Owner’s manual
Error Codes
Does KitchenAid make a 33 inch wide refrigerator?
Yes. KitchenAid makes 33-inch-wide refrigerators across multiple styles (such as bottom-freezer and side-by-side). For exact width and fit details, we recommend confirming the published dimensions in the owner's manual for the specific model you are considering.
What to know about “33-inch wide”
A “33-inch” refrigerator is typically designed to fit a 33-inch cabinet opening, but the actual measured width can vary slightly by model and by how the doors and hinges are built.
- Measure the cabinet opening width, height, and depth
- Leave clearance for door swing and handles
- Allow airflow space around the refrigerator (top, sides, and back)
- Confirm the water line location if you want ice and water
- Check that the unit can be moved through doorways and hallways
Quick fit checklist (recommended measurements)
Use this checklist before you buy or replace a refrigerator:
| What to measure | Why it matters | Typical target |
|---|---|---|
| Cabinet opening width | Prevents binding and vibration | 33 in opening for a 33 in class unit |
| Door swing clearance | Ensures doors open fully | Extra space on hinge side |
| Depth to obstacles | Avoids handle or door interference | Depends on handle style |
| Water supply access | Enables ice maker/dispenser | 1/4 in water line nearby |
How this relates to your KSF26C4XYY00
Your KitchenAid KSF26C4XYY00 is a side-by-side refrigerator model. If you are comparing it to a 33-inch-wide unit, focus on the installation dimensions and required clearances so the doors seal correctly and the unit ventilates properly.
Why it matters
A refrigerator that is even slightly too wide (or installed without clearance) can cause door sealing problems, poor cooling performance, and extra noise from vibration.
Last updated: February 2026
How do I reset a KitchenAid icemaker?
To reset the ice maker on your KitchenAid KSF26C4XYY00 side-by-side refrigerator, we power-cycle the ice maker (or the refrigerator) and then run a harvest or reset sequence if your ice maker has a reset/test button. This clears minor control glitches and restarts the ice-making cycle.
Quick reset steps (most common)
- Turn the ice maker OFF using the ice maker switch or arm.
- Wait 30 seconds.
- Turn the ice maker ON again.
- Wait 10 to 15 minutes to see if it starts a cycle.
- If your model has a reset/test button, press and hold it until the cycle starts (often a few seconds).
For the exact control location and the correct button sequence for KSF26C4XYY00, follow the steps in the owner's manual.
If it still will not make ice
These checks fix the most common “no ice” situations after a reset:
- Confirm the freezer is cold enough (target 0°F; ice makers struggle above 10°F).
- Make sure the water supply valve is fully open and the water line is not kinked.
- Replace a clogged water filter; a restricted filter can slow fill and stop ice production.
- Purge air from the water system after filter changes.
- Check for a frozen fill tube or ice jam in the mold.
Common parts involved
| Symptom | What it points to | Part on this model page |
|---|---|---|
| Slow fill, hollow cubes, no ice | Water supply restriction | Refrigerator water filter EDR1RXD1 |
| No water to ice maker and dispenser issues | Inlet valve not opening consistently | Refrigerator water inlet valve WPW10341320 or refrigerator water inlet valve WPW10238100 |
| Ice maker will not cycle even with good water | Ice maker module/assembly issue | Refrigerator ice maker assembly WPW10251076 |
Why it matters
A reset is a fast way to clear a stalled ice maker cycle, but if the underlying issue is low water flow (filter or inlet valve) or a failing ice maker assembly, the problem returns quickly. Checking temperature and water flow prevents repeat failures.
Last updated: February 2026
Is side-by-side better than a French door?
A side-by-side is “better” than a French door when you want easy access to both fresh and frozen foods at eye level and you prefer narrower door swing clearance; a French door is usually better for wide fresh-food storage. For your KitchenAid KSF26C4XYY00, the best choice depends on how you use refrigerator and freezer space.
Quick comparison
| Feature | Side-by-side (like KSF26C4XYY00) | French door |
|---|---|---|
| Fresh-food space for wide platters | More limited | Usually better |
| Freezer organization | Tall, narrow shelves; good visibility | Often deeper drawers |
| Door swing clearance | Narrower doors; easier in tight kitchens | Wider doors; may need more clearance |
| Everyday access | Fridge and freezer both at eye level | Fridge at eye level; freezer lower |
Choose a side-by-side if you want
- Frozen foods at eye level (less bending for daily freezer use)
- Narrower doors for tighter walkways or islands
- More vertical shelf space for boxed items
- A layout that makes it easy to “see everything” in both compartments
Choose a French door if you want
- More uninterrupted refrigerator shelf width for trays, pizza boxes, and platters
- A larger, drawer-style freezer for bulky bags and stacked items
- Fresh-food storage as the main priority (common for meal prep and produce)
Why it matters
Your refrigerator style affects food organization, kitchen clearance, and even maintenance habits. For example, if you use filtered water and ice heavily, staying on schedule with filter changes helps keep taste and flow consistent; see the owner's manual for your model’s recommended care and settings.
Last updated: February 2026
