Can you still get parts for a Kenmore dishwasher?
Yes. We still carry replacement parts for many Kenmore dishwashers, including Kenmore model 66513032K110. The key is matching parts to your exact model number so the fit and electrical ratings are correct; your 66513032K110 owner’s manual also helps confirm features and service details.
How to make sure you order the right part
- Match the full model number exactly: 66513032K110.
- Compare the part name and part ID, not just a description.
- Use the symptom to narrow the part (no heat, won’t drain, leaking, won’t fill).
- Check whether your unit is hardwired or uses a power cord before starting a repair.
- Follow the installation clearances and routing rules so hoses and wiring do not rub the motor or legs.
Common Kenmore dishwasher parts people replace
These are frequently needed items for this model family:
| Problem you see | Part that often fixes it | Example part for 66513032K110 |
|---|---|---|
| Dishes not drying, water not heating | Heating circuit issue | Dishwasher heating element W10518394 |
| Dishwasher won’t drain or drains slowly | Drain pump or drain path restriction | Dishwasher drain pump (varies by model) |
| Water left in bottom, debris buildup | Filter needs cleaning or replacement | Dishwasher filter W10872845 |
| Leaks at the door | Door seal or latch alignment | Dishwasher door seal and strike kit (varies by model) |
Why it matters
Kenmore dishwashers are built with model-specific pumps, seals, sensors, and electrical connectors. Ordering by model number helps you avoid a part that looks similar but mounts differently, leaks, or draws the wrong wattage.
Quick safety and install notes
From the installation guidance for this dishwasher type:
- Use two or more people to move and position the dishwasher.
- Do not run the drain line, water line, or wiring where it can contact the motor or legs.
- Do not install over carpet; keep the unit protected from freezing.
- Corner installs need about 2 inches of door clearance to the wall or cabinet.
Last updated: February 2026
Is it worth repairing a Kenmore dishwasher?
For a Kenmore undercounter dishwasher like model 66513032K110, repair is worth it when the fix is a leak, drain issue, or heating problem and the total repair cost stays well below the price of a comparable replacement. It is also worth repairing when the tub and door seal surfaces are still in good shape.
A quick way to decide (cost vs. value)
Use this checklist before buying parts or scheduling service:
- If the dishwasher is under 10 years old, repairs usually make sense.
- If the repair estimate is under 50% of replacement cost, repair is usually the better value.
- If the unit has rust-through, a cracked tub, or repeated leaks, replacement is usually the better choice.
- If the problem is no heat, poor drying, or long cycles, a heating or sensor-related repair is often cost-effective.
- If the problem is not draining, a drain pump or drain hose repair is often straightforward.
Common repairs that are usually “worth it”
These are frequent, fixable issues on dishwashers like the 66513032K110:
- No heat or poor drying: check the dishwasher heating element W10518394
- Not draining or standing water: check the dishwasher drain pump WPW10348269 and drain hose routing
- Leaks at the door: check the dishwasher door seal and strike kit W10542314
- Poor cleaning with long cycles: clean the filter and confirm rinse aid use (many efficient models rely on rinse aid for drying)
Repair vs. replace: typical examples
| Situation | Usually best choice | Why |
|---|---|---|
| Won’t drain, otherwise runs | Repair | Often a pump, hose, or blockage issue |
| Poor drying, dishes wet | Repair | Heating and rinse aid issues are commonly fixable |
| Multiple major failures at once | Replace | Costs add up quickly (pump, control, motor) |
| Tub damage or chronic leaking | Replace | Structural issues are not cost-effective |
Why it matters
A targeted repair can restore cleaning and drying performance without the cost and hassle of replacing an installed undercounter dishwasher. Also, modern “water and energy efficient” designs can run longer cycles by design, so it is important to separate normal operation from an actual failure.
What to check first (before ordering parts)
We recommend confirming these basics using the 66513032K110 installation guide:
- Water supply is turned on and filling properly
- Drain hose is installed and routed correctly (no kinks, no improper loops)
- Power supply is correct and the dishwasher is grounded
- The dishwasher is level and not contacting the motor/legs area
Last updated: February 2026
How do I find the model number on my 66513032K110?
The model number for your Kenmore undercounter dishwasher is printed on the appliance’s model and serial tag. On most Kenmore dishwashers like model 66513032K110, you will find that tag on the tub frame around the door opening (often along the left or right side) when you open the door.
Where to look on the dishwasher
Check these common locations in this order:
- Along the inner door frame (tub opening), left side
- Along the inner door frame (tub opening), right side
- On the top edge of the tub opening, just under the countertop
- On the side of the inner door panel (visible with the door open)
What the label looks like
The tag typically includes both a model number and a serial number.
| You will see | What it means | Why you need it |
|---|---|---|
| Model number (example: 66513032K110) | Identifies the exact dishwasher design | Ensures parts like a drain pump or door latch fit correctly |
| Serial number | Production code and build details | Helps match revisions when ordering certain parts |
Tips to read it accurately
Use these quick checks so you copy the number correctly:
- Write the model number exactly as shown, including all digits and letters
- Use a flashlight; the print can be small or lightly stamped
- Clean the tag gently with a damp cloth if it is greasy or dusty
- Take a clear photo so you can zoom in later
Why it matters
Kenmore dishwashers can look similar across many model numbers, but parts and wiring can differ. Using the exact model number helps us match the correct diagrams, installation information, and replacement parts.
For more model identification and documentation details, use the installation guide.
Last updated: March 2026





