Kenmore Elite 79631463410 washer Parts

On the Kenmore Elite washer model 79631463410, the model and serial number are printed on an identification plate located inside the washer lid. Use that exact model number any time you order parts or contact service; it ensures you get the correct Kenmore Elite washer parts for your unit.

Where to look (fast checklist)

• Open the washer lid fully and look along the underside of the lid.
• Check the rim of the tub opening near the lid opening.
• Look for a sticker or metal plate that lists Model and Serial.
• Wipe dust or detergent residue off the label so the numbers are readable.
• Write the numbers down or take a clear photo for future reference.

What to record (and why)

The identification plate typically includes both the model and serial number. We recommend recording these in your paperwork and keeping them handy.

Item	Example format	What it’s used for
Model number	79631463410	Matching parts and diagrams to your exact washer
Serial number	Letters and numbers	Verifying production details for service and support

Why it matters

Kenmore Elite washers often have multiple versions that look similar. Using the exact model number helps you avoid ordering the wrong items like a washplate, drain pump assembly, or water inlet valve.

Helpful reference

• Use the label location details shown in the 79631463410 owner's manual.

Last updated: January 2026

Yes. On the Kenmore Elite washer model 79631463410, the main user-maintenance “filter” is the drain pump clean-out (coin trap) that catches lint, hair, and small items before they reach the drain pump. We also recommend checking the inlet hose screens if you have slow filling.

Where the filter is and what it does

Most Kenmore Elite washers like 79631463410 use a drain pump clean-out that protects the drain pump from debris.

• It traps coins, buttons, and lint that can cause drain problems
• It helps prevent “won’t drain” symptoms and standing water
• It reduces strain on the drain pump during the drain cycle
• It is a routine maintenance item, not a one-time repair

For the exact access location and steps for your washer, follow the maintenance section in the 79631463410 owner's manual.

How to clean it safely (quick checklist)

• Unplug the washer (or switch off the breaker)
• Have a shallow pan and towels ready for water
• Open the access area and slowly loosen the clean-out cap
• Remove debris and rinse the trap clean
• Reinstall the cap firmly, then run a quick rinse and drain to check for leaks

If you have draining issues after cleaning

If the washer still will not drain or you hear loud humming/grinding from the pump area, the drain pump or drain hose can be restricted or failing.

Symptom	Most common cause	What to check next
Water left in tub	Clogged trap or pump	Clean trap; inspect pump inlet
Slow drain	Kinked or restricted hose	Inspect routing and standpipe
Loud pump noise	Debris in pump or worn pump	Check impeller area; replace pump if needed

Model-matched parts that commonly apply to drain problems include the washer drain pump assembly 5859EA1004P and the washer drain hose AEM73732901.

Why it matters

A clogged drain clean-out is one of the most common causes of Kenmore washer drain problems. Cleaning it regularly helps prevent no-drain errors, reduces odors from trapped debris, and can extend drain pump life.

Last updated: January 2026

Yes. Kenmore Elite is Kenmore’s premium appliance line, and the Kenmore Elite washer model 79631463410 is built with higher-end features and materials than standard Kenmore models, such as an ultra-capacity stainless steel tub, a soft-close tempered glass lid, and a front touch panel designed to be water resistant (see the 79631463410 owner's manual).

What “high end” means for this washer

On this model, “Elite” typically shows up as premium convenience, durability, and performance-focused design.

• Ultra-capacity stainless steel tub for durability
• Soft-close, tempered glass lid for quieter operation
• Front touch panel designed to resist water exposure
• SmartRinse jet spray rinse system in Normal and Heavy Duty cycles
• Kenmore Connect capability to transmit diagnostic data by phone when troubleshooting

Feature snapshot (Kenmore Elite 79631463410)

Feature	What it does	Why it matters
Stainless steel tub	Resists rust and wear	Helps the washer hold up over years of use
Soft-close lid	Closes gently and quietly	Reduces slamming and day-to-day noise
Front touch panel	Easier access than rear controls	More convenient, less reaching over the tub
SmartRinse	Uses a jet spray rinse in select cycles	Helps reduce rinse water use
Kenmore Connect	Sends data for faster diagnosis	Speeds up troubleshooting when issues occur

How to tell if it’s “high end enough” for your needs

Use these quick checks when comparing to other washers:

• Capacity: larger tubs handle bulky loads more easily
• Controls: front touch panels and specialty cycles add convenience
• Noise and feel: soft-close lid and smoother operation matter day to day
• Diagnostics: built-in troubleshooting support can reduce downtime
• Repairability: common wear items (like a drain pump or inlet valve) are replaceable when needed

Why it matters

A “high-end” washer is about fewer compromises: better materials, more refined usability, and features that improve cleaning and efficiency. On the 79631463410, the stainless tub, premium lid design, and rinse and diagnostic features are the clearest signs you are in Kenmore’s upper tier.

Last updated: January 2026

To hard reset your Kenmore Elite washer model 79631463410, unplug it (or switch off the breaker) for 2 minutes, then restore power and press POWER to turn it back on; if the control needs a deeper reset, reselect the cycle and press START/PAUSE to restart operation per the 79631463410 owner's manual.

Hard reset steps (safe, works for most control glitches)

• Press POWER to turn the washer off.
• Unplug the washer (or turn off the dedicated breaker).
• Wait 2 minutes.
• Restore power.
• Press POWER, select a cycle, then press START/PAUSE.

If the washer is unresponsive after the reset

These checks address the most common reasons the control appears “dead” or won’t start.

• Confirm the outlet has power (try a lamp) and the cord is fully seated.
• If the control panel powered off due to inactivity, press POWER to wake it.
• Make sure the lid is closed; the washer will not run with the lid open.
• Turn both hot and cold faucets fully on.
• If the tub has water and the washer sits idle, it can auto-drain after a few minutes; restart the cycle afterward.

When a “reset” is really a fill or drain problem

If the washer won’t fill or drains poorly, resetting helps only temporarily. Use this quick guide.

Symptom	Most likely cause	What to do next
Won’t fill or fills slowly	Clogged inlet screens, kinked hoses, low water pressure	Clean inlet filters; straighten hoses
Won’t drain	Drain restriction or failing pump	Check drain hose routing; inspect pump
Stops mid-cycle	Power interruption or control canceled	Restore power; reselect cycle and press START/PAUSE

For fill issues, follow the inlet screen cleaning procedure in the 79631463410 owner's manual. If you find the washer is not draining and you hear unusual pump noise, the washer drain pump assembly 5859EA1004P is a common repair part for this model.

Why it matters

A hard reset clears temporary control logic faults after a power flicker or canceled cycle. If the same symptom returns, the washer is usually reacting to a real condition (lid open, water supply issue, clogged inlet filters, or a drain problem) that needs correction.

Last updated: January 2026