Frigidaire MEF352BGWD electric range Parts

To clear an error code on your Frigidaire MEF352BGWD electric range, reset the control by turning the oven control to OFF and cycling power to the range. If the code returns right away (especially F1 or F3), the control is detecting a fault that needs troubleshooting.

• Turn the Temperature control knob to OFF.
• Shut off power to the range at the circuit breaker (or unplug if accessible).
• Wait 30 seconds.
• Restore power.
• Set the clock if needed, then try BAKE again.

For control and display behavior details, follow the steps in the MEF352BGWD owner's manual.

Your range’s electronic oven control monitors key circuits. If it detects a failure, it can stop operation and beep continuously; some versions show F1 or F3.

Common symptoms you may see:

• Continuous beeping with no other lights flashing
• F1 or F3 showing in the display (if your model has a display)
• Oven stops heating during a bake cycle

Use this checklist before replacing parts:

• Make sure the Temperature control knob turns smoothly and fully clicks to OFF.
• Let the oven cool if the error happened during or after self-clean.
• Check for signs of overheating or damaged wiring at the back of the range (power off first).
• If the oven will not heat, inspect the bake circuit; a failed element can contribute to heating problems.

If you’re diagnosing a no-heat condition, the oven wont heat troubleshooting electric range problems video walks through the most common causes.

Clearing the code gets you back to cooking quickly when the issue is a temporary control glitch or power interruption. If the code returns immediately, the range is protecting you by stopping operation until the underlying fault is corrected.

Last updated: January 2026

Most Frigidaire gas ranges last 13 to 15 years with normal household use and basic maintenance. Even though model MEF352BGWD is an electric range, the same lifespan range is a solid expectation for a well-cared-for range; consistent cleaning and prompt repairs help it reach the high end.

• Cooking frequency and high-heat use (daily cooking shortens life faster than occasional use)
• Keeping spills from baking onto elements and wiring
• Avoiding moisture around controls (excess water can damage control areas)
• Fixing heating problems early instead of continuing to run the oven
• Using correctly sized cookware on surface elements

For model-specific care and cleaning practices, follow the MEF352BGWD owner's manual.

If performance drops, replacing a worn part is often cheaper than replacing the whole range. Common examples on MEF352BGWD include:

• Bake element 316075103 if the oven won’t heat or heats unevenly
• Surface element control switch issues when a burner won’t regulate temperature
• Oven light parts when the light stops working (bulb or socket)

Knowing the typical lifespan helps you decide when a repair is worth it. If your range is within the 13 to 15-year window, replacing a failed heating part (like a bake element) often restores normal cooking performance quickly.

Last updated: January 2026

On the Frigidaire MEF352BGWD electric range, the model number is printed on the serial plate under the lift-up cooktop (on coil-cooktop models). Lift the cooktop and read the model and serial information directly from that plate.

For MEF352BGWD ranges with coil surface elements, the serial plate is located under the cooktop.

• Turn all surface elements off and make sure the cooktop is cool
• Lift up the cooktop (it hinges up on most coil-element ranges)
• Look for a metal or foil serial plate under the cooktop area
• Record both the model number and serial number for parts lookup
• Use the exact characters shown (letters and numbers)

The serial plate typically lists these fields:

Using the exact model number ensures you get the correct Frigidaire range parts that fit your specific configuration (surface elements, oven controls, and wiring). It also helps when referencing diagrams and troubleshooting steps in the MEF352BGWD owner’s manual.

Last updated: March 2026