Kenmore 36316222100 dishwasher Parts

Your Kenmore dishwasher model number is on the serial plate fastened to the tub wall just inside the dishwasher door. For Kenmore model 36316222100, that plate lists both the model and serial number, which you need to match the correct parts and troubleshooting info.

Where to look (fastest checks first)

• Open the door and look at the tub wall just inside the door opening (most common location).
• Check the left or right inner tub wall near the front edge.
• Look for a sticker or metal serial plate with “MODEL NUMBER” and “SERIAL NUMBER.”
• Wipe the area with a damp cloth; grease and detergent film can hide the print.
• Write the number down exactly as shown (all digits, no spaces).

What the model number helps you do

Having the exact model number lets us match the right Kenmore dishwasher parts and diagrams, such as the correct racks, seals, and wash system components.

What you’re doing	Why the model number matters	Example part for this model
Replacing a leaking door seal	Seal profiles vary by model	Gasket WD08X10057
Fixing poor wash or no circulation	Pump and motor assemblies differ	Mechanism WD26X10013
Solving draining problems	Hose routing and fittings vary	Dishwasher drain hose WD24X10014
Looking up operating steps and features	Cycles and dispenser use are model-specific	Owner's manual

Why it matters

Dishwashers can look identical across multiple Kenmore series, but small design changes affect fit and function. Using the exact model number prevents ordering the wrong spray arm, rack, or door seal and helps you troubleshoot faster.

Ordering parts once you have the model number

After you confirm the model number, you can order replacement parts for Kenmore 36316222100 from the parts list for this model, or search by model number on Sears PartsDirect.

Last updated: February 2026

Yes. You can still get replacement parts for a Kenmore dishwasher, including model 36316222100, by matching the exact model number to the correct parts list and diagrams. Commonly replaced items include door seals, spray arms, racks, and drain components; confirm fitment in the owner's manual.

How to make sure you get the right part

Use the model number 36316222100 first, then match the part by name and ID. This prevents ordering a look-alike part that mounts differently or uses different hose connections.

• Find the model and serial plate on the tub wall just inside the dishwasher door (per the manual)
• Compare the part name and part ID, not just the photo
• If you are fixing a leak, replace seals and clamps at the same time
• If you are fixing poor cleaning, check spray arms and rack loading first
• If you are fixing a drain issue, inspect the drain hose routing and air gap (if installed)

Parts we commonly see customers replace on 36316222100

Here are examples of parts available for this model that cover frequent repairs:

Symptom	Part to check	Example part for this model
Water leaking at the door	Door seal or seal insert	Gasket WD08X10057, dishwasher door seal insert WD08X10015
Not draining or slow drain	Drain hose, drain solenoid	Dishwasher drain hose WD24X10014, dishwasher drain solenoid kit WD21X10060
Poor wash coverage	Spray arm	Spray arm WD22X155
Rack won’t roll smoothly	Rack rollers	Rack roller WD12X271

Why it matters

Kenmore dishwashers were built by multiple manufacturers over the years, so “Kenmore dishwasher parts” is not specific enough. Using 36316222100 ensures the pump, motor, racks, and seals you buy are designed to fit your tub, door, and mounting points.

Where to buy

We list model-matched replacement parts for Kenmore 36316222100 on this parts page. If you are searching beyond the parts shown here, use Sears PartsDirect and search by model number.

Last updated: February 2026

On the Kenmore 36316222100 dishwasher, you remove the lower spray arm by pulling out the lower rack, then releasing the spray arm from its center mount (typically a twist-off nut or a snap-on retainer) and lifting the arm straight up. Use the 36316222100 owner's manual for the exact mounting style.

Before you start (safety and prep)

• Turn off power at the breaker; this prevents the dishwasher from starting while your hands are inside.
• Let the heating area cool before reaching into the tub.
• Pull the lower rack fully out and lift it off the rails if needed for space.
• Remove any loose items that could drop into the sump area.
• Keep track of small retainers or washers so the spray arm sits level when reinstalled.

Removal steps (most common setups)

1. Remove the lower rack to expose the lower spray arm and wash tower area.
2. Inspect the center hub of the spray arm:
   • If you see a plastic nut, turn it counterclockwise to remove.
   • If you see a locking tab/retainer, press the tab and lift the spray arm off.
3. Lift the spray arm straight up.
4. Check the spray arm ports for debris; rinse under hot water and clear holes with a toothpick if needed.

If the spray arm is stuck

• Rock the spray arm gently side-to-side while lifting.
• If mineral buildup is present, soak the spray arm in warm water and vinegar, then try again.
• If the hub is cracked or warped, replace the spray arm so it spins freely (a common cause of poor cleaning).

Parts that are commonly involved

Symptom	What to inspect	Example part for this model
Poor cleaning, arm not spinning	Clogged or damaged spray arm	Spray arm WD22X155
Weak spray, unusual wash noise	Circulation pump issues	Mechanism WD26X10013
Dishes gritty after cycles	Drain performance and hose routing	Dishwasher drain hose WD24X10014

Why it matters

The lower spray arm is the main source of wash action for the bottom rack. If it is installed crooked, clogged, or not locked onto the hub correctly, water circulation drops and you can see stuck-on soil, detergent not dissolving, or items staying dirty.

You can order replacement parts for Kenmore 36316222100 from the parts list for this model, or search by model number on Sears PartsDirect.

Last updated: February 2026

Yes; for Kenmore dishwasher model 36316222100, repairing is worth it when the issue is a single, targeted failure (leak, drain problem, worn rack parts). Replacement makes more sense when multiple major systems fail or the repair total reaches about half the cost of a new dishwasher.

Quick decision checklist

Use these checkpoints to decide fast:

• Age: Under 10 years old is typically worth repairing; over 10 years old depends on overall condition.
• Cost rule: Repair is the better value when the total is under ~50% of replacement cost.
• Symptom count: One clear symptom is a good repair candidate; multiple unrelated symptoms usually are not.
• Leak location: Door and hose leaks are usually straightforward; tub damage is a bigger decision.
• Safety basics: Disconnect power before service; follow the safety and troubleshooting sections in the owner's manual.

Repairs that are usually worth it on this model

These common fixes often restore performance without major teardown:

• Door leak: replace the gasket WD08X10057
• Drain leak or poor draining: replace the dishwasher drain hose WD24X10014
• Poor cleaning from a worn wash arm: replace the spray arm WD22X155
• Rack problems (binding, falling off track): replace rollers or rack components

When replacement starts to win

Major component failures can be repaired, but the math changes quickly.

Situation	What it usually means	Best next step
Pump or motor failure	Higher parts cost, more labor	Get a firm diagnosis and estimate first
Repeated no-start or electrical issues	Intermittent troubleshooting time	Repair only with a confirmed failed part
Multiple leaks plus poor washing	Several worn seals/components	Price out all parts together before committing

Why it matters

A good repair fixes one known root cause and restores reliability. Chasing several symptoms often costs more than it returns in performance and lifespan.

You can order replacement parts from the parts list for model 36316222100, or search by model number on Sears PartsDirect.

Last updated: February 2026