Kenmore 10651752711 side-by-side refrigerator Parts

Kenmore model numbers tell you who built the appliance and which design family it belongs to; for Kenmore refrigerator model 10651752711, the 106 prefix identifies the manufacturer (Whirlpool-built), and the remaining digits narrow down the exact side-by-side configuration so we can match the correct parts and manual.

Check these common locations first:

• Inside the fresh food compartment on a side wall near the top shelf
• On the ceiling of the refrigerator compartment near the light
• On the inside edge of the refrigerator door (hinge side)
• Behind the toe grille or near the lower front frame
• On the back of the cabinet (less convenient, but common)

For diagrams and model coverage details, use the 10651752711 owner's manual.

Most Kenmore model numbers follow a predictable pattern:

• Prefix (first 3 digits): identifies the original manufacturer
• Middle digits: identify the product platform and feature set
• Suffix digits/characters: identify color, revision, or production variation

Using the full model number prevents mismatches because Kenmore used multiple manufacturers and platforms. Even small digit changes can affect fit and wiring for items like an ice maker, water inlet valve, or dispenser components.

If you are troubleshooting a display or fault code on a Kenmore 106-series refrigerator, our Kenmore 106 model refrigerator error codes guide helps you connect the code to the right checks and parts.

Last updated: February 2026

For Kenmore side-by-side refrigerators like model 10651752711, the most common overall cabinet width is about 36 inches. In the 106.5175* family, our installation specs also call out a 36-inch minimum cabinet cutout width, which is the key number to plan around for fit. See the 10651752711 owner's manual for your exact configuration.

When customers ask about width, it can mean a few different things. We recommend checking all three so the refrigerator fits and the doors open properly.

• Cabinet width: the refrigerator body, not counting door swing
• Cutout width: the opening between cabinets (often the planning number)
• Door swing clearance: extra space needed so doors open fully
• Handle depth/overhang: handles can change how tight a fit feels
• Leveling and alignment: a tilted cabinet can change door clearance

The Use and Care Guide for the 106.5175* series lists a normal minimum cabinet cutout width of 36 inches (91.44 cm) for installation planning.

A side-by-side refrigerator that is even slightly too wide for the opening can bind during installation, reduce airflow, and limit door swing. Planning around the 36-inch cutout plus required clearances helps prevent cooling and access problems.

• Measure the opening at top, middle, and bottom (floors and cabinets can be out of square)
• Confirm you have 1/2 inch clearance on both sides and at the top
• Confirm 2 inches behind for airflow and water line routing (if equipped)
• Allow extra space near walls so doors can open fully
• Recheck after leveling the refrigerator

Last updated: February 2026

The most common problems we see on Kenmore refrigerators like model 10651752711 are cooling issues, water or ice dispenser troubles, leaks, and unusual noises. These typically trace back to airflow restrictions (dirty coils or iced-up evaporator), water supply or filter problems, or worn components like fans and valves.

• Not cooling or weak cooling: dirty condenser coils, evaporator fan not running, frost buildup from a defrost problem
• Freezer cold but fresh food warm: evaporator fan issue, blocked air vents, iced evaporator
• Water dispenser slow or dripping: clogged or misinstalled filter, air in water lines after filter change, low water pressure
• Ice maker not making ice: water supply issue, inlet valve problem, ice maker assembly failure
• Noises (buzzing, rattling, clicking): fan blade hitting ice, failing fan motor, normal cycling sounds becoming louder

1. Set temps to typical targets: 0°F freezer, 37°F refrigerator.
2. Confirm doors seal fully and nothing blocks interior air vents.
3. Clean condenser coils and verify the unit has breathing room.
4. If dispenser drips, hold the glass under the spout 2 to 3 seconds after releasing the lever.
5. If a filter was just installed, flush water to purge air from the lines (steps vary by model; see the 10651752711 owner's manual).

Cooling and dispenser problems usually start small (restricted airflow or low water flow) but can lead to spoiled food, ice buildup, and extra strain on the compressor. Catching the root cause early helps keep temperatures stable and prevents repeat failures.

Last updated: February 2026

A Kenmore 10651752711 side-by-side refrigerator usually stops cooling because it is not getting power, the temperature controls are set incorrectly, airflow is blocked at the vents, or the doors are not sealing. After any change, allow up to 24 hours for temperatures to stabilize (per the 10651752711 owner's manual).

• Confirm the cord is plugged into a grounded 3-prong outlet (no adapter or extension cord).
• Check the outlet has power (test with a lamp); reset the breaker or replace a blown fuse.
• Verify the refrigerator and freezer controls are not set too warm; small adjustments matter.
• Make sure air vents are not blocked by food packages.
• Check both doors close fully and the gaskets seal all the way around.
• If it was just installed or moved, give it a full 24 hours to cool.

If airflow or cooling components are failing, these model-matched parts are commonly involved:

• Refrigerator evaporator fan motor WP2315549 (moves cold air through the compartments)
• Refrigerator evaporator fan blade WP2169142 (damaged blades reduce airflow)
• Compressor W10233960 (drives the sealed cooling system)

A “no-cool” condition can spoil food quickly, and running the controls at the coldest setting will not cool faster. Correct airflow, door sealing, and proper control settings restore normal operation more reliably.

Last updated: February 2026

The cubic-foot capacity for Kenmore side-by-side refrigerator model 10651752711 is listed in the product specifications section of the Use & Care Guide for the 106.5175* model family. Use the 10651752711 owner's manual to find the exact total capacity for your specific version.

In the manual, look for a section labeled “Product specifications,” “Capacity,” or similar.

• Check the Specifications or Features pages in the Use & Care Guide
• Look for total capacity (cu. ft.) and, if shown, refrigerator and freezer capacities
• Match your full model number 10651752711 to the covered model family (106.5175*)
• Use the rating label inside the fresh food compartment to confirm the model and series

Most Kenmore 106-series side-by-side refrigerators are in a mid-size range; your exact number depends on the specific configuration.

Even when two refrigerators have the same cubic feet, storage can feel smaller if you have a large ice bin, bulky door bins, or added accessories.

• Ice maker and ice container reduce freezer storage
• Door bins trade depth for easy access
• Air channels and vents must stay clear for proper cooling

Last updated: February 2026

Most Kenmore refrigerators average 10 to 15 years of service life. For a Kenmore side-by-side like model 10651752711, regular maintenance (airflow, clean seals, and timely part replacement) is what most often determines whether it lands closer to 10 years or pushes beyond 15.

• 10 to 15 years is the normal expectation for a household refrigerator.
• Units that get routine cleaning and stable temperatures often run 15 to 20 years.
• Heavy use, poor ventilation, and neglected cleaning commonly shorten life.

We recommend focusing on these high-impact items:

• Clean condenser coils (dust buildup makes the compressor work harder).
• Confirm doors seal tightly (warm air leaks cause long run times and frost).
• Keep vents clear inside both compartments for proper airflow.
• Replace water filters on schedule to protect the water system.
• Fix small issues early (noisy fan, slow ice production, leaks).

When these parts start failing, the refrigerator often runs warmer, louder, or longer than normal:

• Evaporator fan system (air circulation): refrigerator evaporator fan motor WP2315549
• Water and ice supply control: refrigerator water inlet valve WPW10179146
• Ice production: refrigerator ice maker assembly WPW10300022

A refrigerator that runs constantly because of dirty coils, restricted airflow, or a weak door seal can overwork the sealed system (compressor and refrigerant loop). Keeping the unit efficient is the most reliable way to maximize lifespan.

For model-specific care and cleaning intervals, follow the 10651752711 use & care guide.

Last updated: February 2026

On Kenmore side-by-side refrigerator model 10651752711, the model and serial number are printed on the appliance identification tag, typically inside the fresh food (refrigerator) compartment around the door opening. We use that tag information to match the correct parts and the correct Use and Care information.

• Open the fresh food door and look along the inside cabinet walls near the front
• Check the door jamb area (the frame the door seals against)
• Look near the top side wall or upper ceiling area inside the refrigerator section
• If you do not see it immediately, remove items from the top shelves so you can scan the liner edges

The tag usually lists multiple identifiers. Record these exactly:

• Model number (for this page: 10651752711)
• Serial number (needed for some production changes)
• Electrical ratings (helpful for service diagnostics)

Kenmore model numbers can look similar across different refrigerator families. Using the exact model and serial from the tag prevents ordering the wrong ice maker, water inlet valve, door bin, or dispenser parts.

Use the model number to reference the correct operating and identification details in the 10651752711 owner's manual.

Last updated: February 2026