Kenmore 79096213400 electric range Parts

To reset a Kenmore electric range model 79096213400, turn the range off, then restore power by unplugging it (or switching the circuit breaker off) for about 1 minute and turning power back on. After power returns, reset the clock and any oven settings using the 79096213400 owner's manual.

• Turn all surface element knobs to OFF.
• If the oven is running, press Cancel/Off (if your control has it).
• Unplug the range, or switch the range breaker OFF.
• Wait 60 seconds.
• Restore power.
• Set the time of day; after a power interruption the display commonly flashes 12:00.

Your manual warns not to operate the range during a power failure; if power fails, turn the range off. When power resumes, the range can begin operating again if it was left on, so we always recommend confirming all controls are off, then resetting the clock and oven function. Use the 79096213400 owner's manual for the exact clock-setting steps.

A reset clears many temporary control glitches, but it will not fix a failed heating circuit or a stuck indicator.

• If a surface element will not heat, check the element and the control switch.
• If the hot surface light stays on, a surface element control switch can stick.
• If the oven will not bake or broil, inspect the heating element(s) and wiring.
• If the display shows an error code, look it up and follow the recommended checks.

A proper power reset is the fastest safe way to clear a locked-up electronic oven control after a power interruption, and resetting the clock restores normal oven functions that depend on the time-of-day setting.

Last updated: January 2026

On the Kenmore electric range model 79096213400, the model and serial number are printed on an identification plate located on the right side of the oven front frame, inside the storage drawer or warmer drawer compartment. Use the number exactly as shown when ordering parts or checking wiring diagrams in the 79096213400 owner's manual.

• Turn the range off and let it cool completely.
• Pull the storage drawer (or warmer drawer, if your model has one) fully open.
• Look at the right side of the oven front frame (the vertical frame area behind the drawer opening).
• Find the sticker or metal plate labeled Model No. and Serial No.
• Write both down; the serial number helps confirm production details for correct part fit.

Most Kenmore ranges use a small sticker or plate with fields similar to the ones below.

We use the model number to match the correct Kenmore electric range parts (like a bake element, surface element control switch, or oven light bulb) and to ensure diagrams and troubleshooting steps match your exact configuration.

• Copy the model number exactly, including all digits.
• If the label is hard to read, take a clear photo and zoom in.
• If you are troubleshooting a display fault, match the code style to the correct guide; start with Kenmore 790 self-cleaning range error codes.

Last updated: January 2026

On the Kenmore electric range model 79096213400, an F3 error typically indicates the oven control is sensing a problem with oven temperature sensing, most often the temperature probe/sensor circuit (failed sensor, loose connection, or damaged wiring). Use the steps below to pinpoint whether the issue is the probe, wiring, or control.

• Press STOP/CLEAR once to clear the code; if it returns quickly, treat it as an active fault.
• Turn power off at the breaker for 1 minute, then restore power and retest.
• If the code appears during preheat, note whether the oven heats at all or stops heating.
• If the code appears after the oven is already hot, let the oven cool fully and retry.
• Review the model-specific control and troubleshooting notes in the 79096213400 owner's manual.

In most Kenmore ranges, F3-family codes point to the oven temperature sensor circuit. Here is how we interpret the most common scenarios:

If your troubleshooting points to a failed temperature probe, the part is often listed as an oven sensor or probe for this model. For this model page, we also commonly see heat-related symptoms tied to heating components; if the oven is not heating correctly, inspect the bake circuit and element condition.

• Check the oven temperature probe connection at the rear of the control area.
• Inspect wiring for heat damage, pinched insulation, or loose terminals.
• If the oven is not baking properly, inspect the frigidaire range bake element 316413800 for visible breaks, blisters, or burn spots.

The control uses the temperature sensor signal to regulate bake and broil safely. When the signal is out of range, the range may shut down heating or heat unpredictably, which affects cooking results and can overheat components.

Last updated: January 2026