Kenmore 58716142405 dishwasher Parts

Yes. We still carry replacement parts for many Kenmore dishwashers, including model 58716142405. The key is matching parts to your exact model number so the fit and connections are correct for items like door seals, drain hoses, inlet valves, and pumps; check the 58716142405 owner's manual for model-specific guidance.

Use your full model number (58716142405) and confirm the symptom you are fixing before you buy.

• Match the model number on the rating label, not just “Kenmore dishwasher”
• Compare the part description to your issue (leak, no drain, no fill, poor wash)
• Check whether the part is a seal/gasket vs. a hose or pump (similar symptoms, different fixes)
• Inspect for visible wear: cracks, swelling, mineral buildup, loose clamps
• If you are installing the dishwasher, verify utility requirements and routing to avoid kinks

These are examples of parts we commonly see replaced for leaks and draining issues on this model.

Kenmore dishwashers are built with model-specific mounting points, hose routing, and electrical connections. Ordering by model number helps you avoid returns and prevents installation issues like kinked hoses, poor filling from low water pressure, or improper leveling that can affect performance.

From the installation guidance for this platform:

• Use a 15 to 20 amp, grounded, 120V AC electrical supply
• Connect to a hot water supply with enough pressure for an adequate fill
• Flush the water line before final connection to help prevent screen clogging
• Avoid kinked water or drain hoses
• The dishwasher performs best when properly leveled

For error displays or blinking-light diagnostics, use our Kenmore 665 model dishwasher error codes reference to narrow the failure to a specific circuit or component.

Last updated: February 2026

Your Kenmore dishwasher’s model number is printed on the model and serial number label, typically found around the door opening (inner door frame, top edge of the door, or along the tub opening). For this parts page, the model is 58716142405; confirm your label matches before ordering parts or troubleshooting. See the 58716142405 owner's manual.

Check these common label locations first:

• Inner door frame (left or right side when the door is open)
• Top edge of the door
• Tub opening or tub wall near the door
• Behind the lower kickplate area (less common, but possible)
• Paperwork that came with the dishwasher (Use and Care Guide)

Record both the model and serial number exactly as shown; Kenmore model numbers often share prefixes, and one digit can change the correct door seal, drain hose, or control parts.

• Match every digit of the model number (no missing zeros)
• Use the full model number, not just the 587. prefix
• If the label is worn, take a clear photo with the door open and good lighting
• Confirm the part category you need (for example: door seal vs. splash shield)

Kenmore dishwashers in the 587 series can look similar, but internal components like the water inlet valve, drain pump, and door sealing parts vary by exact model. Using the correct model number keeps repairs accurate and prevents leaks, no-drain issues, and fit problems.

Last updated: February 2026

Repairing a Kenmore dishwasher like model 58716142405 is worth it when the fix is a leak, drain issue, or wear item and the total repair cost stays well below the price of a replacement. It is less worth it when multiple major components (pump motor, tub, control) are failing at the same time.

Use these checkpoints before you buy parts or schedule service:

• If it is under ~10 years old, repairs usually make sense.
• If the repair is under ~50% of replacement cost, repairing is usually the better value.
• If the problem is a leak or poor draining, it is often a single-part fix.
• If the tub is damaged or multiple big parts are bad, replacement is usually the smarter spend.
• If you are still within the 1-year warranty window, repair is the clear choice (the manual describes the warranty terms).

For model-specific operating and care guidance that prevents repeat failures, use the 58716142405 owner’s manual.

These are typical repairs that restore performance without major teardown:

• Replace a leaking lower door seal: gasket 809006501
• Fix a drain problem caused by a split or kinked drain line: hose 807117001
• Restore drying and heating performance by addressing heater-related issues (after confirming safe power is disconnected)
• Correct overfilling symptoms by cleaning the overfill protector (float) so it moves freely

If you are seeing any of the patterns below, replacement tends to be more cost-effective:

A dishwasher repair is “worth it” when it restores reliable washing and drying without creating a cycle of repeat service. Regular care also helps; the manual notes the interior is generally self-cleaning with normal use, and it gives cleaning guidance for the tub gasket area and overfill protector.

Last updated: February 2026