Kenmore 11096374210 electric dryer Parts

Your Kenmore dryer’s model number is printed on the appliance ID tag, usually around the door opening. For Kenmore model 11096374210, you will typically find the tag on the inner door frame or just inside the front panel opening when the door is open.

Where to look on a Kenmore dryer

Check these common ID-tag locations (in order):

• Inside the dryer door opening on the cabinet frame (most common)
• On the back panel of the dryer cabinet
• Along the side panel near the top edge
• Behind the lower front access panel (on some designs)
• On the door itself near the hinge area (less common)

What the model number looks like (and why it matters)

Kenmore model numbers are usually a long string of numbers. Many Kenmore dryers start with a 110 prefix, which helps narrow down the correct parts and diagrams for your exact build.

Model number vs. serial number

Use this quick comparison so you record the right number:

Item	What it tells you	Used for
Model number	Exact design and parts match	Ordering parts, diagrams, troubleshooting
Serial number	Production sequence and build info	Service history, identifying a specific unit

Tips to avoid ordering the wrong part

Once you find the tag, write the model number exactly as shown (including all digits). Then match parts to that model.

• Copy the full model number, not just the first 3 digits
• Take a clear photo of the tag before you start a repair
• If a part looks similar, still match by model number first
• Use the parts list for 11096374210 to confirm fit

Example of a commonly replaced part

If your dryer squeals or the drum will not turn, a worn belt is a common cause; for this model, see the drum belt 341241.

Why it matters

Kenmore used multiple manufacturers over the years, and parts can vary even when dryers look the same. Using the exact model number (like 11096374210) is the fastest way to get the correct Kenmore electric dryer parts the first time.

Last updated: February 2026

Yes, it’s usually worth replacing the heating element in your Kenmore 11096374210 electric dryer when the dryer is otherwise in good shape. A new element typically restores heat for far less than the cost of a replacement dryer, and it can add years of usable life.

When replacement makes the most sense

• The drum turns and airflow feels strong, but there’s little or no heat
• The dryer is drying slowly and the venting is confirmed clear
• The rest of the dryer is in good condition (door closes well, timer advances, no major noise)
• You can do basic DIY work safely (or you’re already paying for a service call)

A common replacement part for this model is the element 279838.

When it’s smarter to look deeper than the element

A burned-out element is common, but it’s not the only cause of “no heat.” Before ordering parts, we recommend checking the heating circuit and airflow issues that can overheat components.

• Restricted venting or a clogged lint path (most common root cause)
• Failed thermal cut-off or blown thermal fuse
• High-limit thermostat problems
• Loose or heat-damaged wiring at the heater terminals

Parts that often come up in “no heat” repairs include the cut-off kit 279816, the dryer high-limit thermostat WP3390291, and the dryer heating element wire kit 279457.

Quick cost and effort comparison

Option	Typical parts cost	Typical outcome	Best for
Replace heating element	Low to moderate	Restores heat if element is open	Dryer runs but won’t heat
Replace cut-off/thermostat parts	Moderate	Fixes heat shutdown or no-heat safety open	Overheating or repeated no-heat
Replace dryer	High	New appliance	Multiple major failures

Why it matters

A dryer that is not heating often has an airflow problem behind it. Fixing the heat issue without correcting venting can cause repeat failures of the element, thermal cut-off, or wiring. Keeping the lint chute and vent system clear also improves drying time and energy use.

For a deeper overview of how the dryer’s systems work together, see what are the main parts of a clothes dryer.

Last updated: February 2026

Common problems we see on Kenmore electric dryers like model 11096374210 are no heat or long dry times, the drum not turning, the dryer not starting, and loud squealing or thumping. Most of these issues trace back to airflow restrictions (lint buildup), normal wear parts, or a failed safety or heating component.

Most common symptoms and likely causes

• No heat or weak heat: failed heating element, open thermal cut-off, or a tripped high-limit thermostat
• Long dry times: clogged lint screen, blocked venting, or a damaged blower wheel reducing airflow
• Drum not turning: broken belt, worn support components, or a motor/pulley problem
• Won’t start: door switch not closing, timer issue, or motor problem
• Loud noise: worn drum support parts, belt wear, or blower wheel damage

Parts that commonly fix these problems (for 11096374210)

If your symptom matches, these are common replacement parts listed for this model:

Symptom	Common part to check	What it does
No heat	Element 279838	Produces heat for drying
Overheats or no heat	Cut-off kit 279816	Safety cut-off for overheating conditions
Long dry times, poor airflow	Dryer blower wheel WP694089	Moves air through the drum and vent
Drum won’t turn	Drum belt 341241	Drives the drum with the motor pulley
Won’t start when door closes	Dryer door switch W10820036	Confirms the door is shut so the dryer can run

Quick checks we recommend before replacing parts

• Clean the lint screen completely and wash off any fabric-softener film.
• Check the vent path for kinks, crushed flex duct, or heavy lint buildup.
• Confirm the dryer is getting full power (electric dryers typically need 240V to heat).
• Listen for motor hum with no drum movement (often belt or motor-related).
• If the dryer runs but heat stops, inspect overheating causes first (airflow, lint chute, vent).

Why it matters

Airflow problems can cause long dry times and overheating, which can repeatedly trip safety devices and shorten the life of the heating system. Keeping the lint path and venting clear helps your Kenmore dryer dry faster and reduces strain on parts like the heater, thermostats, and motor.

Last updated: February 2026