Samsung RF28K9070SR/AA-00 refrigerator Parts

Most Samsung refrigerators (including model RF28K9070SR) do not have a single dedicated “reset button.” Instead, you reset specific functions (like the control panel, ice maker, or filter indicator) using button combinations or by power-cycling; the exact steps are listed in the RF28K9070SR owner's manual.

Common ways to reset a Samsung refrigerator

Try the reset method that matches what is acting up:

• Control panel or display acting frozen: press and hold two front-panel buttons together for about 8 to 12 seconds until the display changes or chimes.
• After a power outage or surge: unplug the refrigerator (or switch off the breaker) for 2 to 5 minutes, then restore power.
• Ice maker not producing: use the ice maker’s test/reset function (often a small button on the ice maker module) and confirm the ice bin is seated.
• Filter light won’t clear: use the filter reset sequence for your dispenser controls.
• Cooling seems off after changes: wait 24 hours after adjusting temperature settings before judging results.

Which reset should I use? (quick guide)

Symptom	Best reset to try first	What it affects
Display unresponsive	Control panel button reset	User interface and controls
No ice or slow ice	Ice maker test/reset	Ice maker cycle and diagnostics
Filter indicator on	Filter reset sequence	Filter status light only
Odd behavior after outage	Power-cycle reset	Main control reboot

Why it matters

A “reset” on RF28K9070SR usually clears a stuck control state or restarts a specific feature; it does not fix underlying issues like low water pressure, a failed fan motor, or a bad sensor. If the problem returns quickly, troubleshooting the system involved saves time and prevents repeat shutdowns.

If the issue comes back after resetting

These checks pinpoint the most common causes:

• Confirm the refrigerator is getting steady power and the outlet is not controlled by a switch.
• Verify doors close fully and gaskets seal (warm air can trigger erratic temps and ice issues).
• If ice or water is affected, confirm the house shutoff valve is fully open and the supply line is not kinked.
• Watch for error codes and use a Samsung error code reference such as Samsung rb series bottom freezer refrigerator error codes to interpret patterns.

Last updated: February 2026

Common problems we see with the Samsung RF28K9070SR refrigerator include ice maker issues (no ice or no dispense), warm fresh food temperatures, leaks, unusual noise, doors that do not seal or swing correctly, and occasional overcooling (freezing in the refrigerator section). For model-specific operating checks and control settings, use the RF28K9070SR owner's manual.

Most common symptoms and what they usually point to

• Ice maker not making ice: water supply issue, frozen fill tube, or ice maker/ice path problem
• Ice not dispensing: jammed ice bucket, auger drive issue, or dispenser control problem
• Refrigerator too warm: airflow restriction, evaporator fan issue, or temperature sensor problem
• Leaking water: water line connection, inlet valve seepage, or defrost drain issue
• Noisy operation: fan blade rubbing ice, condenser fan noise, or compressor start components
• Door won’t close/seal: hinge alignment, gasket not sealing, or bins/shelves obstructing

Quick checks we recommend before replacing parts

1. Confirm temperature settings and allow 24 hours after changes for temperatures to stabilize.
2. Make sure vents inside the fresh food section are not blocked by food packages.
3. Check the ice bucket for clumps; dump old ice and dry the bin.
4. Inspect door closing: level the cabinet, remove obstructions, and verify the door seals all the way around.
5. If you hear a new buzzing or grinding, listen for whether it is coming from the freezer (evaporator area) or the back (condenser area).

Parts that commonly relate to these problems on this model

Symptom	Common part area	Example part for RF28K9070SR
Warm fridge, poor airflow	Evaporator airflow	Refrigerator evaporator fan motor DA31-00287B
Leaking or no water to ice maker	Water supply control	Refrigerator water inlet valve DA62-04027A
Temperature swings	Sensing/control	Refrigerator temperature sensor DA32-10104N

Why it matters

Catching airflow, water supply, and door-seal problems early helps prevent food spoilage, ice buildup, and extra strain on the compressor and fans. That typically reduces repeat failures and keeps temperatures stable.

For display messages and diagnostic codes that can help narrow the cause, use our Samsung rb series bottom freezer refrigerator error codes guide.

Last updated: February 2026

For the Samsung RF28K9070SR refrigerator, the overall size is 35 3/4 in. wide x 71 7/8 in. high x 34 1/4 in. deep when measured with hinges, handles, and doors installed. Use the RF28K9070SR owner's manual for the exact measurement method and clearance guidance.

Dimension breakdown (common measurement points)

Use these when planning a delivery path, cabinet opening, or door swing space:

• With hinges, handles, and doors: 35 3/4 in. W x 71 7/8 in. H x 34 1/4 in. D
• Without hinges and doors: 35 3/4 in. W x 70 3/4 in. H x 29 3/8 in. D
• With hinges and doors, no handle: 35 3/4 in. W x 71 7/8 in. H x 34 1/4 in. D
• Plan extra space behind the unit for the water line and power cord
• If you are tight on depth, measure to the front edge of the doors (not just the cabinet box)

Quick reference table

Measurement style	Width	Height	Depth
With hinges, handles, doors	35 3/4 in.	71 7/8 in.	34 1/4 in.
Without hinges and doors	35 3/4 in.	70 3/4 in.	29 3/8 in.
With hinges and doors, no handle	35 3/4 in.	71 7/8 in.	34 1/4 in.

Why it matters

Refrigerator dimensions affect more than fit in the opening; they also impact door clearance, airflow around the condenser area, and whether the unit can be moved through hallways without removing doors.

If you are also troubleshooting cooling or airflow issues after installation, check that the toe grille is installed and unobstructed; the refrigerator toe grille DA97-12749B helps protect the lower air path.

Last updated: February 2026

A bottom-freezer refrigerator typically lasts 13 years. For your Samsung RF28K9070SR, you can usually reach that lifespan (or longer) with steady temperature control, clean airflow at the condenser area, and prompt repair of cooling, ice maker, or water-leak symptoms.

Typical lifespan and what affects it

Most bottom-mount (bottom-freezer) fridges land in the same general range, but real-world life depends on usage and maintenance.

• Typical lifespan: 13 years
• Common real-life range: 10 to 15 years
• Biggest life drivers: compressor run time, condenser cleanliness, door seal condition, and defrost performance
• High-use features: ice maker and dispenser systems can need service earlier than the sealed cooling system

What to do to help your RF28K9070SR reach 13 years

Use these habits to reduce compressor strain and prevent airflow and icing problems.

• Keep freezer at 0°F and fresh food at 37°F (avoid “colder is better”).
• Clean dust from the condenser area and make sure the condenser fan can move air.
• Leave space around the cabinet for ventilation (especially behind and below).
• Keep door gaskets clean and sealing flat; fix gaps quickly.
• Replace water filters on schedule to protect the water system and ice maker.
• Address unusual noises, warming temps, or heavy frost early using the RF28K9070SR manual.

Quick “repair vs. replace” guide

Use this as a practical decision tool when the fridge is aging.

Fridge age	Typical approach	Why
0 to 5 years	Repair	Parts and labor usually restore full life
6 to 10 years	Repair most issues	Good chance of several more years
11 to 15 years	Case-by-case	Major cooling repairs can be less cost-effective
16+ years	Replace	Efficiency and reliability typically drop

Why it matters

A bottom-freezer fridge that is running warm, frosting up, or struggling to make ice forces the compressor and fans to run longer. That extra run time is what shortens lifespan and increases the chance of a major cooling failure.

Last updated: February 2026