Kenmore Elite 66512773K311 dishwasher Parts

For Kenmore Elite dishwasher model 66512773K311, the most reliable “hard reset” is to cancel the current cycle and reset the control: open the door, then press and hold CANCEL/DRAIN until the drain starts; if you need a full control reset, press and hold CANCEL/DRAIN twice, then reselect a cycle and press START/RESUME. See the 66512773K311 use & care manual.

1. Open the door slightly and wait for spraying to stop.
2. Press and hold CANCEL/DRAIN until the Cancel/Drain light turns on.
3. Close the door; the dishwasher will drain if water is present.
4. To fully reset the control, press and hold CANCEL/DRAIN twice.
5. Select a new cycle and options.
6. Press START/RESUME and close the door within 3 seconds.

These checks are specific to how this model is designed to run:

• Make sure Control Lock is off (press and hold TOP RACK ONLY for 3 seconds).
• If START/RESUME is blinking, press START/RESUME and close the door within 3 seconds.
• Confirm the door is fully closed and latching; a worn latch can prevent starting.
• If the unit drains but will not run, check for a tripped breaker or blown fuse.
• If the dishwasher won’t respond to any buttons, the control board may be the issue.

Resetting correctly clears a stuck cycle and gets the control back to a known state. On model 66512773K311, many “won’t start” complaints are actually caused by the Start/Resume 3-second door-close requirement or Control Lock, not a failed part.

Last updated: January 2026

On Kenmore Elite model 66512773K311, you can force a drain by stopping the current cycle and running the built-in Cancel/Drain sequence. Open the door to stop spraying, press and hold CANCEL/DRAIN until the light turns on, then close the door and let it drain (about 2 minutes). See the steps in the 66512773K311 use & care manual.

• Open the door slightly to pause the cycle; wait until spraying stops.
• Press and hold CANCEL/DRAIN until the Cancel/Drain light turns on.
• Close the door.
• Let the dishwasher run the drain cycle; the light should turn off after about 2 minutes.
• If you opened the door during a cycle and want to resume later, press START/RESUME and close the door within 3 seconds.

If water remains after the Cancel/Drain sequence, we recommend checking these common causes:

• Drain hose kinked, pinched, or routed incorrectly (high loop/air gap issues).
• Garbage disposer knockout plug not removed (if connected to a disposer).
• Food blockage in the drain path, filter area, or disposer inlet.
• Drain pump not running or jammed (a common service part is the dishwasher drain pump WPW10531320).
• Excess suds from the wrong detergent (suds can interfere with draining).

Standing water can lead to odors, poor wash performance, and repeated drain problems. For this Kenmore Elite dishwasher, the Cancel/Drain function is the fastest way to clear the tub before troubleshooting the drain hose, disposer connection, or drain pump.

Last updated: January 2026

Common problems on the Kenmore Elite 66512773K311 dishwasher include poor cleaning, not draining, not filling, leaks, and drying issues. On this model, many complaints trace back to loading, water temperature, rinse aid use, and routine filter maintenance rather than a failed control.

• Not cleaning well: dirty filter, blocked spray arm holes, low incoming water temperature, or overloaded racks
• Water left in tub (not draining): kinked drain hose, disposer knockout plug not removed, or a drain pump problem
• Not filling: water supply shutoff closed, float stuck, or a water inlet valve issue
• Leaking: worn door seals, door not closing squarely, or oversudsing from incorrect detergent
• Not drying: rinse aid empty, dry option not selected, or plastics loaded where they trap water

• Clean the ULTRACLEAN filter regularly; the steps are in the 66512773K311 use & care manual
• Run hot water at the sink before starting; dishwashers typically perform best with about 120°F water entering
• Load so tall items do not block the detergent dispenser door or spray arms
• Keep rinse aid filled for better drying and fewer spots
• If draining is slow, confirm the drain hose is routed high under the counter or through an air gap (if used)

Fixing the root cause early helps prevent repeat wash failures, standing-water odors, and leaks that can damage cabinets. For the 66512773K311, correct loading plus regular filter cleaning are two of the biggest performance boosters.

Last updated: January 2026