Owner’s manual
What is the list of vacuum cleaner parts?
For the Craftsman wet/dry vacuum model 113177611, the parts list is the set of replaceable and serviceable components that make the vacuum run, seal, filter, and move air. Exact item names vary by configuration, so we use the 113177611 owner’s manual to confirm what your unit uses.
Common parts you will see on a wet/dry vacuum
Most wet/dry vacuums are built around airflow, filtration, and sealing. Typical parts include:
- Motor and fan (impeller) assembly
- Power switch, cord, and internal wiring
- Tank (canister) and lid (motor head)
- Latches, handles, and casters/wheels
- Hose, hose cuffs, and extension wands
- Nozzle attachments (utility nozzle, crevice tool, squeegee style tools)
- Filter system (cartridge filter, foam sleeve for wet pickup, filter nut/cage depending on design)
Parts that are “consumables” vs. “hard parts”
Some items are replaced routinely; others are replaced only when damaged.
| Part type | Examples | When you typically replace it |
|---|---|---|
| Consumables | Filters, foam sleeves, small gaskets | Loss of suction, odor, visible damage, won’t clean out |
| Hard parts | Hose, tank, latches, switch, cord | Cracks, leaks, electrical failure, broken fitment |
Why the exact list can differ (even within the same model family)
For model 113177611, the most reliable way to identify the correct parts breakdown is to match what you physically have (tank size, lid style, hose diameter, filter mount style) to the diagrams and notes in the 113177611 owner’s manual.
Why it matters
Using the correct filter style, hose diameter, and seals prevents suction loss, dust bypass (fine debris getting past the filter), and air leaks that can make the motor work harder.
Last updated: January 2026
Where to find model number on Craftsman Wet Dry Vac?
On the Craftsman wet/dry vacuum model 113177611, the model number is typically printed on the product identification label (rating plate) attached to the vacuum body. Check the outside of the canister and the upper motor housing area first; the label usually lists both the model and serial number.
Where to look on model 113177611
Start with these common label locations on Craftsman wet/dry vacuums:
- Front or side of the canister (upper half of the tank)
- Back of the canister near the cord wrap or accessory storage
- On the motor head (power unit) near the handle or switch
- Near the caster base or lower rear area of the tank
- Under a latch area where the motor head locks onto the canister
If the label is dirty or scuffed, wipe it with a damp cloth and mild soap, then dry it fully before plugging the vacuum back in.
What the label looks like (and what to copy)
The label is usually a small sticker or metal plate with several lines of text.
| What to record | Example for this vacuum | Why you need it |
|---|---|---|
| Model number | 113177611 | Ensures diagrams and parts match |
| Serial number | Varies | Helps identify production run |
| Electrical rating | Varies | Helps confirm motor and switch specs |
For parts lookup and repair instructions, we recommend matching the full model number exactly.
Why it matters
Craftsman wet/dry vacuums can look similar across multiple model series, but hoses, filters, casters, latches, and motor components can differ. Using the correct model number (113177611) helps prevent ordering the wrong replacement part and speeds up troubleshooting.
For additional identification tips and diagrams, use the 113177611 owner’s manual.
Last updated: January 2026
How do you remove the filter from a Craftsman wet dry vac?
On the Craftsman 113177611 wet/dry vacuum, you typically remove the filter by unplugging the vac, taking off the powerhead (motor lid), then pulling the filter straight off the filter cage or mount. If it feels stuck, twist gently while pulling.
Safe filter removal steps
- Unplug the wet/dry vacuum before opening it.
- Release the latches and lift off the powerhead.
- Locate the filter on the filter cage (center area of the tank).
- If there is a retaining nut or cap, remove it first.
- Pull the filter straight off; use a gentle twist if needed.
- Tap debris into a trash bag before carrying the filter through the house.
What you might see on this model (and what it means)
Filter attachment details can vary within the Craftsman 113177611 model family depending on the exact filter style installed (cartridge, foam sleeve, or a dry-pickup style). We use the 113177611 wet/dry vacuum manual to confirm the correct filter style and any retainer hardware for your exact configuration.
| What’s holding the filter | What to do | Common mistake to avoid |
|---|---|---|
| Retaining nut/cap | Remove it, then slide filter off | Forcing the filter before removing the retainer |
| Snug friction fit on cage | Twist slightly, pull straight | Yanking sideways and cracking the filter cage |
| Wet foam sleeve style | Slide sleeve off evenly | Tearing foam by pulling from one edge |
If the filter will not come off
- Check for a hidden retainer (cap, wing nut, or ring) at the end of the filter.
- Look for caked dust acting like glue; tap the filter to break the seal.
- If it is a wet filter, let it dry slightly so it releases more easily.
- Inspect the filter cage for damage or warping that could bind the filter.
Why it matters
Removing the filter correctly helps protect the motor, restores suction, and prevents dust leaks around the seal. It also reduces the chance of breaking the filter cage or tearing the filter media.
Last updated: January 2026
