Frigidaire FFEF3050LSK electric range Parts

Yes. Looking up parts by model number is the most accurate way to get compatible replacement parts for your Frigidaire electric range, including model FFEF3050LSK. Start by finding the model and serial plate on the range, then use the full model number to match parts exactly.

On this Frigidaire range, the model and serial plate is typically located in the open storage drawer area, or behind the lower front panel on some versions. The FFEF3050LSK owner’s manual shows the serial plate location and other product record details.

Tips for recording it correctly:

• Copy the model number exactly as printed (letters and numbers).
• Include any suffix letters; they matter for part compatibility.
• Record the serial number too; it can help narrow revisions.
• Take a clear photo of the data plate for reference.

Ranges often have multiple versions that look the same but use different components (switches, elements, controls, wiring). Using FFEF3050LSK helps ensure the part you order matches mounting, terminals, and electrical ratings.

If you are troubleshooting heating or control issues, these are examples of parts that are commonly searched by model number:

• Range bake element 316413800 (oven not heating in bake)
• Range broil element 316203301 (broil not working)
• Frigidaire range oven temperature sensor 316490000 (temperature inaccurate)
• Surface element control switches (burner heat problems)

Ordering by model number reduces returns and downtime because it aligns the part to your exact Frigidaire configuration, not just the appliance type.

Last updated: February 2026

For a Frigidaire electric range like model FFEF3050LSK, the model number is printed on the appliance’s serial plate; the most common spot is behind the storage drawer (pull it out and look on the frame), and some versions place it behind the lower front panel. Use a flashlight and write the full letter and number string.

Check these locations in this order:

• Behind the storage drawer: pull the drawer out and look on the frame area behind it
• Behind the lower front panel (kick panel): remove the panel and look for the serial plate
• Oven door frame area: open the oven door and inspect the front frame edges
• Inside the oven cavity side wall: look along the left or right interior wall for a rating label

For the exact label location and what the plate looks like on your version, use the FFEF3050LSK owner’s manual.

Model numbers are easy to misread, so we recommend:

• Copy the model number exactly as shown (letters and numbers)
• Watch for look-alikes such as 0 (zero) vs O (letter O) and 1 vs I
• Record the serial number too; it helps confirm the correct parts list
• Take a clear photo of the plate before ordering parts

Frigidaire ranges can have small design changes within the same series; using the exact model number helps us match the correct bake element, surface element control switch, oven temperature sensor, and control board for your appliance.

Last updated: February 2026

The most common problems we see on the Frigidaire FFEF3050LSK electric range are surface burners not heating correctly, the oven not baking at the right temperature, and control or display issues. These symptoms usually trace to a failed heating component, a temperature-sensing problem, or a worn control part.

• One surface element will not heat or only heats on certain settings: failed infinite switch such as a range surface element control switch 316436001 or a bad radiant element.
• Small burner will not regulate heat: failed Frigidaire range small surface element control switch 316436000.
• Oven temperature is inaccurate, takes too long to preheat, or swings hot/cold: failed Frigidaire range oven temperature sensor 316490000 or a weak bake element.
• Oven will not bake but broil works: failed range bake element 316413800.
• Broil will not heat: failed range broil element 316203301.
• Clock, beeping, or keypad problems: control or overlay issues (often paired with wiring checks).

1. Confirm the range has proper power (a range needs full 240 volts for normal heating).
2. Try a different burner and a different knob setting to isolate a single element vs. a control issue.
3. For oven complaints, run a simple temperature check with an oven thermometer across multiple cycles.
4. Inspect for obvious heat damage at the terminal block and wiring connections.
5. Use the wiring diagram and diagnostics in the FFEF3050LSK owner’s manual to match symptoms to tests.

Accurate diagnosis prevents repeat failures and protects other components. For example, a weak bake element can mimic a sensor problem, and a failing infinite switch can overheat a radiant element.

Last updated: March 2026