Kenmore 79572595712 bottom-mount refrigerator Parts

Kenmore bottom-mount refrigerator model 79572595712 is a full-size, 33-inch class refrigerator; most units in this model family are about 33 inches wide, 31 to 34 inches deep, and 67 to 70 inches tall. For the exact cabinet and door-swing dimensions, use the 79572595712 owner's manual.

How to confirm the exact dimensions (fast and accurate)

• Measure the cabinet width at the widest point (not including handles unless you need overall clearance).
• Measure depth two ways: cabinet-only and to the front of the doors/handles.
• Measure height from floor to the top of the hinge cover.
• Check door-swing clearance; you need extra space to fully open doors and remove bins.
• Compare your measurements to the dimension diagram in the 79572595712 owner's manual.

Space and clearance guidelines for this model type

The manual calls out key installation clearances that affect fit and performance.

Location	Typical minimum clearance	Why it matters
In front (door opening)	24 inches	Lets doors open fully and bins slide out
Behind (to wall)	2 inches	Helps airflow and reduces energy use
Water supply pressure (if icemaker is used)	20 to 120 psi	Supports proper ice maker fill

Why it matters

Getting the size right prevents door interference, poor airflow, and installation headaches. It also helps you plan for water line routing for the ice maker and ensures you can remove shelves, drawers, and storage bins without moving the refrigerator.

Last updated: January 2026

Common problems we see on Kenmore Elite refrigerators (including the Kenmore 79572595712 bottom-mount) are not cooling or running warm, ice maker or water dispenser issues, frost/ice buildup, and unusual noises. Many causes are maintenance-related (airflow, door sealing, filters), while others point to a fan, valve, or control problem; use the 79572595712 owner's manual troubleshooting section to narrow it down.

Most common symptoms and what usually causes them

• Not cooling or too warm: blocked air vents, frequent door openings, unit in defrost cycle, or demo mode; it can also be a fan or sealed-system issue.
• Ice maker not making enough ice: freezer temperature too warm, doors not closing fully, or heavy door openings.
• Slow water dispensing: a clogged or exhausted water filter.
• Frost/ice buildup: door not sealing, doors left open, or airflow blocked by food packages.
• Buzzing/clicking/humming: condenser fan, evaporator fan, or compressor-related noise.

Quick checks we recommend first (fast, no parts)

1. Confirm the refrigerator is not in demo mode and cooling is enabled.
2. Give a new install or recent move up to 24 hours to stabilize temperatures.
3. Make sure air vents are not blocked by containers or bags.
4. Reduce door-open time; warm, humid air quickly raises temps and frost.
5. Verify the room temperature is within normal operating range (most units should be used around 55°F to 110°F).

Parts that commonly solve these issues on model 79572595712

Symptom	Common part to check	What it affects
Slow water flow	Genuine Kenmore refrigerator water filter 9980 AGF80300805	Water taste, flow rate, dispenser performance
Ice maker not filling	Lg refrigerator water inlet valve AJU72992601	Water supply to ice maker and dispenser
Warm temps, poor airflow	Refrigerator evaporator fan motor EAU63923603	Circulates cold air through compartments
Odors in fresh food section	Lg refrigerator air filter ADQ73214408	Reduces food odors and stale air

Why it matters

Warm temperatures, restricted airflow, and a weak door seal can snowball into food spoilage, heavy frost, and poor ice production. Starting with airflow, door closure, and filter condition prevents unnecessary part replacement.

Last updated: January 2026

On a Kenmore bottom-mount refrigerator like model 79572595712, the “bottom part” is most often the machine compartment (also called the lower rear compartment). It houses key cooling components such as the compressor, condenser area, and related airflow parts.

What you will typically find in the bottom area

Depending on the exact layout, the lower section can include:

• Compressor (the pump that circulates refrigerant)
• Condenser area (where heat is released)
• Condenser fan motor (moves air across the condenser area)
• Drain pan (catches defrost water so it can evaporate)
• Vents and a protective cover or grille

For safety, we follow the guidance in the 79572595712 owner's manual and keep hands and objects away from the bottom vents and underside while the refrigerator is plugged in.

Common names customers use (and what they mean)

What people call it	What it usually refers to	Where it is
Bottom grille / toe grille	Front lower cover or vented panel	Front, near the floor
Back bottom panel	Rear access cover for cooling components	Rear, near the floor
Machine compartment	The space that contains the cooling system parts	Lower rear
Drain pan area	Pan under the cabinet that collects defrost water	Bottom, underneath

Why it matters

Knowing the correct name helps you find the right instructions and parts. For example, if you are troubleshooting odors, airflow, or heat around the cabinet, the machine compartment and its vents are often involved.

Helpful related part examples for this model

If your question is tied to performance or odors, these model-matched parts are commonly involved:

• Refrigerator compressor assembly TCA38091801 (cooling system pump)
• Refrigerator condenser fan motor EAU63923602 (moves air through the condenser area)
• Lg refrigerator air filter ADQ73214408 (helps reduce odors inside the fresh food section)

Last updated: January 2026