Kenmore Elite 79041023801 electric range Parts

On Kenmore Elite electric range model 79041023801, the model and serial number are printed on the serial plate on the oven front frame, typically behind the oven door. On some versions, the serial plate is behind the drawer. Confirm the exact location in the installation guide.

Where to look on the range

Check these common label locations first:

• Open the oven door and look along the front frame/door jamb area
• Look behind the oven door on the front frame (most common)
• Pull out the storage or warmer drawer and look on the frame behind it (some models)
• Use a flashlight and look for a silver or white serial plate with printed numbers

What to write down (and why)

Record the information exactly as shown on the serial plate:

• Model number (for example, 79041023801)
• Serial number
• Lot number or letter (often printed on the same plate)

Why it matters

We use the model number to match the correct Kenmore Elite range parts and diagrams. The serial and lot information helps narrow down version changes so you get the right fit the first time.

Quick checklist if you still do not see it

Try these steps in order:

1. Make sure the oven is OFF and cool.
2. Open the door fully and inspect the front frame on both sides.
3. Remove the drawer and inspect the frame behind the drawer opening.
4. Wipe grease or residue off the plate so the numbers are readable.

Common locations at a glance

Location	What you will see	How to access
Oven front frame behind door	Serial plate with model and serial	Open oven door
Behind drawer (some models)	Serial plate with model and serial	Pull drawer out

If you are ordering replacement parts after you find the model number, you can shop by model on this page or search by model on Sears PartsDirect.

Last updated: February 2026

The Kenmore Elite 79041023801 is a 30-inch slide-in electric range. For planning cabinet and countertop fit, the installation specs call for a 30-inch opening width and a minimum 22 7/8-inch cutout depth (up to 23 1/4 inches max); allow at least 19 1/4 inches in front for the oven door to open. See the installation guide for the exact cutout and clearance diagram.

Key size and clearance numbers (installation)

Use these measurements when you are checking whether the range will fit your kitchen opening:

• Opening width: 30 inches
• Cutout depth: 22 7/8 inches minimum; 23 1/4 inches maximum
• Door clearance (front): at least 19 1/4 inches for door depth when open
• Cabinet clearance (unprotected): 30 inches minimum
• Height under cooktop (leveling legs): typically 35 5/8 inches minimum to 36 5/8 inches maximum

What “30-inch range” means (and what to measure)

A “30-inch” range is designed to fit a 30-inch-wide cabinet opening, but the best way to avoid surprises is to measure three spots:

• Width of the opening at the front and back (cabinets are not always perfectly parallel)
• Depth from the back wall to the front of the countertop cutout
• Front clearance so the oven door can open fully without hitting an island, drawer pull, or nearby appliance

Quick fit checklist

What you’re checking	Target for model 79041023801	Why it matters
Cabinet opening width	30 inches	Prevents side-to-side binding
Cutout depth	22 7/8 to 23 1/4 inches	Keeps the range from sticking out too far
Door swing clearance	19 1/4 inches minimum	Ensures the door opens safely

Why it matters

Correct cutout width, depth, and door clearance prevent installation stress on the cooktop glass and help the range sit level on its leveling legs, which supports even baking and stable cookware on the surface elements.

You can also order replacement parts for your Kenmore Elite 79041023801 from the parts list for this model, or search by model number on Sears PartsDirect.

Last updated: February 2026

To reset your Kenmore Elite electric range model 79041023801, we use the control’s “clear settings” function: press and hold the recipe/setting key for about 6 seconds until you hear a beep, then press Start once. This restores factory-default control adjustments (including clock format, tones, and temperature offsets). See the owner's manual for the exact keypad name on your console.

Reset options that work on this model

Use the option that matches what you are trying to fix.

• Factory reset (control adjustments reset): Press and hold the recipe/setting keypad for 6 seconds (until the first beep), then press Start once.
• Cancel a cooking cycle: Press Clear/Off (or the cancel key) to stop Bake, Broil, or timed cooking.
• Unlock the oven (lockout reset): Press and hold the Oven Lockout keypad for 3 seconds until “Loc” clears and the door unlocks.
• After Self-Clean: The door stays locked until the oven cools for about 1 hour; then it unlocks automatically.

What a “reset” changes (and what it does not)

A factory reset on the control is meant to clear stored settings and return control preferences to defaults.

Reset type	What it fixes	What it does not fix
Factory reset (6-second hold + Start)	Odd beeps, changed clock format, Celsius/Fahrenheit setting, control preferences, temperature offset	Heating failures caused by a bad sensor, element, or wiring
Lockout toggle (3-second hold)	“Loc” or “DOOR LOCKED” from lockout mode	A door that is locked because the oven is still hot from Self-Clean
Power cycle (breaker off/on)	Frozen display, glitchy keypad response	Repeated error codes caused by a failing part

Why it matters

Resetting the control is the fastest way to clear accidental programming and restore default settings. If the oven still will not heat or keeps overheating after a reset, the issue is usually in a component such as the frigidaire range oven temperature sensor 316217002 or related wiring.

If the oven still acts up after the reset

• Turn off the range breaker for 1 minute, then restore power.
• Confirm the oven is not in Lockout mode (“Loc”).
• If temperatures are consistently off, use the manual’s oven temperature adjustment steps.
• If you suspect a sensor problem (overheating, underheating, long preheat), inspect and test the sensor circuit.
• For parts ordering, use the parts list for model 79041023801 or search by model on Sears PartsDirect.

Last updated: February 2026

If your Kenmore Elite electric range 79041023801 is not working, the most common causes are a tripped double breaker, a loose/failed power connection, or an electronic control fault. Start by confirming full power to the range, then narrow it down to oven-only or a single surface element.

Quick checks first (no tools)

• Make sure the cord/plug is fully seated.
• Reset the range breaker(s); electric ranges use a double breaker and one side can trip.
• If the control is beeping and shows an F-code (such as F10, F30, or F90), press STOP to clear it; if it returns, write the code down.
• If only one burner fails, try a different pan and a different element setting.
• Use the troubleshooting section in the 79041023801 owner's manual.

Narrow down the failure

What is not working	Most likely cause	What to check next
Nothing works (no display, no heat)	Power supply/connection	Breaker, outlet, cord, terminal block
Oven heats poorly or is inaccurate	Sensor or airflow issue	Sensor test, calibration, fan operation
One surface element will not heat	Element or control circuit	Element continuity, relay/control output

Parts that commonly fix “not working” symptoms

• If the range is dead or power is intermittent, inspect the terminal block 5304409888 for heat damage or loose lugs.
• If the oven temperature is erratic or the oven will not regulate heat, test the frigidaire range oven temperature sensor 316217002.
• If one burner stays cold while others work, the cooktop element 318297810 is a common replacement.
• If multiple surface elements fail or act unpredictably, the frigidaire range surface unit power relay board 316442119 is a common control-side suspect.

Why it matters

This model needs full 240V power for heating; a partial power loss can leave lights or the clock working but stop the oven and elements from heating. Pinpointing whether the issue is whole-range, oven-only, or one element prevents replacing the wrong part.

You can order replacement parts for 79041023801 from the parts list for this model, or search by model number on Sears PartsDirect.

Last updated: February 2026