Hotpoint HPS18BTHNRWW top-mount refrigerator Parts

Yes. For Hotpoint refrigerators sold in the United States (including the Hotpoint HPS18BTHNRWW top-mount refrigerator), the Hotpoint brand is owned by GE Appliances, so Hotpoint refrigerators in this region are made under the GE Appliances organization.

What this means for parts and service

When you are shopping parts or troubleshooting, it helps to treat Hotpoint as part of the GE Appliances family for compatibility and design conventions.

• Many replacement parts are shared across Hotpoint and GE model lines
• Part numbers often follow GE-style numbering (for example, WR-prefixed part IDs)
• Repair procedures and common failure patterns are often similar across the family
• Model number matching still matters; always confirm fit by model

Parts examples for model HPS18BTHNRWW

If you are repairing your Hotpoint refrigerator, these GE-family parts are examples of what you may see listed for this model:

What you are fixing	Example part for this model	What it does
No ice production (if equipped)	G.e. refrigerator ice maker kit WR30X10093	Automates ice production in the freezer
Interior light out	G.e. appliance light bulb, 40-watt 40A15	Restores fresh food section lighting
Warm fridge or noisy fan	Refrigerator evaporator fan motor WR60X31522	Circulates cold air from the evaporator
Door not sealing well	Refrigerator door gasket (white) WR14X29359	Helps prevent warm air leaks and frost

Why it matters

Knowing Hotpoint is under GE Appliances helps you search smarter for refrigerator parts, understand why you see GE-style part IDs, and choose proven troubleshooting steps for cooling, ice maker, and door seal issues.

Last updated: February 2026

An 18 cu. ft. top-mount refrigerator like Hotpoint model HPS18BTHNRWW is typically about 65 to 68 inches tall, 28 to 30 inches wide, and 30 to 32 inches deep; exact dimensions vary by cabinet style, door design, and hinge clearance, so measure your opening before buying or moving it.

Typical dimensions you can plan around

Most 18 cu. ft. top-freezer/top-mount refrigerators fall into these common ranges:

• Height: 65 to 68 inches
• Width: 28 to 30 inches
• Depth (cabinet): 30 to 32 inches
• Depth with doors/handles: often 1 to 3 inches deeper than the cabinet
• Clearance needed: usually extra space at the sides and top for airflow

How to measure your space correctly

Use a tape measure and capture these numbers before ordering parts, replacing the refrigerator, or planning a move:

• Opening width at the front and back (some alcoves taper)
• Opening height to the lowest cabinet or trim
• Depth from the back wall to the front edge of counters
• Door swing space so doors can open fully
• Pathway clearance (doorways, hallways, turns)

Quick planning table (what to measure)

Measurement	What to include	Why it matters
Width	Wall-to-wall opening	Prevents binding and vibration noise
Height	Floor to cabinet/soffit	Avoids scraping and forced tilt
Depth	Wall to counter front	Prevents sticking out into walkways
Door swing	Space in front/side	Ensures drawers and bins can pull out

Why it matters

Even when capacity is the same (18 cu. ft.), small differences in door thickness, hinges, and handle style can change real-world fit. Getting the opening and clearance right helps prevent poor cooling from restricted airflow and reduces door-seal problems.

For related fit and performance tips, we recommend how to use your refrigerator efficiently.

Last updated: February 2026

A 17.6 cu. ft. top-mount (top-freezer) refrigerator is typically about 28 inches wide; most fall in the 27 to 30 inch range. For your Hotpoint HPS18BTHNRWW, confirm the exact exterior width by measuring the cabinet at its widest point.

Typical width you should plan for

Most 17 to 18 cu. ft. top-mount refrigerators are built on a standard-width cabinet. Use these planning numbers for a cutout or replacement comparison:

• Most common exterior width: about 28 inches
• Typical range: 27 to 30 inches
• Common “tight fit” risk: door edges and hinges can add a little at the widest point
• Best practice: measure the refrigerator, then measure the opening in 2 to 3 spots

How to measure width correctly

Measure in inches with the doors closed:

• Cabinet width: left side panel to right side panel at the widest point
• Hinge-side width: include any hinge cover that sticks out
• Door swing clearance: allow extra space so doors open fully without hitting a wall
• Ventilation clearance: leave room around the cabinet for airflow

Quick planning table

What you are measuring	What to include	Why it changes the number
Refrigerator “cabinet” width	Side panels only	Most consistent measurement
Overall installed width	Hinges, door edges, trim	Often the true widest point
Opening width	Cabinet opening at front and back	Walls can be out of square

Why it matters

If the refrigerator is even 1 inch wider than the opening, installation can fail or doors may not open fully. Accurate measuring also helps prevent airflow restrictions that can affect cooling.

If you are measuring because of cooling issues (warm fridge, frost buildup), checking the evaporator fan system is a common next step; the model uses parts such as the refrigerator evaporator fan motor WR60X31522.

Last updated: February 2026