Kenmore 25379132990 top-mount refrigerator Parts

The freezer capacity (cubic feet) for Kenmore top-mount refrigerator model 25379132990 is listed in the product specifications section of the 25379132990 owner's manual. If you are trying to confirm usable space, measure the interior and compare it to typical top-freezer ranges (about 4 to 6 cu. ft. for many full-size units).

In the 25379132990 owner's manual, look for sections labeled Specifications, Features, or Product data. Capacity is often shown as:

• Total refrigerator capacity (cu. ft.)
• Freezer capacity (cu. ft.)
• Fresh food capacity (cu. ft.)
• Electrical rating and other specs

If you need a practical estimate for bins, shelves, or storage planning, you can approximate interior volume:

• Measure width x depth x height of the freezer interior (in inches)
• Multiply to get cubic inches
• Divide by 1,728 to convert to cubic feet
• Subtract about 10% to 20% for shelves, ducts, and the ice maker area

Freezer cubic feet affects how much food you can store and whether accessories like an ice maker bucket, shelf, or door bin will fit without blocking airflow. Good airflow helps prevent warm spots and frost buildup.

Last updated: January 2026

Kenmore is a brand name, and model 25379132990 was manufactured for Kenmore by Frigidaire (Electrolux/Frigidaire). The most reliable way to confirm the original manufacturer is to check the model and serial tag location shown in the 25379132990 owner's manual.

We recommend verifying using the identification label inside the fresh food compartment.

• Open the refrigerator door and look inside the refrigerator compartment
• Check the top left wall for the serial plate (model and serial information)
• Write down the full model number and serial number exactly as shown
• Match the 253 prefix to the manufacturer code used for Kenmore refrigerators

Kenmore does not build most appliances; Kenmore contracts manufacturing to major brands. That is why two Kenmore refrigerators can use different parts, wiring, and service procedures even if they look similar.

If you are diagnosing an ice maker issue on this Kenmore 253 platform, a common ice maker component listed for this model is the Ice maker mold 241798231.

Using the correct manufacturer platform prevents wrong-part returns and speeds up repairs, especially for sealed system, thermostat, evaporator fan, and ice maker components.

Last updated: January 2026

Common problems we see on Kenmore refrigerators like model 25379132990 include long run times (often from warm room conditions or frequent door openings), no ice production (water supply or ice maker shutoff issues), and cooling problems tied to airflow or temperature control components. For model-specific operating checks, use the 25379132990 owner's manual.

• Refrigerator runs too much/too long: hot room, frequent door openings, or the door not sealing fully
• Ice maker not making ice: shutoff arm in OFF position, household water valve closed, or a blocked water supply connection
• Temperatures too warm or too cold: control settings out of range, door left slightly open, or airflow blocked by food packages
• Interior light not working: failed bulb or door switch
• No cooling at all: power issue, compressor start problem, or sealed system failure (typically requires a technician)

1. Confirm the refrigerator is getting power (house lights and outlet).
2. Make sure both doors close fully and the cabinet is level.
3. Reduce door openings for a few hours and recheck temperatures.
4. If the ice maker is installed, verify the wire shutoff arm is down (ON) and the household water valve is open.
5. Look for blocked vents inside the fresh food section and freezer.

Catching door seal, airflow, and ice maker water-supply issues early prevents temperature swings that can spoil food and also reduces excessive compressor run time.

Last updated: January 2026