Can you still get parts for a Kenmore dishwasher?
Yes. We still carry replacement parts for many Kenmore dishwashers, including model 58715248700, as long as the specific component is available. The key is matching parts by your full model number so you get the correct fit for items like the door seal, drain hose, inlet valve, or heating element.
How to find the right part for Kenmore 58715248700
Use the model number 58715248700 to match the exact part listing and diagram callouts in the 58715248700 owner's manual.
- Confirm the model number from the serial label (typically on the right side of the tub opening)
- Identify the symptom (leak, not draining, not filling, not heating)
- Match the part name and ID exactly before ordering
- Replace worn seals and gaskets when you open the sump or pump area
- After any hose replacement, route hoses to avoid kinks
Common parts customers replace on this model
These are frequently needed for leaks, draining problems, and door sealing:
| Problem you notice | Common fix | Example part for this model |
|---|---|---|
| Water leaking at the bottom of the door | Replace the lower door seal | Dishwasher door seal 809006501 |
| Dishwasher will not drain well | Check for kinks, then replace drain hose if damaged | Hose 807117001 |
| Dishwasher not filling or fills slowly | Replace the water inlet valve | Valve 154637401 |
| Water not heating or poor drying | Check heater circuit, replace heater if failed | Heater 154665201 |
Why it matters
Ordering by model number prevents wrong-part returns and repeat repairs. It also helps you fix the root cause faster, especially on issues tied to installation details like hose routing, hot water supply, and proper leveling.
Installation notes that affect parts and performance
From the installation guidance for this dishwasher, these items directly impact how well it runs:
- Use a 15 to 20 amp, grounded, 120V AC electrical supply
- Connect to a hot water supply with adequate pressure for proper filling
- Flush the water line before final connection to help prevent filter screen clogging
- Avoid kinked water or drain hoses (kinks can cause fill or drain problems)
- Level the dishwasher for best sound and wash performance
For the full step-by-step requirements, use the 58715248700 installation guide.
Last updated: February 2026
Is it worth repairing a Kenmore dishwasher?
Yes, it’s usually worth repairing a Kenmore dishwasher like model 58715248700 when the problem is a common wear item (seal, hose, valve, heater) and the repair cost stays well below the price of a replacement; repairs also help you keep a unit you already know fits your kitchen and hookups.
Quick way we decide: repair vs replace
Use these checkpoints first:
- Age: Under 10 years old typically favors repair; over 10 years old depends on the part and overall condition.
- Repair cost: If the total repair is under about 50% of replacement cost, repair is the better value.
- Symptom type: Leaks, draining issues, and poor heating are often straightforward part replacements.
- Condition: Rusted racks, cracked tub, or repeated electrical issues push toward replacement.
- DIY comfort: If you can safely shut off power and water, many fixes are manageable.
Common “worth it” repairs on model 58715248700
These are frequent, practical fixes that often restore normal operation:
| Symptom | Likely area | Example part for this model |
|---|---|---|
| Water leaking at the door | Door sealing surface | Dishwasher door seal 809006501 |
| Not draining or drains slowly | Drain path, pump, hose routing | Hose 807117001 |
| Not filling or fills slowly | Water supply and inlet valve | Valve 154637401 |
| Dishes not drying well | Heating circuit | Heater 154665201 |
What to check before spending money
We recommend these no-cost checks first because they often solve “needs repair” complaints:
- Confirm the water supply valve is fully open and the inlet line is not kinked.
- Make sure the drain hose has a proper high loop and is not pinched.
- Clean the filter area and check for debris that can block circulation and draining.
- Load sharp items so they cannot cut the door seal (this is a common cause of new leaks).
- If the dishwasher drains into a disposer, make sure the disposer is clear before running.
For model-specific operating and care guidance, use the 58715248700 owner’s manual.
Why it matters
A dishwasher that fills, heats, and drains correctly cleans better and avoids secondary damage like leaks at the tub gasket or strain on the pump. The manual also emphasizes basic safety steps like disconnecting electrical power before servicing.
Last updated: February 2026
How do I find the model number on my 58715248700?
On Kenmore dishwasher model 58715248700, the model number is printed on the model and serial number label on the dishwasher. Open the door and look around the inner door frame or tub opening where the label is easy to read when the door is open.
Where to look on the dishwasher
Check these common label locations first:
- Along the left or right inner door frame
- On the top edge of the tub opening (visible with the door open)
- On the inner edge of the door itself
- Near the latch area on the tub frame
What you should see on the label
The label typically includes both the model and serial number. For this Kenmore series, the model number format often starts with 587. and then continues with more digits.
| Label item | What it’s used for | Example format |
|---|---|---|
| Model number | Matching parts and diagrams | 587.1524xxx |
| Serial number | Identifying production run | Letters and numbers |
| Purchase date (optional) | Warranty records | Date you wrote in |
Tips to avoid mix-ups when ordering parts
Using the exact model number from the label prevents ordering the wrong door seal, drain pump, or rack parts.
- Write the model number exactly as shown (include all digits)
- If there is a dot (587.XXXX), record it as printed
- Use the full model number when looking up parts like the dishwasher door seal 809006501
- Keep a photo of the label on your phone for quick reference
Why it matters
Kenmore dishwashers share similar designs across multiple model families; the full model number ensures the correct fit for components like the door latch, water inlet valve, and spray arm.
For diagrams and the official label location illustration, use the 58715248700 owner's manual.
Last updated: March 2026





