Kenmore Elite 79571069010 refrigerator Parts

Common problems on the Kenmore Elite 79571069010 bottom-mount refrigerator include weak or uneven cooling, ice maker and dispenser issues, water leaks from a clogged drain, lights not working, and vibration or rattling. Many fixes start with cleaning, leveling, and checking airflow; use the owner's manual troubleshooting section for model-specific checks.

Most common symptoms and what usually causes them

• Not cooling well: dirty condenser coils, blocked vents, or an evaporator fan problem
• Ice maker not making ice: ice bin not seated or ice compartment door not closed tightly; ice can mound and “trick” the level sensor
• Water puddles or leaks: defrost drain restriction; drain tube issues
• Lights do not work: loose bulb, burned-out bulb, or power supply issue
• Vibration or rattling: refrigerator not level, weak/uneven floor, or leveling legs need adjustment

Quick checks we recommend before replacing parts

1. Confirm temperatures: set fresh food near 37°F and freezer near 0°F; allow 24 hours to stabilize after changes.
2. Clean condenser coils: dusty coils can cause long run times and warm temps.
3. Check doors and airflow: make sure gaskets seal and vents are not blocked by food.
4. Inspect the ice bin and ice door: keep the ice compartment door closed tightly; level the ice in the bin if it piles up.
5. Look for drain backups: if you see water under crispers or on the freezer floor, suspect a drain restriction.

Parts that commonly relate to these problems (for this model)

Symptom	Part to consider	What it affects
No ice or dispenser issues	Refrigerator ice maker assembly AEQ73110205	Ice production and harvest
Warm temps, poor airflow	Lg refrigerator evaporator fan motor 4681JB1027C	Circulates cold air
No water to dispenser/ice	Lg refrigerator water inlet valve AJU72992601	Water supply into refrigerator
Water leaks inside	Refrigerator drain tube 5251JA3003D	Routes defrost water to drain pan

Why it matters

Cooling, ice, and leak complaints often share the same root causes: restricted airflow, poor heat removal at the condenser, or water not draining during defrost. Addressing those basics first prevents repeat failures and unnecessary part replacement.

Last updated: January 2026

On Kenmore Elite refrigerator model 79571069010, water leaking from the bottom is usually caused by a defrost drain problem (water cannot reach the drain pan), a leak in the dispenser water line, or a water supply connection that is dripping behind the unit. Use the 79571069010 owner's manual to locate access points and cleaning steps.

Most common causes to check first

• Clogged defrost drain: Meltwater backs up and spills into the fresh food section, then runs down and out.
• Cracked or loose water tubing: A small split can drip and track to the front or bottom.
• Leaking water line connection: Compression nut or ferrule connection can seep after installation or movement.
• Ice maker fill or dispenser leak: Water can leak only during fill cycles.

Quick troubleshooting steps (safe, no special tools)

1. Unplug the refrigerator and pull it out enough to inspect the back.
2. Look for drip trails: follow water marks from the water inlet area down to the floor.
3. Check the house water shutoff and fittings: tighten gently if you see moisture.
4. Inspect the tubing for kinks or rub points and make sure it is not vibrating against the cabinet.
5. Clear the defrost drain area (common fix): remove items, check for ice buildup, and flush with warm water if accessible.

Parts that commonly solve bottom leaks on this model

If you find a damaged line or a connection that will not seal, these model-matched parts are common fixes:

• Refrigerator water tubing MJU62070602 (for cracked or leaking internal tubing)
• Lg refrigerator water inlet valve AJU72992601 (for seepage at the valve body or fittings)
• Refrigerator drain tube 5251JA3003D (if the drain outlet is damaged or not routing water correctly)

What you see	Most likely source	Best next step
Water appears after a defrost cycle	Defrost drain backup	Clear/flush drain path and check for ice
Water only when dispensing or making ice	Tubing or inlet valve leak	Inspect tubing and valve fittings for drips
Water behind unit near wall	Supply line connection	Re-seat/tighten compression nut and ferrule

Why it matters

A small leak can quickly lead to floor damage and can also cause ice buildup inside the freezer if defrost water cannot drain properly. Fixing the root cause also helps prevent repeat puddles.

Last updated: January 2026

Kenmore Elite refrigerator model 79571069010 is in the 795.7106* bottom-mount family; the exact exterior width, height, depth, and required clearances are listed in the installation section of the 79571069010 owner's manual. Use those published dimensions for cabinet fit, not just a tape-measure estimate.

How we recommend confirming the exact size (fast and accurate)

• Find the model tag inside the fresh food compartment and confirm it reads 79571069010.
• In the 79571069010 owner's manual, go to “Refrigerator Installation” for:
  • overall dimensions (W x H x D)
  • depth with handles and doors (if listed)
  • minimum side, top, and rear clearances
• Measure your opening in three places (front, middle, back) to catch out-of-square cabinets.
• Plan for door swing and freezer drawer pull-out clearance, not just the cabinet box.

What “size” can mean (use the right measurement)

If you need…	Use this measurement	Why it matters
Cabinet fit	Overall width and height	Prevents trimming cabinets or hitting soffits
Walkway clearance	Depth with handles/doors	Avoids blocking aisles and door swing
Ventilation	Minimum clearances	Helps cooling performance and reduces noise

Why it matters

A refrigerator can be the right capacity but still be the wrong fit. Using the published dimensions and clearances prevents common install problems like doors rubbing walls, drawers not opening fully, and restricted airflow behind the unit.

Related part planning (if you are pulling the unit out)

If you disconnect the water line to move the refrigerator, it is a good time to replace the filter and flush the system afterward. For this model, a common replacement is the genuine Kenmore refrigerator water filter 9690 AGF80300801.

Last updated: January 2026