Kenmore 25594689010 refrigerator Parts

Kenmore refrigerators typically last 10 to 15 years. With steady upkeep (good airflow, clean coils, tight door seal, and correct temperatures), many units reach the high end of that range; compact models like Kenmore 25594689010 often follow the same expectation. For model-specific care and operating guidance, use the owner's manual.

A refrigerator’s life is mostly driven by compressor run time, heat removal, and how hard the sealed system has to work.

• Heat and ventilation: Poor clearance makes the compressor run hotter and longer.
• Dirty condenser area: Dust buildup increases run time and wear.
• Door seal leaks: Warm air infiltration causes longer cycles and frost.
• Overloading and frequent door openings: Adds heat load and moisture.
• Power quality: Surges and repeated outages stress electronics and the compressor.

Your manual calls out clearances that help the refrigerator run efficiently:

Keeping these clearances reduces compressor strain and helps stabilize temperatures.

Use this as a simple routine for Kenmore compact refrigerators:

• Vacuum dust from the condenser area and around the compressor compartment.
• Confirm the door closes squarely and the gasket seals all the way around.
• Keep the temperature control set to a steady, food-safe setting (avoid frequent changes).
• Level the unit so the door self-closes and doesn’t swing open.
• Clean spills promptly to prevent odors and corrosion.

Most “early failures” come from overheating and long run times. Good airflow and basic cleaning reduce compressor workload, which is the biggest factor in how long a refrigerator lasts.

Last updated: February 2026

On your Kenmore compact refrigerator, the model number is typically on the rating label inside the fresh food compartment, most often on a side wall near the crisper area or lower interior wall. For label locations and what the tag looks like, use the 25594689010 owner's manual.

• Inside the refrigerator compartment on the left or right interior wall
• Near the bottom interior wall behind where the crisper drawer sits
• On the cabinet frame just inside the door opening (hinge side)
• Behind the lower front kick plate or grille area (if your unit has one)
• On the back exterior panel near the power cord entry

The rating label usually lists both a model number and a serial number. Write both down before ordering parts.

Kenmore refrigerators can look similar across multiple series, but shelves, door parts, and interior accessories can differ by model. Using the exact model number helps ensure parts like a rack or shelf fit correctly.

If you are replacing an interior accessory on model 25594689010, match the part name and ID exactly when ordering, such as the midea rack, large 501112840112 or the midea refrigerator shelf 12931000000854.

Last updated: February 2026

Yes. We still offer replacement parts for Kenmore refrigerators, including model 25594689010; you can match parts by model number and replace common items like shelves, door components, and interior accessories to keep your compact refrigerator working and organized.

For this compact refrigerator, we commonly see customers replace storage and trim pieces first.

• Door and exterior pieces (example: midea door-black 503700140025)
• Shelving and racks (example: midea rack, large 501112840112)
• Ice and freezer accessories (example: midea ice tray 501113810004)
• Drain and moisture management parts (example: midea refrigerator drip tray 12131000012819)
• Small trim pieces (example: midea refrigerator strip 501112840212)

Use the model number 25594689010 and compare the part description to what you have in the refrigerator. Our owner's manual also shows the major “Parts & Features” so you can identify items like the drip tray, can shelf, and slide-out wire shelves.

• Check the part name and part ID before ordering
• Compare the location and function (door shelf vs. wire shelf vs. can shelf)
• Inspect for color/finish differences (especially doors and trim)
• Verify what is missing or broken (cracks, warped shelves, loose fit)

Using the correct Kenmore 25594689010 parts helps ensure proper fit, stable storage, and normal day-to-day use. Even small items like racks and drip trays affect organization, spills, and cleanup.

Last updated: February 2026

For Kenmore model 25594689010, the most reliable way to confirm cubic-foot capacity is to use the specifications listed in the 25594689010 owner's manual or on the refrigerator’s rating label inside the cabinet. That gives the exact capacity for your specific compact refrigerator configuration.

Use these options in order; they are the quickest and most accurate for this model.

• Check the rating label inside the fresh food compartment (often on a side wall). Capacity is commonly listed with other specs.
• Look in the specifications section of the 25594689010 owner's manual.
• If the label is missing or unreadable, measure the interior and estimate (see below).

If you cannot read the label, you can estimate interior volume.

1. Measure usable interior width, depth, and height in inches (exclude thick door bins and rounded corners).
2. Multiply: width x depth x height to get cubic inches.
3. Convert to cubic feet: divide by 1,728.

Cubic-foot capacity helps us match the right storage accessories and organize airflow. Overpacking a compact refrigerator can reduce cooling performance and increase frost buildup in the freezer compartment.

If you are trying to restore original storage capacity, these common storage parts for this model can help:

• Midea rack, large 501112840112 (main shelf/rack replacement)
• Midea refrigerator shelf 12931000000854 (interior shelf)
• Midea can shelf 501112840114 (door can shelf)

Last updated: February 2026

Kenmore model numbers tell us the exact product family and configuration so we can match the right parts and instructions. For your Kenmore compact refrigerator model 25594689010, the full model number on the ID label is the one we use for parts lookup and for the correct owner's manual.

On Kenmore compact refrigerators like 25594689010, the model and serial information is typically on a sticker or plate in one of these spots:

• Inside the fresh food compartment on a side wall
• Around the door opening (cabinet frame)
• On the back panel near the compressor area
• Occasionally behind the kick plate or near the lower front edge

Kenmore model numbers are usually a long string of numbers (sometimes with a prefix). In general, the sections help identify who built the unit and which design series it belongs to.

• Prefix (often the first 3 digits): identifies the manufacturing source for many Kenmore appliances
• Middle digits: identify the base model or series
• Last digits: identify variations (color, revision, feature differences)

Even one digit off can change the door, shelves, or interior trim on compact refrigerators.

• Use the entire model number exactly as printed (for example, 25594689010)
• Match the model number before ordering items like a door, shelf, or rack
• If you are replacing interior items, compare the part name to what’s in your unit (rack vs. can shelf vs. drip tray)
• Use the parts list for this model when choosing replacements

These are examples of parts that often depend on the exact model variation:

• Midea door-black 503700140025
• Midea refrigerator shelf 12931000000854
• Midea can shelf 501112840114

Using the correct Kenmore model number ensures we pull the right diagrams, parts, and procedures. That is especially important on compact refrigerators where door shelves, racks, and drip trays can look similar but mount differently.

Last updated: February 2026