Kenmore 25370502411 refrigerator Parts

For Kenmore refrigerator model 25370502411, the correct water filter is the one specified for your exact model in the product literature; we recommend matching by model number first, then confirming the filter style and location in the 25370502411 owner's manual.

How to identify the right filter (fast)

• Confirm the model number on the rating label inside the fresh food section: 25370502411
• Check whether your refrigerator has:
  • An internal cartridge filter (usually in the fresh food compartment)
  • No built-in filter (uses an inline filter on the water supply line)
• Match the filter by the refrigerator’s filter housing shape and locking style (push-in, quarter-turn, etc.)
• If you have an ice maker only, verify whether filtration is handled by an inline filter instead of a cartridge
• Replace filters on schedule to protect water flow and ice quality

What we use to confirm compatibility

The most reliable match is always model number plus filter location. Use this checklist before ordering:

What you check	Where to look	What it tells you
Model number	Inside refrigerator compartment	Ensures the filter is designed for 25370502411
Filter location	Fresh food ceiling, grille, or rear wall	Cartridge vs. inline setup
Water supply setup	Behind unit at inlet connection	Whether an inline filter is used
Symptoms	Slow dispense, small cubes, odd taste	Often points to a restricted filter

Why it matters

Using the correct filter for Kenmore 25370502411 prevents leaks, poor fit, and restricted water flow that can lead to weak ice production. The installation guide also calls out proper water supply conditions (cold water line, 30 to 100 psi, and 1/4-inch OD copper tubing), which directly affects dispenser and ice maker performance. See the 25370502411 installation guide for water line requirements and connection basics.

Related help for water and ice issues

If you are troubleshooting taste, flow, or ice production after changing a filter, these guides help narrow it down:

• How to replace the water filter in a Kenmore refrigerator
• How to prevent water dispenser and ice maker problems
• Common refrigerator ice maker problems and solutions

Last updated: January 2026

On the Kenmore 25370502411 top-mount refrigerator, the upper section is the freezer compartment. It’s the coldest area of the appliance and is designed to keep foods frozen; on some setups it also supports an automatic ice maker.

What you’ll find in the upper (freezer) section

In a top-mount design like model 25370502411, the freezer is typically where you’ll see:

• Freezer shelves or door bins for frozen foods
• Cold-air circulation that helps freeze and maintain temperature
• Space for an optional automatic ice maker (if equipped)
• A freezer door that should seal tightly to prevent frost and temperature swings

For model-specific features and control guidance, use the 25370502411 owner's manual.

Freezer vs. fresh food compartment (quick comparison)

Section	Common name	Main purpose	Typical target temperature
Upper section	Freezer compartment	Long-term frozen storage	0°F
Lower section	Fresh food compartment (refrigerator)	Short-term fresh storage	34°F to 40°F (optimum about 37°F)

Why it matters

Knowing the correct name helps when you’re ordering parts, reading troubleshooting steps, or following temperature and storage recommendations. For example, the manual notes that the fresh food compartment should be kept between 34°F and 40°F, and it also gives freezer storage tips like leaving space between packages for airflow.

Helpful tips for better freezer performance

• Avoid overloading the freezer with warm food at one time; it slows freezing.
• Leave space between packages so cold air can circulate.
• Store hard-to-freeze items (like ice cream) in the freezer interior, not the door.
• Keep vents clear; blocked airflow can cause uneven temperatures.
• Level the refrigerator so doors close tightly and seal properly.

Last updated: January 2026

Kenmore top-mount refrigerator model 25370502411 measures 32 inches wide, 65-3/4 inches tall, and 26-5/8 inches deep (cabinet depth). For a true installed fit, confirm required clearances, door swing, and leveling details in the 25370502411 owner's manual.

Dimensions to plan around

Use the refrigerator’s cabinet dimensions, then add space for airflow and door clearance.

• Measure the opening width, height, and depth in at least two spots
• Allow space behind the refrigerator for airflow and the power cord
• Leave hinge-side clearance so the door opens without hitting a wall
• Account for handles if your opening depth is tight
• Plan to level the cabinet so doors close properly

Quick size reference

Measurement	25370502411 cabinet size	What to measure at home
Width	32 in.	Wall-to-wall opening width
Height	65-3/4 in.	Floor to lowest cabinet or soffit
Depth	26-5/8 in.	Back wall to front of cabinet (exclude handles unless needed)

Installation detail that affects “fit”

Proper leveling changes how the doors sit and close. Many top-mount refrigerators are set with a slight front-to-back tilt so doors close freely when opened halfway. Follow the leveling and roller adjustment steps in the 25370502411 installation guide.

Why it matters

Correct sizing and clearances prevent restricted airflow (poor cooling), doors that cannot open fully, and alignment issues that can lead to moisture, frost, or warm spots.

Last updated: January 2026