Kenmore Elite 66513969K017 undercounter dishwasher Parts

For Kenmore Elite dishwasher model 66513969K017, the most reliable “hard reset” is to reset the control by canceling the current cycle: open the door, then press CANCEL/DRAIN twice, and close the door to let it drain and clear the control so you can start a fresh cycle. See the steps in the 66513969K017 owner's manual.

Hard reset steps (control reset)

• Open the door slightly to pause the cycle; wait for spraying to stop.
• Open the door fully.
• Press CANCEL/DRAIN once.
• Press CANCEL/DRAIN a second time (this resets the control).
• Close the door within about 3 seconds so the dishwasher can run the drain.
• After the drain finishes, select your new cycle and press START/RESUME.

If it still will not start after the reset

These quick checks solve most “won’t start” complaints after a reset:

• Make sure Control Lock is off (press and hold CONTROL LOCK for 3 seconds).
• Close the door firmly; if the door is opened, press START/RESUME again to resume.
• If you set Delay Hours, press START/RESUME after closing the door to begin the countdown.
• Restore power at the breaker for 1 minute, then try a normal cycle.

What each reset method does

Method	What it clears	When to use it
CANCEL/DRAIN twice	Cycle and control state	Stuck cycle, wrong cycle selected, needs a fresh start
Breaker off 1 minute	Control power state	Unresponsive keypad, odd behavior after a power flicker
Control Lock toggle	Button lockout	Buttons do not respond and “Lock On” is lit

Why it matters

A true control reset stops the current wash action, drains standing water, and returns the dishwasher to a ready state. That prevents restarting a cycle mid-stream, which can lead to poor cleaning or detergent not dispensing correctly.

Last updated: January 2026

Common problems on the Kenmore Elite 66513969K017 dishwasher include not starting, poor draining, detergent not dispensing, odors, noisy operation, and poor cleaning. Many issues come from loading interference, power or latch problems, hard water buildup, or a clogged filter.

Most common symptoms (and what to check first)

• Dishwasher will not run: confirm the door is fully closed and latched; if Start/Resume is blinking, close the door and press Start/Resume.
• Detergent remains in the dispenser: make sure large items (cookie sheets, cutting boards, big containers) are not blocking the dispenser door.
• Not draining: check for kinks in the drain hose and clear food obstructions in the drain path or disposer connection.
• Hard water residue or cloudy glassware: use rinse aid, run a monthly dishwasher cleaner, and clean the filter regularly.
• Odors: clean the filter and run a rinse cycle between full loads if the dishwasher is not used daily.
• Suds/foam in the tub: only use automatic dishwasher detergent; hand soap or laundry detergent can cause foaming and cycle problems.

Parts that commonly relate to these problems

If the checks above do not resolve the symptom, these model-compatible parts are often involved:

Symptom	Common part to inspect	What it affects
Not draining, water left in tub	Dishwasher drain pump WPW10348269	Pumps water out through the drain hose
Poor cleaning, debris left behind	Dishwasher filter W10872845	Keeps soil from recirculating onto dishes
Not filling or fills slowly	Dishwasher water inlet valve W11175771	Controls water entering the dishwasher

Why it matters

Catching the root cause early helps prevent repeat cycle failures (like detergent not dissolving or standing water), reduces odor and mineral buildup, and protects key components such as the pump, motor, and heater.

Where we recommend confirming model-specific steps

Use the 66513969K017 owner's manual for the exact cycle behavior, indicator light meanings, and the cleaning steps for the ULTRA WASH HE filtration system.

Last updated: January 2026

To add rinse aid in your Kenmore Elite dishwasher model 66513969K017, open the door and fill the rinse aid dispenser with liquid rinse aid until the indicator reads FULL, then lock the cap back in place. Rinse aid improves drying and helps reduce spots and streaks.

Steps to fill the rinse aid dispenser

1. Open the dishwasher door fully (the fill indicator reads correctly only when the door is completely open).
2. Locate the rinse aid dispenser cap on the inside of the door.
3. Turn the cap/knob to REFILL and remove it.
4. Pour liquid rinse aid into the opening until the indicator points to FULL (do not overfill).
5. Wipe up any spilled rinse aid right away (spills can cause excessive suds).
6. Reinstall the cap and turn it to LOCK.

Adjusting the rinse aid setting (spotting vs. foam)

Your dispenser is adjustable; the factory setting is typically 2 and works well for most homes.

• If you have hard water and see white spots or calcium buildup, increase the setting.
• If you see foam or excess suds, lower the setting.
• To change it: remove the cap (REFILL), turn the arrow inside the dispenser to the desired number, then reinstall and LOCK.

What you notice	What to change	Why
Spots or streaks on glasses	Increase setting	Helps water sheet off during drying
Foam/excess suds	Decrease setting	Too much rinse aid can contribute to foaming
Poor drying	Confirm rinse aid is filled	Rinse aid improves drying performance

Why it matters

Rinse aid helps water drain off dishes after the final rinse, which improves drying and reduces water droplets that dry into spots. It is especially helpful with hard water.

Reference

For dispenser location, fill steps, and setting adjustment details, use the 66513969K017 owner's manual.

Last updated: January 2026

On Kenmore Elite model 66513969K017, the F4E1 code indicates a wash motor (circulation pump motor) problem, meaning the dishwasher is not able to circulate water correctly for washing. The most common fix is diagnosing the wash motor circuit and replacing the failed motor/pump assembly if it is not running.

What to check first (quick triage)

• Reset power: turn the breaker off for 1 minute, then back on.
• Confirm the door is fully closed and latched.
• Start a cycle and listen: you should hear the unit fill, then the wash motor should run.
• Check that the water supply valve is turned on.
• If the dishwasher fills but you hear only a hum or silence during wash, focus on the wash motor and its wiring.

How we recommend diagnosing F4E1

Use the steps and error-code guidance in the 66513969K017 owner’s manual to confirm what the display is reporting and what the control expects during the wash portion of the cycle.

1. Verify fill vs. wash: If it fills and then stops, the circulation system is the likely issue.
2. Inspect wiring connections: Look for loose plugs or damaged wires at the motor and control.
3. Check for a jam: Debris in the sump area can prevent the impeller from turning.
4. Test electrically (if you’re comfortable): Use a meter to check for power to the motor during the wash step.

Parts that are commonly involved

If the diagnosis points to a failed circulation system, these parts are often checked or replaced:

Symptom	Most likely area	Example part on this model page
Fills, then no washing action	Wash motor/pump assembly	Dishwasher pump and motor assembly WPW10328226
Poor cleaning, intermittent wash	Spray and filtration restrictions	Dishwasher filter W10872845
Drains but won’t wash	Sump obstruction or circulation issue	Sump W10168822

Why it matters

When the wash motor cannot circulate water, detergent cannot be distributed and spray arms cannot clean effectively. Continuing to run cycles with a circulation fault typically results in dirty dishes and repeated “service required” behavior.

Last updated: January 2026