Kenmore Elite 11024944301 washer Parts

Your Kenmore Elite washer’s model number is printed on the model and serial number label on the machine. For model 11024944301, the label shows the full model number (it typically starts with “110”) and a separate serial number; we use that model number to match the correct parts and manual.

Where to look on the washer

On Kenmore top-load washers like model 11024944301, the model/serial label is usually in one of these spots:

• Under the lid on the top rim of the washer opening
• On the underside of the lid
• Along the front edge of the tub opening (near the lid switch area)
• On the back of the control console (less common)
• On the rear panel of the cabinet

If the label is hard to read, wipe it gently with a damp cloth and good lighting; avoid harsh cleaners that can remove the print.

What to write down (and why)

Record these items exactly as shown on the label:

• Model number (example format: 110.24945, 110.24955, 110.24965; your full model is 11024944301)
• Serial number
• Purchase date (if available)

Why it matters

The model number identifies the exact design version of your washer, which determines the correct replacement parts (like a lid switch, drain pump, or motor coupling) and the right troubleshooting steps.

Quick ID checklist

Item on label	What it’s used for	Tip
Model number	Matching parts diagrams and part fit	Copy every digit exactly
Serial number	Production run details	Helpful for service history
Purchase date	Warranty paperwork and records	Keep with your receipt

For a picture of what the label looks like and where it’s referenced, check the owner's manual.

Last updated: February 2026

A Kenmore washer typically lasts 10 to 15 years. For your Kenmore Elite washer model 11024944301, regular preventive care (cleaning, correct loading, and hose checks) helps you reach the high end of that range; see the maintenance guidance in the owner's manual.

What affects washer lifespan most

• Load size and balance: chronic overloading and unbalanced loads increase wear on the basket drive, suspension, and gearcase.
• Water quality and detergent use: too much detergent can cause residue buildup and extra strain during drain and spin.
• Drain performance: slow draining makes the pump work harder and can leave standing water.
• Vibration and movement: excessive shaking accelerates wear on suspension components.
• Routine maintenance: periodic cleaning and inspections reduce corrosion and prevent small issues from becoming major repairs.

Maintenance steps that extend life

We recommend these practical habits for Kenmore top-load washers like the 11024944301:

• Clean the washer periodically and keep the lid open between loads to help moisture dry out.
• Check inlet hoses for bulges, cracking, or seepage; replace at the first sign of deterioration.
• Use the correct amount of HE detergent (if applicable to your cycle and detergent type) and avoid overdosing.
• Level the washer and keep it stable to reduce vibration-related wear.
• Address draining issues early; a worn pump such as the washer drain pump WP3363394 is a common fix when the washer will not drain or drains slowly.

Quick guide: repair or replace timing

Washer age	Typical situation	Practical next step
0 to 5 years	Usually worth repairing	Fix the specific failure and keep up maintenance
6 to 10 years	Depends on repair cost and condition	Repair common wear items; reassess if multiple failures occur
11 to 15 years	End-of-life range for many washers	Repair only if the fix is straightforward and the machine is otherwise solid

Why it matters

Knowing the typical 10 to 15 year lifespan helps you decide whether a symptom is normal wear (like draining or agitation issues) and whether replacing a wear part is a smart investment for your Kenmore Elite 11024944301.

Last updated: February 2026

Yes, repairing a Kenmore Elite washer like model 11024944301 is worth it when the problem is a common wear item (drain pump, lid switch, coupling, agitator parts) and the washer is otherwise in good shape. It becomes less worthwhile when the repair involves major drive or tub components and the total cost approaches the price of replacement.

Quick way to decide

Use these checkpoints before you buy parts or schedule service:

• Symptom is isolated (won’t drain, won’t spin, won’t agitate) and the washer isn’t leaking heavily.
• Repair is a common, lower-cost part such as a pump, lid switch, or motor coupling.
• No repeated breakdown pattern (multiple different failures in a short time).
• Basket and tub are sound (no severe rust-through, cracks, or chronic seal leaks).
• You can do the repair safely with power unplugged and water shut off.

For model-specific operating and care guidance that can prevent repeat failures, use the owner's manual.

Repairs that are usually worth it on this model

These are frequent fixes on many Kenmore 110-style top-load designs and typically restore normal washing quickly:

Problem you see	Common fix area	Example part for this model
Won’t drain or leaves water in tub	Drain system	Washer drain pump WP3363394
Won’t start or won’t spin with lid closed	Lid safety circuit	Washer lid switch assembly WP8318084
Agitates poorly or makes ratcheting noise	Agitator drive	Agitator dog 80040
Motor runs but washer won’t agitate/spin	Drive coupling	Washer motor coupling 285753A

When replacement is the better value

We recommend leaning toward replacement when one or more of these are true:

• The washer needs major drive system work (gearcase, drive tube, clutch, basket drive) plus additional worn parts.
• You have tub or basket damage that requires large assemblies.
• The washer has multiple symptoms (noise, leaks, poor spin, and electrical issues together).
• The repair requires extensive teardown and the washer has already had several major repairs.

Why it matters

A targeted repair keeps a dependable Kenmore washer running for years, especially when you address the root cause (for example, a failing lid switch stopping spin, or a worn coupling preventing agitation). Using the correct parts for 11024944301 also reduces repeat breakdowns and installation rework.

Last updated: February 2026

To reset your Kenmore Elite washer model 11024944301, we recommend a simple power reset first: unplug the washer for 1 minute, plug it back in, then set a cycle and pull the timer knob out to start. This clears most temporary control or cycle glitches.

Quick reset steps (safe, no tools)

• Turn the Cycle Selector Control (Timer) knob to OFF.
• Unplug the washer for 1 minute.
• Plug it back into a grounded outlet (no extension cord).
• Close the lid fully.
• Turn the timer knob clockwise to a normal cycle.
• Pull the timer knob out to start.

If the washer stops mid-cycle, the manual procedure is to push the timer knob in to stop, then close the lid and pull the knob out to restart. See the owner's manual.

If it still will not start after a reset

These checks target the most common “won’t run” causes on this style of Kenmore top-load washer.

• Confirm the lid is closed; this washer will not agitate or spin with the lid open.
• Verify the outlet has power; reset the breaker if needed.
• Make sure the timer knob is lined up on a cycle; push in, turn slightly clockwise, then pull out again.
• Avoid overloading; smaller loads help the motor start and spin correctly.
• If the washer acts like the lid is open even when shut, inspect or replace the washer lid switch assembly WP8318084.

What “reset” can and cannot fix

A reset helps when the timer or cycle sequence gets out of sync. It does not fix a failed mechanical or electrical part.

Symptom after reset	Most likely area to check	Common related part on this model
Won’t agitate, but motor runs	Drive connection	Washer motor coupling 285753A
Won’t drain or spin	Drain path or pump	Washer drain pump WP3363394
Stops when lid is shut	Lid safety circuit	Washer lid switch assembly WP8318084

Why it matters

Resetting correctly prevents unnecessary part replacement and helps you confirm whether the issue is a temporary control/timer hang-up or a real failure (lid switch, drain pump, or motor coupling).

Last updated: February 2026

The Kenmore Elite washer model 11024944301 has a 4.0 cu. ft. wash basket capacity. For the most reliable confirmation tied to your exact unit, we recommend checking the specifications section in the 11024944301 owner's manual.

Where to verify the capacity in the manual

Use the manual to match the spec to your exact model and configuration.

• Open the 11024944301 owner's manual
• Look for Specifications, Features, or Washer capacity
• If you see volume listed in liters or gallons, use the conversion table below
• If you see only basket dimensions, use the measurement method in the next section

If you need to calculate capacity from basket measurements

This is useful when you are comparing baskets or confirming a replacement tub or basket.

• Unplug the washer before measuring
• Measure the inside diameter of the wash basket
• Measure the usable depth (bottom to the highest normal fill level)
• Convert inches to feet (divide by 12)
• Calculate: π × radius² × depth

Conversion table

If volume is listed as	Convert to cubic feet
Gallons	gallons ÷ 7.48
Liters	liters ÷ 28.32

Why it matters

Capacity affects how much laundry you can wash effectively and how well the load balances during spin. Overloading can increase vibration and strain on drive and suspension parts such as the washer suspension spring WP63907 and the washer motor coupling 285753A.

Last updated: February 2026