Craftsman 113177650 wet/dry vacuum Parts

You can buy replacement parts for your Craftsman 113177650 wet/dry vacuum by using the model number to match the correct diagrams and part listings, then ordering through our parts catalog. For broader Craftsman parts searches by model, we also offer lookup and ordering through Sears PartsDirect.

Best way to make sure you get the right part

Using the exact model number (113177650) is the fastest way to avoid ordering the wrong filter, hose, switch, or motor component.

• Match the model number on the vacuum’s data label to 113177650
• Use the exploded-view diagrams to identify the exact part name you need
• Compare your old part’s shape, mounting points, and electrical connectors (if applicable)
• If your vacuum has multiple configurations, confirm the correct version in the parts breakdown
• Keep your serial number handy when you review the diagrams (it can help narrow variations)

What you’ll typically replace on a wet/dry vacuum

Wet/dry vacuums commonly need wear items and airflow-related parts replaced first.

Part type	Common symptom	What to check first
Filter	Low suction, dust blow-by	Clogged media, torn seal, wrong fit
Hose and fittings	Weak pickup, whistling leaks	Cracks, loose cuffs, crushed sections
Switch	Won’t start, intermittent power	Loose terminals, heat damage
Motor components	Loud noise, burning smell	Blockage, worn brushes (if equipped)

Why it matters

Ordering by model number helps ensure the part fits your Craftsman 113177650 correctly, seals properly for suction, and matches the electrical ratings for safe operation.

Helpful reference

For model-specific identification details and diagrams, use the 113177650 owner’s manual.

Last updated: February 2026

For the Craftsman 113177650 wet/dry vacuum, the parts list is the set of components that create suction, capture debris, and route airflow safely. Most wet/dry vacs use the same core groups of parts; use the 113177650 owner's manual to match names to your exact configuration.

Common wet/dry vacuum parts (what you will typically see)

• Motor and fan (impeller): generates airflow and suction
• Power switch and power cord: controls and supplies power to the motor
• Tank (collection canister): holds dry debris or liquid pickup
• Lid or motor head: houses the motor, switch, and seals to the tank
• Filter and filter cage: traps fine dust; often different setups for wet vs. dry pickup
• Float or shutoff: helps prevent overfilling during wet pickup
• Hose: main airflow path from tool to tank
• Wands and nozzles: extend reach and adapt to floors, crevices, and upholstery
• Casters/wheels: mobility and stability
• Gaskets, seals, latches, and clamps: prevent air leaks that reduce suction

Quick “parts list” by function

Function	Parts you’ll look for	Symptoms when worn or missing
Suction/airflow	motor, fan, hose, lid seal	weak suction, loud airflow leaks
Filtration	filter, filter cage, gasket	dust blow-by, clogged airflow
Wet pickup safety	float/shutoff, seals	water reaching motor head
Reach/cleaning	wands, floor nozzle, crevice tool	poor pickup on certain surfaces

Why it matters

Knowing the part group helps you troubleshoot faster. For example, low suction is usually a filter restriction or an air leak at the hose, lid, or tank seal, not a “bad tank.”

Ordering and matching the right parts

• Confirm the model number is 113177650 on the data plate
• Use the exploded views and part names in the 113177650 owner's manual
• Replace filters on schedule; clogged filters are the most common suction killer
• When shopping, search by model number on Sears PartsDirect to avoid mismatches

Last updated: February 2026

To remove the filter on your Craftsman 113177650 wet/dry vacuum, we first unplug the vacuum, open the powerhead (motor lid), then release the filter retainer (often a knob, nut, or screw) and lift the filter straight off the cage. For your exact retainer style, use the 113177650 owner's manual.

Steps to remove the filter safely

• Unplug the wet/dry vacuum and let the motor cool if it was just used.
• Release the latches and lift off the powerhead (motor lid).
• Locate the filter on the filter cage (center of the tank opening).
• Remove the filter retainer (commonly a plastic knob, wing nut, or a single screw).
• Slide the filter off the cage; keep it upright to avoid dumping debris.
• If the filter is stuck, gently twist it while pulling; do not pry against the cage.

What to check while the filter is off

A wet/dry vacuum filter that is hard to remove or looks damaged usually points to a fit issue, heavy dust loading, or moisture exposure.

What you see	What it usually means	What we recommend
Filter packed with fine dust	Airflow restriction	Tap off debris outdoors; replace if airflow stays weak
Filter damp or stained	Picked up moisture with a dry filter installed	Let the tank and filter dry fully before reinstalling
Filter won’t slide off easily	Dust caked on the cage or retainer overtightened	Clean the cage, then reinstall hand-tight only
Tears or loose end caps	Filter can’t seal	Replace the filter before using again

Why it matters

Removing the filter correctly protects the filter cage and helps maintain suction. A torn or wet filter can reduce airflow, strain the motor, and allow debris to reach the blower path.

Getting the right replacement filter

For Craftsman 113177650, match the replacement by model number and the filter’s mounting style (retainer type and cage diameter). We recommend starting with the parts list for your model, then using Sears PartsDirect to search by model number if you are comparing options.

Last updated: February 2026

On a Craftsman 16-gallon wet/dry vacuum, the model number is printed on the product identification label attached to the vacuum body or power head; it is most often on the upper portion of the tank near the rim where the motor (power head) latches on. Use that exact model number to match the correct parts list.

Where to look first

Check these common label locations on 16-gallon shop vacs:

• Front of the tank, upper half just below the rim
• Back of the tank, upper half near the handle area
• Under the power head (unlatch the motor head and look around the tank rim)
• On the power head near the switch, cord wrap, or motor housing
• Near the caster base area on the lower tank (less common)

What to write down from the label

Record the full model number exactly as shown (including any dots, dashes, or suffixes) plus the serial number.

Label item	What it’s used for	What it can look like
Model number	Ensures correct diagrams and replacement parts	Numbers with optional dots or suffixes
Serial number	Helps identify production run/version	Letters and numbers
Electrical rating	Confirms motor requirements	Volts/amps

If the label is missing or unreadable

Use these practical options to still identify the vacuum:

• Check for a second label on the power head; many units place it there
• Look for faint, embossed, or stamped characters on the tank near the rim
• Compare your vacuum’s latch style, hose port shape, and filter mount to the illustrations in the 113177650 owner's manual to understand common label locations and component naming (then match your exact model number to the correct parts breakdown)

Why it matters

Craftsman wet/dry vacuums in different gallon sizes can look similar; the exact model number prevents ordering the wrong filter, hose, latch, or tank seal.

For parts lookup, start with the model-specific parts list when you have the model number; you can also search by model on Sears PartsDirect.

Last updated: February 2026