Craftsman 917258890 tractor Parts

Yes, many Craftsman mowers and lawn tractors use Briggs and Stratton engines, but it depends on the specific model and production year. For Craftsman model 917258890, the engine brand is determined by the engine model tag on the engine itself, not by the tractor model number.

Check the engine identification label (usually on the blower housing, valve cover, or near the starter). Record the engine brand and the model-type-code (Briggs) or the equivalent ID (other brands).

• Look for a Briggs and Stratton logo and a model number format like 12H802-xxxx-xx
• If you see Kohler, Kawasaki, or another brand, use that brand’s engine ID format
• Match parts by the engine model, not just the tractor model
• If the label is dirty, wipe it clean and use a flashlight to read stamped characters
• If the label is missing, the engine shroud or valve cover sometimes has a stamped ID

Craftsman tractors were commonly built by major OEMs and could be sold with different engine options over time. That means two Craftsman tractors can look similar but use different engines and tune-up parts.

If you are troubleshooting operation issues (like the blades not engaging), the problem can be outside the engine. For example, a faulty PTO switch can prevent the electric clutch from engaging.

• Inspect wiring connectors for corrosion or looseness
• Check safety interlock switches (seat, brake, PTO)
• Verify the PTO switch clicks and feels consistent
• If the PTO switch is damaged or intermittent, replace it with the correct part

Helpful part reference: switch.pto.3 582107601

Using the correct engine brand and engine model number prevents wrong tune-up parts (air filter, fuel filter, spark plug) and speeds up repairs when the tractor cranks, clicks, or won’t start.

For starting symptoms, we recommend: riding lawn mower engine clicks but doesnt turn over video

Last updated: January 2026

For a Craftsman riding lawn tractor like model 917258890, a full engine replacement typically costs $260 to $1,800 installed, depending on the engine type, labor rates, and whether extra items (belts, pulleys, wiring) are needed during the swap.

• Engine price (new vs. rebuilt, horsepower, shaft size, charging system)
• Labor time (most riding mower engine swaps run about 5 to 8 hours)
• Extra parts discovered during teardown (worn belts, mounts, fuel lines)
• Shop fees (pickup/delivery, disposal, diagnostics)
• Season and local rates (spring demand often increases scheduling and labor costs)

We recommend ruling out common “no start” causes first, because they are often cheaper than an engine:

• Weak battery or bad battery cables
• Faulty starter solenoid or starter
• Safety interlock issue (brake, seat, PTO)
• Fuel delivery problem (stale gas, clogged line)
• Ignition issue (spark plug, coil)

A fast first check is whether the engine clicks, spins but will not start, or does nothing. The steps in riding lawn mower engine clicks but doesnt turn over video help narrow that down.

An engine replacement can cost close to the value of an older tractor. Confirming the failure first helps you avoid spending hundreds on an engine when the real fix is a switch, battery, or fuel issue.

Last updated: January 2026

Your Craftsman riding mower model number is printed on a product ID label (model and serial tag) attached to the tractor frame. On model 917258890, check the common label locations below, then match the full number exactly when ordering parts.

Check these spots in order (labels are usually a sticker or metal tag):

• Under the seat on the seat pan or fender deck
• On the rear fender near the seat (left or right side)
• On the frame rail near the engine compartment
• Under the hood near the dash tower or steering column area
• Near the transaxle on the rear frame

Look for these fields on the tag so you capture the right information:

• Model number (for this tractor, it should read 917258890)
• Serial number (helps identify production run)
• Sometimes an engine model/type/code (engine parts use this, not the tractor model)

Use the tractor model number for chassis and deck parts; use the engine numbers for engine-specific parts.

A single digit difference can change the correct diagrams and parts list. Using the exact model number helps ensure the right fit for items like the lawn tractor ignition switch 532140301 or the lawn tractor ground drive belt, 1/2 x 84-1/2-in 532140218.

Last updated: March 2026