Frigidaire LGGF3046TFA gas freestanding range Parts

Yes. We recommend looking up replacement parts for your Frigidaire LGGF3046TFA gas freestanding range by entering the full model number (LGGF3046TFA) so the parts list matches your exact burner, oven, and control configuration.

Where to find the model number on LGGF3046TFA

Your model and serial number are on the identification plate on the right-hand surface of the oven front frame. Open the storage drawer, warmer drawer, or broiler drawer (depending on your configuration) to access it. See the installation guide.

• Open the lower drawer fully
• Look for the identification plate on the right-hand front frame
• Write down the model number, serial number, and any lot number/letter
• Keep that information with your appliance records

How to use the model number to get the right part

Once you have the full model number, use it to pull up the correct diagrams and parts list, then match the part by name and ID.

• Enter LGGF3046TFA exactly as shown on the plate
• Use the exploded-view diagrams to confirm location and fit
• Match the part by part name and part ID (not just a description)
• If you are troubleshooting a no-heat bake issue, the bake igniter 316489403 is a common match for this model
• Order directly from the parts list for this model, or search by model number on Sears PartsDirect

Quick examples: model number vs. part identifiers

What you have	Example	What it does
Model number	LGGF3046TFA	Pulls up the correct parts list for your range
Part ID	316489403	Identifies a specific replacement part listing
Part number	5304508786	Manufacturer number used for cross-referencing

Why it matters

Ranges often look similar across model families, but burner ratings, fuel pressure setup, igniters, sensors, and control boards can differ. Using the exact model number from the identification plate helps prevent ordering the wrong Frigidaire range part.

Last updated: February 2026

On your Frigidaire LGGF3046TFA gas range, the model and serial tag you need for ordering the correct replacement part is typically on the serial plate; on many models it’s located behind the lower oven drawer or storage drawer. Use that model number to match parts exactly in our list.

Where to look on model LGGF3046TFA

Check these common locations first:

• Open the lower oven drawer or storage drawer and look for the serial plate on the frame area
• Along the oven door frame or interior-side trim (visible with the oven door open)
• On a side panel just inside the door opening
• In the use and care section of your LGGF3046TFA owner's manual (it references the serial plate location)

What to write down (and why)

Record these items from the tag before you shop or troubleshoot:

• Model number (example: LGGF3046TFA)
• Serial number (helps confirm production details)
• Purchase date (useful for your records)

Why it matters

Many Frigidaire ranges use similar-looking igniters, sensors, burner parts, and control components. Matching the exact model number prevents ordering a part that fits a different series.

Quick guide: model/serial vs. part number

What you have	Where you find it	What it’s used for
Model number	Serial plate/tag on the range	Identifies the correct parts list for your range
Serial number	Same serial plate/tag	Confirms the unit’s production identity
Part number	On the part itself or in the parts list	Identifies the exact replacement component

Ordering the right part

Once you have the model number from the serial plate, use the parts list for LGGF3046TFA to choose the exact replacement. For example, if you’re diagnosing an oven that will not heat, a common repair is replacing the bake igniter 316489403. You can also search by model number on Sears PartsDirect.

Last updated: February 2026

For a Frigidaire LGGF3046TFA gas range, most oven repairs typically cost about $150 to $400 when the fix is a common service call plus one or two parts. Costs go up when the repair involves major components (like the control board) or multiple parts; use the LGGF3046TFA owner's manual to narrow symptoms before replacing anything.

What usually drives the repair price

• Which system failed: bake, broil, convection fan, temperature sensing, or controls
• Parts needed: igniter, sensor, control board, door lock, wiring, or hardware
• Labor time: simple access vs. deeper disassembly
• Diagnostic fee: often applied toward the repair
• Safety checks: gas leak check and ignition verification after service

Common repairs and typical parts involved

These are frequent causes when an oven will not heat, heats unevenly, or will not ignite:

Symptom	Common cause	Example part on this model page
Bake will not ignite or takes a long time to light	Weak bake igniter	Bake igniter 316489403
Oven temperature is inaccurate	Failing temperature sensor	Range oven temperature sensor 316490000
Broil will not ignite	Weak broil igniter	Frigidaire range broil igniter 5304506545
Error codes, dead display, or erratic operation	Control problem	Range oven control board 5304509230

Quick checks we recommend before paying for a repair

• Confirm the range has power (display and oven light behavior can help)
• Try bake and broil; if one works and the other does not, that points to an igniter issue
• Watch for ignition: a glowing igniter that never lights the burner often indicates a weak igniter
• If food is consistently undercooked or overcooked, suspect the sensor and verify settings in the manual
• If an error code appears, match it to the symptom before replacing parts

Why it matters

Accurate troubleshooting prevents buying the wrong part and reduces labor time. On gas ranges like the LGGF3046TFA, igniters and sensors are common, lower-cost fixes; control and door-lock issues tend to push the total higher.

You can order model-matched replacement parts from the parts list for LGGF3046TFA, or search by model number on Sears PartsDirect.

Last updated: February 2026