How do I figure out what water filter I need for my Kenmore fridge?
For Kenmore model 10658903802, the correct way to identify the water filter is to match the filter style used in the base grille water filtration system shown in the 10658903802 owner's manual. For this model, a compatible replacement filter option is the genuine Kenmore refrigerator water filter EDR3RXD1.
- Check the refrigerator model tag inside the fresh food compartment and match it to 10658903802.
- Look at the filter location: this model uses a base grille filter with an eject button and a filter cap.
- Replace the filter at least every 6 months, or sooner if water flow drops noticeably.
- Keep the filter cap; it transfers to the new cartridge (do not throw it away).
- After installing the new filter, flush the water system to clear air and carbon fines.
The manual describes a base grille cartridge that installs by pushing the new filter into the opening until fully engaged, then checking it is secure by gently pulling on the cap.
| Step | What you do | What you should see |
|---|---|---|
| Remove old filter | Press eject button, pull on cap | Filter releases from base grille |
| Move cap to new filter | Turn cap counterclockwise to remove, then install on new cartridge | Cap seats on new filter |
| Install new filter | Push in until engaged | Eject button pops back out |
| Flush system | Dispense water 5 sec on, 5 sec off | Water starts flowing, spurting stops |
Using the correct Kenmore refrigerator water filter for 10658903802 protects water taste and flow, helps the ice maker fill properly, and prevents leaks caused by mismatched O-rings or an incorrect cartridge fit.
Last updated: February 2026
How many cubic feet is the Kenmore refrigerator model 10658903802?
The Kenmore side-by-side refrigerator model 10658903802 is typically in the 22 to 25 cubic feet total-capacity class for a 36-inch side-by-side. For the exact cubic-foot rating for your specific configuration, confirm it in the 10658903802 owner's manual.
Use these quick checks to get the precise number for 10658903802:
- Look in the specifications section of the 10658903802 owner's manual
- Check the model and serial tag inside the fresh-food compartment; it often lists key specs
- If your manual includes a “performance data sheet” or “product data” section, capacity is commonly listed there
- Compare only to other Kenmore 106-series side-by-side models when estimating
Side-by-side refrigerators are commonly grouped by cabinet width and overall storage volume.
| Side-by-side size class | Common width | Typical total capacity |
|---|---|---|
| Compact | 32 to 33 in. | 18 to 21 cu. ft. |
| Standard | 35 to 36 in. | 22 to 25 cu. ft. |
| Large | 36+ in. | 25 to 29 cu. ft. |
Even when you know the cubic feet, real storage depends on the internal layout.
- Ice maker and ice container reduce usable freezer volume
- Door bins and shelf spacing affect how bulky items fit
- Air channels and the evaporator cover take up interior space
- Water filter housing can reduce shelf depth in some designs
Cubic feet is the best single number for comparing overall storage between refrigerators, but it does not tell you how well your groceries will fit. Confirming the exact rating helps when replacing the unit or planning kitchen space.
Last updated: February 2026
How wide is a Kenmore side-by-side refrigerator?
For Kenmore side-by-side refrigerator model 10658903802, plan on a 36-inch minimum cabinet cutout width for installation. Many side-by-side refrigerators are about 36 inches wide overall, but the exact exterior width can vary by model and door style; confirm in the 10658903802 owner's manual.
- Minimum cabinet opening (cutout) width: 36 in (91.44 cm)
- Extra clearance for door swing: leave at least 2 in (5.08 cm) next to a fixed wall (varies by setup)
- Ventilation clearance: allow 1/2 in (1.25 cm) on each side and at the top
- If you want to remove crisper pans with an extended wall nearby: a 54 in opening is commonly recommended (36 in cutout plus extra side space)
| Measurement | What it’s used for | Typical value for this style |
|---|---|---|
| Cabinet cutout width | Ensures the refrigerator fits between cabinets | 36 in minimum |
| Exterior case width | The actual refrigerator body width | Often around 36 in |
| Door swing clearance | Space so doors open fully without hitting a wall | Often 2 in+ at the hinge side |
- Measure the opening between cabinets at the front and back.
- Measure the tightest point (molding, trim, or countertop overhang can reduce space).
- If the refrigerator sits next to a wall, measure hinge-side clearance for door swing.
- Measure the path into the kitchen (doorways, hallways, turns) before moving the unit.
Using the correct width prevents installation problems like doors that cannot open fully, poor airflow that hurts cooling performance, and difficulty removing drawers and shelves for cleaning.
Last updated: February 2026
What's the average lifespan of a Kenmore refrigerator?
Most Kenmore refrigerators average 10 to 15 years of service life. For a Kenmore side-by-side like model 10658903802, lifespan depends most on routine maintenance (coil cleaning, door seal condition, and keeping airflow clear) and fixing cooling or ice-maker issues early using the 10658903802 owner's manual.
- 10 to 15 years: typical for most refrigerators with normal use
- 15 to 20 years: common when condenser coils are kept clean and temperatures stay stable
- Under 10 years: more likely when coils are clogged with dust, doors do not seal, or the unit runs hot
| Appliance type | Typical lifespan | Biggest life-shortener |
|---|---|---|
| Side-by-side refrigerator | 10 to 15 years | Dirty condenser coils and poor airflow |
| Top-freezer refrigerator | 12 to 18 years | Door seal leaks and overloading |
| French door refrigerator | 10 to 15 years | Ice maker and dispenser wear |
We recommend these habits for Kenmore refrigerators:
- Vacuum and brush condenser coils regularly (more often with pets)
- Keep door gaskets clean; replace if torn or not sealing
- Set stable temps (about 37°F fresh food, 0°F freezer)
- Leave space for airflow around the cabinet and vents
- Replace water filters on schedule to protect the water system
If your model uses a cartridge filter, the correct replacement is the genuine Kenmore refrigerator water filter EDR3RXD1.
A refrigerator that runs longer than it should (from dirty coils, warm ambient temps, or air leaks) cycles more, builds more frost, and puts extra strain on the sealed system and controls. Simple upkeep often prevents “no cool,” warm freezer, and ice-maker performance problems.
Last updated: February 2026





