Kenmore 10660522900 refrigerator Parts

For Kenmore refrigerator model 10660522900, we recommend 3 inches of clearance above the refrigerator cabinet (to overhead cabinets) for proper ventilation. This top space helps heat escape so the compressor and condenser can run efficiently; see the owner's manual.

Use these minimum spacing guidelines when installing the refrigerator:

• Top: 3 in. (7.5 cm) between overhead cabinets and the refrigerator top
• Sides: 1/2 in. (12.7 mm) on each side
• Back: at least 1 in. (25.4 mm) between the back of the cabinet and the wall
• Hinge side (next to a fixed wall): 2 in. (5.08 cm) minimum so the door can swing open
• If you have an ice maker: leave extra room behind the unit for the water line connection

Refrigerators shed heat through airflow around the cabinet. When the top or back is too tight, warm air gets trapped, which can cause longer run times, warmer temperatures, and extra wear on sealed system components like the compressor.

• Measure to the refrigerator cabinet, not the door handles.
• Confirm the cabinet is level before judging door swing and gaps.
• Keep the condenser area (rear and lower sections) free of dust and obstructions.
• If the refrigerator is tight under cabinets, consider adjusting placement to maintain the full 3-inch top gap.

If you need replacement installation-related parts (like rollers or door components), you can order model-specific parts from the list for 10660522900 or search by model on Sears PartsDirect.

Last updated: February 2026

Your Kenmore refrigerator model 10660522900 has a specific cubic-foot capacity listed on its rating plate (usually inside the fresh food compartment) and in the specifications section of the owner's manual. That rating plate value is the most accurate way to confirm capacity for your exact unit.

• Check the rating plate inside the refrigerator section (often on a side wall or near the crisper area); it typically lists capacity in cubic feet.
• Look in the specifications pages of the owner's manual for capacity and electrical requirements.
• Search by model number in the parts and documentation for 10660522900 if you are comparing versions or finishes.
• Measure and estimate only as a last resort; interior layouts (shelves, ice maker, ducts) make estimates inaccurate.

Common rating plate locations on Kenmore top-mount refrigerators include:

• Left or right interior wall of the fresh food compartment
• Behind or beside the crisper drawers
• Near the ceiling of the fresh food compartment
• On the cabinet frame behind the door (hinge side)

Cubic feet is the refrigerator’s total storage volume. Knowing it helps you match replacement appliances, compare energy use, and understand why adding options like an ice maker can reduce usable space.

If you are checking capacity because storage parts are missing or broken (bins, shelves, drawers), you can order model-matched replacements from the parts list for 10660522900, or search more broadly on Sears PartsDirect.

Last updated: February 2026

Kenmore model numbers are read left to right; the first three digits identify the manufacturer, and the remaining digits narrow down the exact design and version. For your Kenmore refrigerator model 10660522900, the 106 prefix is the key that ties your unit to the correct parts list and service information in the owner's manual.

When we decode a Kenmore model number, we use it to match the right diagrams, parts, and troubleshooting steps.

• Prefix (first 3 digits): identifies the manufacturer family (example: 106)
• Middle digits: identify the base platform and feature set
• Last digits: identify production variations (revisions, color packages, minor design changes)
• Full model number matters: use all digits when ordering parts or checking fit

On most Kenmore top-mount refrigerators, the model/serial tag is typically found in one of these spots:

• Inside the fresh food compartment on a side wall
• On the ceiling of the fresh food compartment near the light
• Along the door frame (hinge side)
• Behind the lower toe grille (less common)

Once you have the full model number, match it exactly to avoid ordering the wrong component.

If you are replacing a common wear item, we match it to your model’s parts list; for example, a door seal issue often points to a gasket such as the refrigerator gasket panel (white) WP2319265T.

Kenmore model numbers often look similar across different refrigerators, but small suffix differences can change shelves, door bins, ice maker style, or electrical components. Using the complete 10660522900 model number keeps the repair accurate and avoids returns.

Last updated: February 2026

For Kenmore refrigerator model 10660522900, the correct water filter is the one specified for that exact model in the 10660522900 owner's manual. Kenmore uses several different filter styles across model families, so matching by model number (not by fridge size or door style) is the reliable way to get the right fit.

We recommend using these checks in order:

• Confirm the model number 10660522900 on the rating label inside the fresh food compartment.
• Check the filter location (inside the refrigerator compartment, in the base grille, or in-line on the water line).
• Look for the old filter’s printed number and compare it to the manual’s accessory listing.
• If the filter is missing, use the manual’s filter replacement section and diagrams to match the housing style.
• If you have an ice maker and water dispenser, replace the filter first when flow is slow or ice is hollow.

Kenmore filters are often sold under different numbers depending on the supplier, but they fall into a few common families. Use this as a quick reference, then confirm the exact match in the manual.

Using the correct filter for 10660522900 prevents leaks, low water flow, and poor ice maker performance. It also helps keep water pressure within the refrigerator’s operating needs; the manual notes typical supply pressure requirements for proper operation.

• If you are troubleshooting dispenser or ice issues after a filter change, use how to prevent water dispenser and ice maker problems.
• If you need other replacement parts for this model (like an ice maker or door gasket), order from the parts list for 10660522900 or search by model on Sears PartsDirect.

Last updated: February 2026

On a Kenmore top-mount refrigerator like model 10660522900, the upper compartment is the freezer. It is the section designed to keep foods frozen, and it also supplies cold air that circulates to help cool the fresh food (refrigerator) compartment.

• Freezer shelf (on many top-mount designs)
• Air vents that move cold air through both compartments
• Ice maker area (if your refrigerator is equipped with an ice maker)
• Freezer door bins or rails (varies by configuration)

In this Kenmore design, cold air movement between the freezer and refrigerator sections is essential for stable temperatures. If packages block the freezer vents, airflow gets restricted and you can end up with warm spots, frost buildup, or moisture issues.

• Keep freezer vents clear; do not pack food tightly against vent openings
• Let the refrigerator cool for 24 hours after installation before loading it with food
• Use the temperature control as intended; it controls cooling for both compartments
• Wrap foods tightly to reduce odor transfer between freezer and refrigerator sections

If you are troubleshooting cooling or airflow issues, these model-matched parts are commonly involved:

• Evaporator motor WPW10188389 (moves air across the evaporator and through vents)
• Refrigerator evaporator fan blade WP2169142 (fan blade that helps push air)
• Refrigerator defrost heater WP2263749 (helps prevent heavy frost that can block airflow)

For diagrams, feature names, and control location details for Kenmore 10660522900, use the owner's manual. If you need to order replacement parts, use the parts list for this model or search by model number on Sears PartsDirect.

Last updated: February 2026