Kenmore Elite 79097473804 electric range Parts

Yes. Kenmore Elite models like the Kenmore Elite 79097473804 are positioned as the brand’s premium line, typically offering more cooking features and upgraded styling than standard Kenmore ranges. For the most accurate feature list for your exact range, use the owner's manual.

What “high end” means for this model

Kenmore Elite generally sits above basic Kenmore models in the lineup. In real-world terms, that usually translates to a better cooking experience and more convenience features for baking, broiling, and cleaning.

Common “premium” traits you’ll see in Elite electric ranges include:

• More precise oven temperature control and calibration options
• Enhanced oven cooking modes (varies by configuration)
• Self-cleaning features and improved insulation
• Higher-output surface elements or multi-ring elements (model dependent)
• More robust control boards and user interface features

How to judge it quickly (practical checklist)

Use these checks to decide if your 79097473804 feels “high end” for your kitchen:

• Performance: Preheats quickly and holds temperature steadily
• Consistency: Bakes evenly without hot spots (after proper rack placement)
• Controls: Buttons/knobs respond reliably; display is stable
• Fit and finish: Door closes firmly; gasket seals well
• Serviceability: Key parts are replaceable when wear happens

Parts that support “premium performance” when maintained

Even high-end ranges depend on a few core components. If performance drops, these parts are common culprits:

Symptom	Often involved part	Example part for this model
Oven temp swings, under/overheats	Oven temperature sensor	Frigidaire range oven temperature sensor 316490000
No bake heat or weak baking	Bake element	Frigidaire range bake element 316505500
Broil not heating properly	Broil element	Frigidaire range broil element 316203301

Why it matters

“High end” is most noticeable in temperature accuracy, even cooking, and reliability over time. Keeping the bake system (sensor and elements) in good shape helps your Kenmore Elite 79097473804 cook like it was designed to.

Last updated: February 2026

The Kenmore Elite electric range model 79097473804 was made in the late 2000s; the owner’s manual for this model family shows a publication identifier ending in 0807, which points to 2007 as the manual’s print date for the 790.9747*, 9748* series. For exact manufacture date, use the serial number date code in the owner's manual.

How to pinpoint the exact manufacture date (using the serial number)

We date Kenmore ranges by decoding the serial number, not the model number alone. On 790 prefix ranges, the serial number format typically includes a date code that identifies the production week and year.

• Find the serial tag (commonly on the oven frame behind the storage or warming drawer, or on the door frame)
• Write down the full serial number exactly as shown
• Use the serial/date-code section in the owner's manual
• Match the letter/number sequence to the year and week chart
• If the label is worn, take a clear photo and compare characters one at a time

Why the manual date matters (and what it does not mean)

The manual’s print date is a reliable clue for the model family’s timeframe, but it is not the same as your unit’s build date.

Item	What it tells you	What it does not tell you
Model number 79097473804	Design and parts family	Exact build week/year
Manual print code ending in 0807	Documentation timeframe (2007)	Your range’s exact manufacture date
Serial number date code	Your range’s actual build date	Parts compatibility by itself

Why it matters

Knowing the build date helps when you are matching replacement parts (like an oven temperature sensor, bake element, or control board) and when you are comparing features across production changes within the same Kenmore Elite series.

Last updated: February 2026

On Kenmore Elite range model 79097473804, the model and serial information is on the serial plate located on the lower right front frame of the appliance; on some units, the plate may also be under the cooktop. The exact location is shown in the installation guide.

Where to look (quick checklist)

• Open the oven door and look along the lower right front frame (front edge of the range body).
• Use a flashlight and look for a silver or white rating plate with model and serial.
• If you do not see it on the frame, check the alternate location under the cooktop.
• If your range has a storage or warming drawer, pull it out fully to improve visibility of the front frame.
• Write down the model number exactly as printed (for example, 79097473804).

Step-by-step: finding the serial plate safely

1. Make sure the oven is off and surfaces are cool.
2. Open the oven door.
3. Inspect the lower right front frame for the rating plate.
4. If needed, remove the drawer for better access and lighting.
5. If the plate is under the cooktop, follow the lifting instructions in the owner's manual before attempting to access it.

What you will see on the label

Label item	What it’s used for	Example format
Model number	Matching parts and diagrams	79097473804
Serial number	Identifying production details	Letters and numbers

Why it matters

Using the exact model number helps us match the correct Kenmore Elite electric range parts (like a bake element, broil element, or oven temperature sensor) and prevents ordering a similar-looking part that will not fit.

Last updated: February 2026

Kenmore is a brand, not a single manufacturer; the Kenmore Elite electric range model 79097473804 was produced for Sears by an OEM (original equipment manufacturer). For this model family (790.9747*, 790.9748*), the design and parts sourcing align with Frigidaire/Electrolux-built ranges, which is why many replacement parts for this unit are listed under Frigidaire part numbers.

How to confirm who built your specific range

We use the model and serial information to match the correct parts and documentation for your exact build.

• Check the model tag for 790.9747* or 790.9748* (the * is the color code)
• Use the parts list for model 79097473804 to see the OEM part families used
• Compare key service parts (sensor, bake element, control) to confirm the platform
• Reference the wiring and feature details in the 79097473804 owner's manual

What “made by” means for parts and repairs

Even when the badge says Kenmore Elite, the OEM determines the internal platform, which affects fit, wiring connectors, and troubleshooting steps.

What you’re doing	Why the OEM matters	Example on this model
Replacing an oven sensor	Connector style and resistance curve must match	Oven temperature sensor 316490000
Fixing no-bake or weak heat	Element shape and mounting points must match	Bake element 316505500
Addressing self-clean door lock issues	Lock motor and switch design is platform-specific	Oven door lock motor and switch assembly 5304528973

Why it matters

Using the correct OEM-matched parts prevents repeat failures, error codes, and installation problems. It also ensures your Kenmore Elite range heats accurately and operates safely after a repair.

Last updated: February 2026