage drawer/warmer drawer open (or remove it if needed).
- Look at the right side of the oven front frame for the identification plate.
- Write down both the model and serial numbers for parts lookup and service.
- Use a flashlight; the plate can be easy to miss in low light.
For this Kenmore range family, the drawer area is the primary spot. If you are still not seeing it, these are the next most common places to check on many freestanding ranges:
| Location | What it looks like | When to check it |
|---|---|---|
| Storage/warmer drawer opening (right side of front frame) | Silver/white sticker or metal plate | First choice for model 79096213409 |
| Oven door frame (door jamb area) | Sticker on the front frame | If the drawer label is damaged or missing |
| Back panel near the vent area | Sticker/plate on rear sheet metal | If the range has been serviced and labels were relocated |
We use the model number to match the correct Kenmore parts diagrams and ensure you get the right replacement parts (for example, a control switch, bake element, or oven light bulb) for your exact configuration.
For a diagram-style reference to the identification plate location, check the 79096213409 owner's manual.
Last updated: January 2026
How to read Kenmore model numbers?
Kenmore model numbers are read left to right: the first 3 digits identify the manufacturer, and the remaining digits narrow down the exact product series and feature set. For your Kenmore electric range model 79096213409, the 790 prefix is the key identifier to start with. See the 79096213409 owner's manual for where to find the model and serial tag on the range.
Most Kenmore model numbers follow this pattern:
- First 3 digits: manufacturer prefix (who built it for Kenmore)
- Next digits: base model family/series
- Last digits: design or feature variations (color, trim, control style, revisions)
For model 79096213409, the 790 prefix indicates it is in the Kenmore 790-built range family.
On Kenmore 79096213409 electric ranges, the identification plate is typically located:
- On the right side of the oven front frame
- Behind the storage drawer or warmer drawer (depending on configuration)
- Visible after you open the drawer fully
This location matters because the full model number (not just “790”) is what we use to match the correct bake element, broil element, control overlay, and other parts.
Even small model-number differences can change electrical and fit details. Using the complete model number helps ensure:
- Correct surface element control switch selection
- Correct radiant surface element wattage and size
- Correct oven temperature sensor/probe compatibility
- Correct control overlay layout and button labeling
| What you have | What it’s good for | What it’s not enough for |
|---|---|---|
| Prefix only (example: 790) | Identifying the model family | Ordering exact replacement parts |
| Full model (79096213409) | Exact parts match and diagrams | None; this is what we want |
| Serial number | Production run info | Not a substitute for model number |
If you’re trying to interpret a fault code on a Kenmore 790-built range, use Kenmore 790 range 4-digit error codes to match the code to likely causes (such as a sensor issue, wiring problem, or control fault).
Last updated: January 2026
How do I reset my Kenmore electric range?
To reset your Kenmore electric range model 79096213409, turn the range off, then restore power by cycling the circuit breaker (or unplugging and plugging back in). After power returns, reset the clock and any oven settings as shown in the 79096213409 owner's manual.
- Turn all surface element knobs to OFF.
- If the oven is running, press Cancel/Off (if your control has it).
- Turn the range’s breaker OFF for 1 minute.
- Turn the breaker ON.
- Set the clock (the display often flashes 12:00 after an interruption).
- Confirm the range is getting power (a tripped breaker can look like a control failure).
- Check for a partially tripped breaker; switch it fully OFF, then ON.
- If the cooktop works but the oven control is unresponsive, a control or wiring issue is more likely than a simple reset.
| What you see | What it means | What to do |
|---|---|---|
| Display flashes “12:00” | Power was interrupted | Set the clock and reselect oven mode |
| Oven starts working normally | Control recovered | Use as normal |
| Same problem returns quickly | Underlying fault remains | Troubleshoot error codes and heating circuits |
A power-cycle reset clears many temporary electronic control glitches, but it will not fix a failed bake element, stuck surface element switch, or a shorted sensor. If heating problems continue after resetting, focus on the heating circuit and controls.
If your range is showing an error code, use Kenmore 790 self-cleaning range error codes to match the code to the most likely cause and the next checks.
Last updated: January 2026
