Kenmore 79091062602 electric range Parts

For Kenmore electric range model 79091062602, the oven’s exact wattage depends on which heating function is running (bake or broil) and whether the surface elements are also on. Most electric ovens draw roughly 2,000 to 5,000 watts while actively heating; confirm your model’s ratings in the 79091062602 owner's manual.

Typical wattage you can expect

Electric ranges cycle the heating elements on and off to hold temperature, so the oven does not pull maximum wattage continuously.

• Bake element: commonly 2,000 to 3,500 watts
• Broil element: commonly 3,000 to 4,500 watts
• Oven light: typically 40 watts (when on)
• Surface elements: often 1,200 to 2,500 watts each, depending on size

If your oven light is out, this model uses a 40-watt appliance bulb; see appliance light bulb, 40-watt 316538904.

Quick way to estimate amps from watts

Use this to sanity-check whether a circuit is being overloaded.

Supply voltage	Example load	Approx. current draw
240V	3,000W bake	12.5A
240V	4,500W broil	18.8A
120V	40W oven light	0.3A

Where the real number is listed

Look for the appliance rating information (often on the serial plate area and in the documentation).

• Check the electrical ratings section in the 79091062602 owner's manual
• Compare bake vs. broil ratings (they are usually different)
• Add surface element wattage only if you run cooktop and oven at the same time

Why it matters

Wattage affects preheat performance, how quickly the oven recovers temperature, and whether running multiple loads (oven plus burners) can trip a breaker or stress wiring.

Last updated: January 2026

For the Kenmore electric range model 79091062602, the installation dimensions show an overall width of about 30 inches (listed as 29-7/8 inches). This is the standard cabinet opening size used for most freestanding 30-inch electric ranges; confirm your exact fit in the installation guide.

What the installation dimensions mean

The width spec is about fitting the range between cabinets and aligning the cooktop with the countertop.

• Overall range width: 29-7/8 inches (commonly called a “30-inch range”)
• Typical cabinet opening: 30 inches
• Clearance note: follow the minimum side and overhead clearances shown in the guide
• Door-open space: plan for extra room in front when the oven door is open

Quick size reference (model 79091062602)

Measurement	What it’s used for	Value shown in install dimensions
Width	Cabinet fit between counters	29-7/8 in (30-in class)
Depth (with handle)	How far it sticks out from the wall	28-13/32 in

Why it matters

Getting the width right prevents installation headaches like rubbing cabinet faces, misaligned countertops, and gaps that can trap heat and grease. It also helps ensure the anti-tip bracket lines up correctly during installation.

Before you buy or install

• Measure the cabinet opening width at the front and back
• Check for level flooring where the leveling legs sit
• Verify your electrical supply location and cord/conduit routing
• Confirm required clearances to cabinets and hood
• Follow anti-tip bracket steps in the installation guide

Last updated: January 2026

On Kenmore electric range model 79091062602, the model and serial number are printed on an identification (serial) plate located on the right side of the oven front frame, behind the storage drawer or lower panel area. Confirm the exact spot using the 79091062602 owner's manual.

How to find it (fast steps)

• Turn the range off and let it cool completely.
• Pull the storage drawer fully open (some models).
• If your range has a lower panel instead of a drawer, remove that panel.
• Look on the right side of the oven front frame for a sticker or metal plate.
• Write down both the model number and serial number for parts lookup and service.

What the label typically looks like

What you may see	What it means	Why you need it
Model number (starts with 790.)	Identifies the exact Kenmore range design	Ensures correct parts fit
Serial number	Identifies your specific unit	Helps match production version
Electrical ratings	Voltage/amps info	Useful for installation and troubleshooting

Why it matters

We use the model number to match the correct diagrams and parts for your exact range configuration. Even small differences within the Kenmore 790 series can change which bake element, control, or surface element parts fit.

If you cannot access the drawer area

• Check for items jammed in the drawer that prevent it from opening.
• Use a flashlight and look along the front frame edges.
• If the drawer is off-track or stuck, follow the access and removal steps in the 79091062602 installation guide.

Last updated: January 2026