Kenmore 11020872990 washer Parts

A Kenmore washer typically lasts 10 to 15 years. For the Kenmore 11020872990, lifespan depends most on load size, how often it runs, and basic care like keeping it level and using the correct cycle settings; see the 11020872990 owner's manual for routine care and operating guidance.

Most washers reach the 10 to 15 year range when they are installed correctly and not overloaded. The biggest factors that shorten life are chronic vibration, frequent overloading, and running with worn drive or suspension components.

• Usage frequency: multiple loads per day wears drive parts faster
• Load habits: overloading strains the motor, clutch, and gear case
• Installation: an unlevel washer vibrates and loosens components
• Water quality: sediment can reduce inlet valve performance
• Maintenance: catching small issues early prevents bigger failures

These steps match how this style of Kenmore top-load washer is designed to run.

• Keep the washer level and tighten the front leg nuts after leveling
• Avoid wrapping items around the agitator when loading
• Use the right amount of detergent and avoid excessive suds
• Check fill and drain performance; slow drain can stress the drive system
• Stop using the washer if you hear grinding or burning smells; inspect drive components

Replacing a few high-wear parts often restores normal agitation and spin, which can add years of usable life.

A washer near the end of its lifespan often shows small performance changes first (longer cycles, more vibration, weaker spin). Addressing those early helps protect major assemblies like the gear case and drive motor.

If you decide to repair, you can order replacement parts for Kenmore 11020872990 from the parts list for this model, or search by model number on Sears PartsDirect.

Last updated: February 2026

Kenmore washer model numbers are structured so the first 3 digits identify who built the washer for Kenmore, and the remaining digits narrow it down to the exact design and variation. For your Kenmore washer model 11020872990, the 110 prefix is the key manufacturer identifier; confirm the full model and serial from the plate as shown in the 11020872990 owner's manual.

Most Kenmore washer model numbers break down like this:

• First 3 digits (prefix): manufacturer code (who produced it for Kenmore)
• Middle digits: base design or platform (family of similar washers)
• Last digits: feature set, color, engineering revision, or production variation

This is why two Kenmore washers can look similar but still use different parts like a washer inlet valve 285805 or washer drain pump WP3363394.

We use the model and serial number exactly as printed on the washer’s model and serial number plate. That plate is the best source when ordering parts or matching diagrams.

• Look for the model and serial number plate on the washer cabinet area
• Write down the full model number and serial number
• Use the full model number when searching parts lists and diagrams

The 3-digit prefix helps match your washer to the correct parts system and design style. Even small model variations can change fit and function for common repair items.

Using the complete model number prevents wrong-part returns and speeds up troubleshooting, especially for drive system and water system parts (for example, a coupling 285753A or agitator dog 80040). If you want to shop beyond the parts list for this model, search by the full model number on Sears PartsDirect.

Last updated: February 2026

The Kenmore washer model 11020872990 is a classic top-load, agitator-style washer; its exact tub capacity is listed in the product specifications section of the 11020872990 owner's manual. In practical terms, most Kenmore top-load washers of this design handle medium to large everyday loads when loaded loosely below the top of the basket.

We recommend using the basket fill level and agitation clearance as your “capacity” guide; this protects the drive system, clutch, and gear case.

• Load items loosely, not packed down
• Keep laundry below the top row of holes in the basket
• Leave space for the agitator to move items (do not wrap items around it)
• Match water level to the load size
• For bulky items (blankets, jackets), wash one or two at a time and balance the load

Overloading often shows up as poor cleaning, slow spin, or banging during spin. If the washer struggles to agitate or spin, these parts are commonly involved:

Using the right load size helps your Kenmore 11020872990 wash more evenly, reduces vibration, and prevents premature wear on the drive components and suspension.

If you want the exact capacity number for your records, we recommend checking the specifications section in the 11020872990 owner's manual or searching the model on Sears PartsDirect.

Last updated: February 2026

To reset your Kenmore 11020872990 washer, we use a simple stop and restart: push the Cycle Selector (Timer) knob in to stop the washer, then pull the knob out to restart. This clears many “stuck cycle” situations without replacing parts.

• Turn the Cycle Selector (Timer) knob to OFF if your dial has an OFF position.
• Push the Cycle Selector (Timer) knob in to stop the washer.
• Wait 30 seconds.
• Select a new cycle.
• Pull the knob out to restart.
• If the washer was mid-cycle, let it run 1 to 2 minutes to confirm agitation or drain starts.

These checks fix the most common “no start” or “won’t advance” complaints on this style of Kenmore top-load washer.

• Confirm the outlet has power (try a lamp or small appliance).
• Make sure the lid is fully closed (a lid switch issue can mimic a reset problem).
• If the washer is full of water and will not drain, check for a clog or a weak pump; the washer drain pump WP3363394 is a common fix when the motor runs but water does not move.
• If the motor runs but the washer will not agitate or spin, inspect the coupling 285753A (a worn motor coupling can stop the drive system).
• If agitation is weak or the top agitator “ratchets,” replace the agitator dog 80040.

This model uses a mechanical timer and controls, so “resetting” is usually the same as stopping the timer and restarting it. It also lets you change certain settings during a cycle.

A proper reset helps you avoid unnecessary part replacement and quickly separates a simple control issue from a real failure (drain, drive, or agitation). For model-specific operating details and control positions, use the 11020872990 owner's manual.

You can order replacement parts for your Kenmore 11020872990 from the parts list for this model, or search by model number on Sears PartsDirect.

Last updated: February 2026