Error Codes
How do I reset my Kenmore electric range?
For a Kenmore electric range model 6289468894, the most reliable reset is a full power reset: turn the range off, cut power at the breaker for 1 to 5 minutes, then restore power and set the clock. This clears many control glitches and false error beeps.
Quick reset steps (power reset)
- Turn all surface burners and the oven off.
- Switch the range breaker OFF (or unplug the cord if it is accessible).
- Wait at least 1 minute; use 5 minutes if the display was frozen or showing an error.
- Restore power.
- Set the clock and test Bake and a surface element.
If the display still shows an error code
A reset may clear a temporary fault, but repeated codes usually point to a failed component (often a keypad/control issue, sensor circuit, or heating circuit).
- Write down the exact code and when it appears (at power-up, during preheat, during self-clean).
- Try the power reset again after 5 minutes.
- If the code returns, use our error-code reference to match the symptom to the likely circuit.
Helpful reference: Kenmore glass touch module electric range error codes
When a “reset” is really a heating or burner problem
If the oven or a surface burner still will not heat after a reset, the issue is usually not software. Common causes include a failed heating element, a bad burner switch, or a loose/burned wire connection.
- For no-bake or weak baking: inspect the bake element for blisters, cracks, or holes.
- For one surface burner not heating: swap the element to another position (if it is a plug-in style) to isolate the element vs. receptacle/switch.
- For intermittent power or dead range: check the power cord connection and terminal block for heat damage.
Parts that commonly relate to these symptoms on this model include:
| Symptom | Common part to check | What it affects |
|---|---|---|
| Oven will not bake | Element 5303051519 | Oven bake heat |
| Surface burner not heating | Element 318372211 | Cooktop heat |
| Range dead or power cuts out | Terminal block 5304409888 | Incoming power connection |
Why it matters
Resetting by cutting power is safe and effective for clearing a stuck control or minor electronic glitch. If the problem comes back right away, focusing on the heating circuit (element, switch, wiring, terminal block) prevents repeated shutdowns and uneven cooking.
Last updated: January 2026
Where to find model number on Kenmore Electric Range?
On a Kenmore electric range like model 6289468894, the model number is printed on a rating label attached to the appliance frame. We most often see it when you open the oven door and look along the door frame (door jamb), or when you pull out the lower storage drawer and check the frame behind it.
Most common places to check
- Open the oven door; look on the left or right door frame (door jamb) for a sticker or metal tag
- Pull out the bottom storage drawer; check the frame behind the drawer opening
- Check the back panel of the range near the power cord entry area
- Look along the side frame near the front edge (visible when the door is open)
What the label looks like
The label usually includes the model number and often a serial number. It may be:
| Label type | What it looks like | Where it’s commonly found |
|---|---|---|
| Paper sticker | White or silver sticker with black text | Door jamb or behind the storage drawer |
| Metal tag | Small metal plate with stamped/printed text | Door jamb or rear panel |
Why it matters
We use the exact model number to match the correct parts and diagrams for your range. Even small differences in a Kenmore range series can change which bake element, surface element, or terminal block fits.
If you’re checking parts after you find the model number
Once you confirm the model number, match parts by the exact listing for your range, such as the element 318372211 if you are troubleshooting a surface burner that will not heat.
Last updated: January 2026
What is the average lifespan of 6289468894?
A Kenmore electric range like model 6289468894 typically lasts 13 to 15 years with normal household use and basic maintenance. If you keep the oven and cooktop components in good condition, you can often extend service life and avoid performance issues.
What affects lifespan most
- Heating load and usage: frequent high-heat baking or broiling shortens element life
- Electrical supply quality: loose connections or overheating at the power connection can cause failures
- Cleaning habits: spills left to bake on can damage finishes and stress components
- Door wear: a sagging door can affect baking results and heat retention
- Timely part replacement: replacing worn parts early prevents secondary damage
Common wear items (and what they do)
| Part area | What typically wears | What you may notice |
|---|---|---|
| Cooktop heating | Surface element | Burner not heating, heating unevenly |
| Oven heating | Bake/broil element | Slow preheat, weak broil, uneven baking |
| Power connection | Terminal block | Burning smell, intermittent power, melted wiring |
| Door operation | Door hinge | Door won’t close tightly, heat leaks |
If you are troubleshooting a power smell, heat damage, or intermittent operation, start by inspecting the power cord connection and the terminal block 5304409888.
Why it matters
Knowing the typical 13 to 15 year lifespan helps you decide whether a repair (like replacing an element, switch, or terminal block) is a smart investment versus planning for a replacement range.
Last updated: March 2026
