Kenmore 11049722990 washer Parts

Kenmore model numbers are read left to right: the first 3 digits identify the original manufacturer, and the remaining digits identify the specific product series and configuration. For your Kenmore washer model 11049722990, the 110 prefix indicates a Whirlpool-built Kenmore platform.

Where to find the model number on a Kenmore washer

Most Kenmore washers place the model and serial tag in one of these spots:

• Under the lid (top-load models), around the tub opening
• On the rim of the washer opening
• On the back panel
• Inside the cabinet near the frame (less common)

How the number breaks down (what each part tells you)

Kenmore model numbers typically follow this pattern:

• Prefix (first 3 digits): who built it for Kenmore
• Middle digits: platform or series family
• Last digits: feature set, revision, or production variation

Common Kenmore manufacturer prefixes (examples)

Prefix	Common manufacturer	What it means for parts
110	Whirlpool	Many parts cross to Whirlpool-style components
417	Frigidaire/Electrolux	Often uses Frigidaire-style washer parts
796	LG	Often uses LG-style washer parts
665	Whirlpool	Common on dishwashers

Why it matters when ordering parts

Using the full model number prevents mismatches because Kenmore sold many similar-looking washers with different pumps, hoses, clamps, and hardware. When you shop parts for 11049722990, match by model first, then confirm by part ID.

If you are troubleshooting fill or water-level issues on this model family, the water-level pressure system is a common place to check; the hose-wl WP353244 is one of the related components listed for this washer.

Last updated: February 2026

The exact cubic-feet capacity for Kenmore washer model 11049722990 varies by the specific tub and basket configuration used on that series; most Kenmore 110 top-load washers of this era typically fall in the about 3.2 to 3.5 cu. ft. range (often described as “super capacity”).

Quick way to estimate capacity (measuring method)

If you want a solid capacity estimate without a spec sheet, we use the standard tub-volume method:

• Unplug the washer for safety.
• Measure the inside tub diameter (in inches), wall to wall.
• Measure the usable tub depth (in inches), from the bottom to the highest fill line you consider usable.
• Convert inches to feet (divide by 12).
• Calculate: capacity (cu. ft.) = π × (radius in feet)² × (depth in feet).

Example calculation table

Measurement	What to measure	Example only
Tub diameter	Inside wall to inside wall	20 in
Radius	Diameter ÷ 2	10 in
Usable depth	Bottom to usable fill height	16 in
Estimated capacity	π × r² × depth	~2.9 cu. ft.

What capacity range to expect for Kenmore 110 washers

For Kenmore 110-series top-load washers, capacity commonly lands in these buckets:

• ~3.2 cu. ft.: many “super capacity” direct-drive style units
• ~3.5 cu. ft.: larger standard top-load tubs
• 4.0+ cu. ft.: typically newer high-capacity designs

Why it matters

Capacity affects how much laundry you can wash per load, how much water the washer uses, and how likely you are to see out-of-balance issues when bulky items (blankets, towels) are overloaded.

Related repair clue (when capacity questions come from fill problems)

If you are asking about capacity because the washer is overfilling or underfilling, the water-level system is a common place to check. On this model’s parts list, the water-level pressure hose is a frequent culprit when it’s loose, kinked, or leaking air: hose-wl WP353244.

Last updated: February 2026

A Kenmore washer typically lasts 10 to 15 years. For your Kenmore model 11049722990, lifespan depends most on load size, how often it runs, and whether water leaks or drain issues are fixed quickly.

Typical lifespan and what changes it

Most washers land in this range, but real-world life varies based on a few predictable factors:

• Heavy weekly use (large households) shortens life faster than light use
• Overloading stresses the drive system, suspension, and tub bearings
• Poor draining (slow drain, siphoning, clogs) overworks the pump and can cause leaks
• Hard water increases mineral buildup and can affect valves and hoses
• Routine cleaning (detergent residue, mildew) helps prevent odor and performance issues

Quick maintenance that helps you reach 10 to 15 years

These are the highest-impact habits we recommend for Kenmore washers:

• Use the right amount of HE detergent (too much causes residue and oversudsing)
• Keep loads balanced; avoid washing single heavy items by themselves
• Check fill and drain hoses for soft spots, cracks, or rubbing
• Leave the lid open between loads when possible to reduce moisture and odor
• Address small leaks immediately (a loose clamp or worn hose can become a bigger failure)

Common “end-of-life” symptoms vs. fixable problems

What you notice	Often means	Usually fixable?
Won’t drain or drains slowly	Drain restriction, hose issue, siphoning setup	Yes
Loud banging or walking	Unbalanced load, leveling, suspension wear	Often
Water on floor	Hose, clamp, coupling, or internal leak	Often
Burning smell or no spin	Drive or motor-related issue	Sometimes

If you’re chasing a leak or water-level problem, parts like the hose-wl WP353244 and clamps such as hose clamp WP3357331 are commonly involved in restoring normal operation.

Why it matters

Knowing the typical lifespan helps you decide whether to maintain, repair, or replace. If your 11049722990 is within the 10 to 15 year window, fixing a drain or hose issue is often the fastest way to extend service life and prevent water damage.

Last updated: February 2026