Kenmore 58714012403 dishwasher Parts

Yes. We still carry replacement parts for Kenmore dishwashers, including model 58714012403. The key is matching parts by the full model number so you get the correct fit and connections for items like door seals, drain hoses, inlet valves, and racks; confirm details in the 58714012403 owner's manual.

How to make sure you order the right part

Use your model number (58714012403) and then match the part by name and symptoms.

• Find the model number on the dishwasher’s rating label (typically on the tub frame near the door).
• Compare the part description to your issue (leak, no drain, won’t fill, rack problems).
• Check whether the repair involves water, drain, or electrical connections before starting.
• For installation requirements (power, hot water supply, leveling, anchoring), follow the 58714012403 installation guide.
• If your dishwasher connects to a garbage disposer, make sure the disposer inlet plug is knocked out for first-time hookups.

Common parts customers replace on this model

These are examples of parts we commonly see replaced on Kenmore 58714012403 dishwashers:

Symptom	Likely area	Example part for this model
Water leaking at the bottom of the door	Door sealing	Dishwasher door seal 809006501
Not draining or draining slowly	Drain path	Hose 807117001 or dishwasher drain pump A00126501
Not filling or fills poorly	Water supply	Valve 154637401
Dishes not drying well	Heating circuit	Heater 154665201

Why it matters

Dishwasher parts are model-specific because mounting points, hose routing, and electrical connectors vary. Using the exact 58714012403 model number helps prevent leaks, poor draining, and repeat repairs.

Last updated: February 2026

To identify your Kenmore dishwasher model, open the door and look for the rating label on the inside edge of the tub (commonly along the left side). That label lists the model number and serial number you can use to match parts and manuals for model 58714012403.

Where to find the model and serial label

Check these common label locations on Kenmore dishwashers like 58714012403:

• Inside the door opening on the tub frame (left or right side)
• Along the top edge of the tub opening
• On the side wall of the tub near the front
• Occasionally behind the toe-kick area (less common)

For the exact label location and how it’s shown for your unit, use the 58714012403 owner’s manual.

What to write down (and why)

Record both numbers exactly as shown:

• Model number: identifies the exact design family for correct parts
• Serial number: helps confirm production details when parts changed mid-run
• Color code or suffix (if shown): can affect door and panel parts

Quick check table

What you see on the label	What it’s used for	Example result
Model number	Matching parts diagrams and repair parts	58714012403
Serial number	Verifying version and date range	Letters and numbers
Color/suffix	Matching cosmetic parts	Varies

Why it matters

Kenmore model numbers can look similar, but small differences can change fit for key items like the door seal, drain hose, or water inlet valve. Using the exact model number prevents ordering the wrong dishwasher parts.

Last updated: February 2026

Repairing a Kenmore dishwasher is worth it when the problem is a single, fixable failure (leak, no-drain, door not sealing) and the tub and racks are still in good shape; for model 58714012403, replacing common wear parts often restores reliable cleaning for far less than replacement.

Quick way we decide: repair vs. replace

• Repair when the issue is isolated (seal leak, drain problem, latch problem) and the unit runs a full cycle.
• Replace when you have repeated breakdowns, heavy rust in racks or tub damage, or multiple major parts failing at once.
• Repair when you can confirm basics like proper water temp and pressure (this model performs best with incoming water at 120°F and household water pressure 20 to 120 psi).
• Replace when performance problems continue even after cleaning, correct loading, and fresh detergent.

Common repairs that are usually “worth it” on model 58714012403

These are frequent, straightforward fixes that typically solve the complaint without major teardown:

• Door leaking at the bottom: replace the dishwasher door seal 809006501
• Dishwasher will not drain or drains slowly: inspect the drain path; replace the hose 807117001 if kinked, split, or restricted
• Poor drying or water not heating: test and replace the heater 154665201 if failed
• Overfilling symptoms: check float movement and replace the switch 154773201 if it does not switch correctly

Cost-to-benefit checklist

What you’re seeing	Most likely direction	Why
One clear symptom (leak, no-drain, no-heat)	Repair	Single-part fixes are common and predictable
Multiple symptoms at once (leak + no-drain + no-heat)	Replace	Stacked failures usually mean higher total cost
Dishes still dirty after basic maintenance	Repair first	Loading, spray-arm blockage, water temp/pressure are often the cause

Why it matters

A targeted repair keeps your kitchen setup intact and avoids installation work. It also restores performance when the root cause is something simple like a worn seal, restricted drain hose, or failed heating circuit.

What to check before buying parts

• Disconnect power before servicing; repairs should be done by a qualified technician.
• Confirm hot water supply is at least 120°F.
• Confirm water pressure is 20 to 120 psi.
• Make sure items are not blocking the spray arm rotation.
• Verify the overfill protector (float) moves freely.

For model-specific operating and care guidance, use the 58714012403 owner's manual.

Last updated: February 2026

Your Kenmore 58714012403 dishwasher is built around a wash system (pump, spray arm, filter, heater), a fill and drain system (water inlet valve, drain hose, drain pump), and door components (latch, seal, panels) that keep water in and the cycle running safely. See the 58714012403 owner's manual for diagrams and part locations.

Main dishwasher parts (what they do)

• Heating element: heats water and helps drying; let it cool before cleaning the tub area.
• Spray arm/tower assembly: spins and sprays water to clean dishes.
• Filter: traps food soil; the interior and filter are generally self-cleaning with normal use.
• Detergent dispenser: releases detergent at the right time; loading should not block it.
• Racks and silverware basket: hold dishes so spray reaches all surfaces.
• Overfill protector (float): helps prevent overfilling; it should move up and down freely.

Common replaceable parts for this model

These are frequently replaced items we see on Kenmore 58714012403 dishwashers:

System	Part example	What you notice when it fails
Door sealing	Dishwasher door seal 809006501	Leaks at the bottom or corners of the door
Filling	Water inlet valve	Slow fill, no fill, or weak wash due to low water level
Draining	Drain hose, drain pump	Standing water, poor draining, gurgling at end of cycle
Heating	Heating element	Poor drying, cooler wash water, longer cycles

Why it matters

Knowing which system a symptom belongs to speeds up troubleshooting. For example, leaks usually point to door sealing or hose connections, while poor cleaning often points to loading, spray arm movement, or water temperature.

Quick checks we recommend

• Load so large items do not block the detergent dispenser from opening.
• Make sure pan handles do not block spray arm rotation.
• If your dishwasher drains into a disposer, make sure the disposer is empty before starting.
• If you have hard water, clean buildup as needed so parts like the overfill protector move freely.

Last updated: February 2026

Kenmore dishwasher model 58714012403 is a standard built-in dishwasher size; it’s designed to fit a typical 24-inch-wide cabinet opening with an adjustable height range to match common countertop-to-floor openings. For the exact fit and leveling details, use the 58714012403 installation guide.

Typical fit dimensions you should plan for

Most Kenmore built-in dishwashers in this series are planned around standard kitchen cutouts. Use these as planning numbers, then confirm your cabinet opening and connections.

• Width: typically 24 inches (built-in opening)
• Cabinet opening height: commonly 33-3/4 inches minimum to fit without modifying countertop or flooring
• Height adjustment: front and rear leveling legs adjust to match the opening
• Depth: varies by installation and door style; allow extra space for hoses and wiring

How to measure your opening (the quick, accurate way)

Measure before ordering parts or scheduling installation.

• Measure from the underside of the countertop to the floor at the front and back
• Confirm the opening is at least 33-3/4 inches if you have built-up flooring
• Check that the dishwasher can be leveled side-to-side and front-to-back
• Verify you have clearance for the drain hose routing through the cabinet wall

Cabinet opening height guidance (common targets)

What you measure	What it means	What you do
33-3/4 in or more	Unit fits without modifying countertop/flooring	Raise levelers fully, then level the unit
Around 34 in to 34-1/2 in	Normal built-in range	Adjust front and rear levelers per the guide
Less than 33-3/4 in	Too tight for most installs	Correct the opening before installing

Why it matters

Correct sizing prevents door interference, leaking at the tub-to-door area, and strain on the drain hose and wiring. A dishwasher that is too tall or not level can also cause poor draining and noisy operation.

If you’re replacing a worn seal after confirming fit, the dishwasher door seal 809006501 is a common leak-related part for this model.

Last updated: February 2026