Kenmore 10658129700 refrigerator Parts

On Kenmore side-by-side refrigerator model 10658129700, the model number is printed on the appliance identification label (the same label that also lists the serial number). We use that model number to match the correct parts list and the right Kenmore refrigerator manual for your exact unit.

• Open the fresh food (refrigerator) door and inspect the inner cabinet walls near the front opening
• Check the side wall around crisper-drawer height
• Look along the top interior trim area near the ceiling of the compartment
• If you do not see it in the refrigerator section, check the freezer-side interior walls
• Use a flashlight; the label is often small and easy to miss

The ID label typically includes both a model number and a serial number. The serial number format varies by production run, so use the model number (for example, 10658129700) when ordering parts.

Kenmore 106-series refrigerators can look similar across multiple models, but parts like the water filter, ice maker, and water inlet valve can differ. Using the exact model number helps us match components like the genuine Kenmore refrigerator water filter EDR3RXD1 and avoid ordering the wrong replacement.

• Compare the label’s model number to the parts list for an exact match
• Use the owner's manual to confirm feature locations (dispenser controls, chilled door bin control, water system flushing)
• If you are ordering parts beyond the common items, search by the full model number on Sears PartsDirect

Last updated: February 2026

Common Kenmore Elite refrigerator problems include warm temperatures (cooling failure), ice maker or water dispenser trouble, unusual noises, and water leaks. On Kenmore model 10658129700, these symptoms are often tied to airflow issues, water system restrictions, door sealing problems, or defrost-related icing; our 10658129700 owner's manual troubleshooting section covers the quickest checks.

• Not cooling or uneven cooling: blocked air vents, dirty condenser area, evaporator fan issues, or a control/thermostat problem
• Ice maker not making ice: restricted water supply, clogged filter, inlet valve issue, or freezer temperature too warm
• Water leaking: clogged/iced defrost drain, loose water line connections, or dispenser/ice maker supply issues
• Noisy operation: normal valve buzz during ice maker fill, fan/compressor speed changes, or vibration/rattling from cabinet contact
• Runs a lot: frequent door openings, warm room, large food load, or doors not sealing well

1. Confirm the controls are on and set to normal temperatures (not just “coldest”).
2. Allow 24 hours after a new install or major setting change for temperatures to stabilize.
3. Make sure vents inside both compartments are not blocked by food packages.
4. If water or ice is slow right after a filter change, flush the system and discard the first glass of water.
5. Listen for when the noise happens (during ice maker fill, right after door close, or constantly).

Cooling, ice, and leak complaints often share the same root causes: restricted airflow, a partially blocked water path (filter or valve), or frost buildup from a defrost/drain issue. Fixing the underlying cause protects food temperatures and helps the compressor and fans run normally.

For ordering, we list model-matched parts for 10658129700 on this page, and you can also search by model number on Sears PartsDirect.

Last updated: February 2026

On Kenmore model 10658129700, a bad compressor usually shows up as poor cooling with the unit running longer than normal, repeated clicking as it tries to start, or abnormal heat at the compressor area. First rule out normal “new” operating sounds and basic power or control issues using the 10658129700 owner's manual.

Many “compressor” complaints are caused by power, settings, airflow, or normal high-efficiency operation.

• Confirm the refrigerator has power (outlet works, breaker not tripped).
• Make sure the temperature controls are turned on and set correctly.
• If it is a new install or was unplugged, allow 24 hours to cool completely.
• Expect longer run times in warm rooms, after loading groceries, or with frequent door openings.
• Listen for normal sounds like pulsating (compressor/fans adjusting) or refrigerant gurgling.

These signs are more consistent with a compressor that is failing to start or run properly.

• Clicking every few minutes (start device tries, then trips off)
• Runs constantly but temperatures stay warm in both fresh food and freezer
• No steady compressor hum when cooling is needed (only brief attempts)
• Compressor shell extremely hot to the touch after repeated start attempts
• Breaker trips when the compressor tries to start

A compressor diagnosis is usually confirmed with electrical checks (continuity, amperage draw) and start-circuit inspection.

If testing confirms the compressor itself is failed, the replacement compressor for this model is refrigerator compressor W10309990.

A compressor is the heart of the cooling system. Misdiagnosing it can lead to unnecessary cost, because normal high-efficiency run time, fan noise, or a simple control or power issue can look like a compressor failure.

You can order model 10658129700 parts from the parts list for this refrigerator, or search by model on Sears PartsDirect.

Last updated: February 2026

If the ice maker on your Kenmore 10658129700 isn’t making ice, the most common causes are the ice maker being switched off (wire shutoff arm up), the water shutoff valve being closed, or restricted water flow from a kinked supply line. Confirm the on/off arm position and water supply first, then move to valve and filter checks using the owner's manual.

• Make sure the wire shutoff arm is down (ON); the bin can lift it up when full.
• Verify the refrigerator is connected to water and the shutoff valve is fully open.
• Inspect the 1/4-inch water line behind the unit for kinks, pinches, or crushing.
• If this is a new install or the ice maker was just turned on, wait 24 hours for the first ice and up to 72 hours for full production.
• Discard the first three batches of ice after startup or service.

Restricted water flow can stop the ice maker from filling properly.

• If your water quality needs it, the manual notes the ice maker has a built-in strainer, but a second strainer can be installed in the 1/4-inch line.
• Replace an overdue water filter; a clogged filter can reduce flow to the ice maker.
• If the dispenser water is also weak or stops, the inlet valve is a prime suspect.

An ice maker depends on steady water pressure and correct shutoff arm position. Fixing a simple kinked line or closed valve prevents unnecessary part replacement and helps restore normal ice production quickly.

We list model-matched replacement parts for Kenmore 10658129700 on this page; you can also search by model number on Sears PartsDirect if you are shopping for additional items.

Last updated: February 2026

The Kenmore side-by-side refrigerator model 10658129700 is 35 5/8 inches wide (overall cabinet width). For installation planning, also account for door swing and any handle projection; the dimension diagram in the 10658129700 owner's manual shows the full footprint.

Use the measurement that matches what you are trying to fit:

• Overall cabinet width: the main box width (35 5/8 in. for 10658129700)
• Overall width with doors/handles: can be wider than the cabinet
• Opening (cutout) width: the space between cabinets or walls
• Door swing clearance: space needed so doors open fully

This Kenmore side-by-side style uses standard ventilation and wall-clearance rules:

• Allow 1/2 inch on each side and at the top for airflow
• If installed next to a fixed wall, allow 2 inches minimum on the hinge side so doors can swing open
• If the unit has an ice maker, leave extra space behind for the water line connection

Using the correct width prevents airflow restriction (poor cooling), avoids cabinet rubbing, and ensures the doors open far enough to remove shelves and bins.

Last updated: February 2026