Owner’s manual
View engine
How do I contact Craftsman parts?
For Craftsman walk-behind mower model 917370413, we recommend using the parts list and diagrams to identify the exact replacement part, then ordering it through Sears PartsDirect. If you need help confirming fit or choosing the right part, contact Sears PartsDirect support with your model number and part details.
What to have ready
- Model number: 917370413
- Part name and where it installs (deck, handle, rear discharge area)
- Symptoms (won’t start, won’t move, poor cut quality, excessive vibration)
- Whether you need a replacement part or help identifying the correct part
- Any photos of the worn or broken part (helpful for identification)
Common parts customers ask about for this model
If you already know what you need, we can often help you match the part faster by using the part ID.
| Part type | Example part for model 917370413 | What it affects |
|---|---|---|
| Blade | Lawn mower 22-inch deck 3-in-1 blade 532421825 | Cut quality, mulching, bagging |
| Drive system | Lawn mower drive cable 586638001 | Self-propel function |
| Rear discharge | Lawn mower clipping deflector 532426129 | Discharge direction and safety |
| Wheels | Lawn mower wheel and tire, 8 x 1.75-in 583719501 | Traction and height consistency |
Why it matters
Using the correct model number and part ID prevents ordering the wrong Craftsman lawn mower part and helps avoid fitment issues, repeat repairs, and downtime during mowing season.
For diagrams, maintenance guidance, and part identification tips, use the 917370413 owner's manual.
Last updated: March 2026
What are the most common lawn mower repairs?
The most common repairs on a Craftsman walk-behind mower like model 917370413 are fuel-system cleanups, ignition tune-ups, and cutting or drive-system fixes. Most problems trace back to old fuel, restricted airflow, a worn spark plug, or a dull/bent blade; all are straightforward to diagnose.
Most common repairs (and what you usually do)
- Won’t start or starts then dies: drain old gas, clean carburetor bowl/jets, replace fuel line or filter if equipped
- Runs rough or surges: clean carburetor, check for air leaks, replace dirty air filter
- Hard to pull starter rope: check for a stuck blade or debris under the deck; inspect recoil starter
- Poor cut quality or vibration: sharpen/replace blade, clean deck, check blade mounting hardware
- Self-propel won’t move or slips: adjust/replace drive cable, inspect drive wheels and transmission
- Clippings blow out or won’t bag/mulch well: clear chute, replace damaged deflector/door, clean buildup
Quick troubleshooting checklist (fastest wins first)
- Use fresh fuel (gas can go stale quickly in storage).
- Check the spark plug condition and gap; replace if fouled.
- Inspect and clean/replace the air filter.
- Tip the mower safely and clear packed grass from the deck.
- Inspect the blade for dullness, bends, or heavy nicks.
Parts that commonly get replaced on this model
| Symptom | Likely part area | Example part for 917370413 |
|---|---|---|
| Uneven cut, tearing grass, vibration | Blade and blade hardware | Husqvarna lawn mower 22-inch deck 3-in-1 blade 532421825 |
| Self-propel not engaging | Drive cable | Lawn mower drive cable 586638001 |
| Engine won’t shut off or safety control issues | Zone control cable | Lawn mower control cable 587326601 |
| Discharge control problems | Chute/door/deflector | Lawn mower clipping deflector 532426129 |
Why it matters
Catching these issues early prevents bigger failures like a damaged crankshaft from blade impacts, premature transmission wear from a slipping drive, and hard starting from varnished fuel in the carburetor.
Specs and procedures to confirm
For model-specific maintenance intervals, blade orientation, and control-cable routing, follow the 917370413 owner’s manual.
Last updated: February 2026
What brand engine does Craftsman use?
Craftsman walk-behind mowers like model 917370413 are commonly built with engines sourced from major small-engine makers such as Briggs & Stratton, Kohler, and Kawasaki. The exact engine brand on your mower is confirmed by the engine label and the engine model number listed in the 917370413 owner's manual.
How to identify the engine brand on your 917370413
Check these spots on the mower and engine:
- Engine shroud/cover decal: usually shows the brand name prominently.
- Engine model-type-code tag (often stamped or on a sticker): used to match tune-up parts.
- Valve cover or recoil starter housing: sometimes includes the engine family name.
- Mower data plate (deck or rear frame area): may list engine details.
- Owner's manual engine section: often references the engine model format.
What you will typically see (and what it means)
Different engine brands use different ID formats; once you have the engine model number, you can match the correct spark plug, air filter, and carburetor parts.
| What you find on the engine | What it tells you | What to do next |
|---|---|---|
| Brand name (Briggs & Stratton, Kohler, Kawasaki) | Engine manufacturer | Use that brand for service info and tune-up specs |
| Engine model/type/code | Exact engine version | Match maintenance parts by the full code |
| Craftsman mower model 917370413 | Mower platform | Use it to match deck, blade, wheels, and controls |
Why it matters
Engine brand and engine model number control the maintenance specs (spark plug gap, oil type/amount, air filter style) and help prevent ordering the wrong parts. Your mower model number controls chassis parts like the blade, drive system, and handle components.
Related parts you might replace on the mower (not engine-specific)
If you are servicing the cutting system or drive, these are common mower-side items:
- Blade: husqvarna lawn mower 22-inch deck 3-in-1 blade 532421825
- Drive cable: lawn mower drive cable 586638001
- Control cable: lawn mower control cable 587326601
Last updated: February 2026
What model number is the Craftsman 917370413?
The model number is 917370413. On Craftsman walk-behind mowers, that full number is the identifier you use to match the correct parts list, diagrams, and maintenance instructions for your specific mower.
Where to find the model number on the mower
We recommend confirming the tag on the mower so you match parts correctly.
- Check the model and serial tag on the rear of the deck near the discharge area
- Look on the handle support brackets or near the engine mounting area
- Compare the tag to the number printed on your paperwork and the 917370413 owner's manual
Why the model number matters for parts
Even small changes between mower versions can affect fit and safety. Using 917370413 helps ensure you get the right blade, cables, and discharge components.
Common parts that depend on the exact model include:
- Blade and blade hardware (length, center hole pattern)
- Drive system parts (drive cable, transmission, wheels)
- Discharge and mulching components (chute door, mulcher door, deflector)
- Handle and control parts (zone control cable, upper handle)
Examples of model-matched parts for 917370413
Here are a few parts listed for Craftsman model 917370413:
| Part type | Example part (from this model’s list) | What it affects |
|---|---|---|
| Blade | Husqvarna lawn mower 22-inch deck 3-in-1 blade 532421825 | Cut quality, mulching, bagging |
| Control cable | Lawn mower control cable 587326601 | Engine stop/zone control operation |
| Transmission | Lawn mower transmission assembly 589600601 | Self-propelled drive function |
Why it matters
Using the correct model number prevents ordering the wrong Craftsman mower parts and avoids issues like poor cutting performance, drive problems, or mismatched discharge hardware.
Last updated: February 2026
What year is Craftsman Model 917370413?
Craftsman model 917370413 is a model number, not a date code; it does not directly tell the year of manufacture. To find the year, we use the mower’s product identification label (often on the deck or rear housing) and decode the serial/date code shown there using the steps in the 917370413 owner's manual.
How to find the year on your mower
Look for the product label first; that label is what ties your specific mower to a build date.
- Check the top of the mower deck near the engine mounting area.
- Check the rear of the deck behind the bagger opening.
- Check the side of the deck near a rear wheel.
- Write down the serial number and any date code exactly as printed.
- Compare the format to the identification section in the manual.
Common date-code formats you may see
Different Craftsman walk-behind mowers use different label formats. Here are the most common patterns customers run into.
| What you see on the label | What it usually means | What to do |
|---|---|---|
| A clearly labeled “MFG DATE” | Direct manufacture date | Use that date as the year reference |
| A 6-digit code (MMDDYY) | Month, day, year | The last 2 digits are the year |
| A longer serial with letters and numbers | Factory/line plus date info | Match the format in the manual’s ID section |
Why it matters
The year matters for parts matching because Craftsman made running changes to items like the blade, drive system, and controls. Confirming the label date helps us choose the correct replacement parts for your exact build.
If you’re servicing the cutting system while you’re checking the label, the husqvarna lawn mower 22-inch deck 3-in-1 blade 532421825 is a common blade style used on many 22-inch Craftsman walk-behind decks; always match by your model and the blade’s mounting pattern.
Last updated: February 2026
Where can I find a Craftsman lawn mower model?
On a Craftsman walk-behind mower like model 917370413, the model number is typically printed on a label on the mower deck or frame (often near the rear wheels or height-adjuster area). Use that exact model number when ordering parts or checking specifications in the 917370413 owner's manual.
Where to look on a walk-behind mower
Check these common label locations first:
- Top of the mower deck, near the engine mounting area
- Rear of the deck, above or between the back wheels
- Side of the deck near the height adjuster knob or lever
- Handle support brackets (where the handle bolts to the deck)
- Under the rear discharge door or near the bagging opening
What the label usually shows (and what to write down)
The label can include several identifiers. For parts lookup, the model number is the key.
| Label item | What it’s used for | Example you might see |
|---|---|---|
| Model number | Correct parts diagrams and parts fit | 917370413 |
| Product number | Manufacturer tracking | Varies |
| Serial number | Warranty and production run | Varies |
Tips to make the model tag readable
If the sticker is dirty or faded, these steps usually help:
- Wipe the area with a damp rag and mild soap; dry it fully
- Use a flashlight at an angle to highlight faint printing
- Take a close-up photo and zoom in to read worn characters
- Copy the number exactly (including any dashes or extra digits)
Why it matters
Craftsman walk-behind mowers can look similar across years, but small changes affect fit. Using the exact model number helps ensure you get the right blade, control cable, drive cable, or discharge parts for your mower.
Last updated: February 2026
