Kenmore Elite 79631463410 washer Parts

On the Kenmore Elite washer model 79631463410, the model and serial number are printed on an identification plate located inside the washer lid. Use that exact model number any time you order parts or contact service; it ensures you get the correct Kenmore Elite washer parts for your unit.

• Open the washer lid fully and look along the underside of the lid.
• Check the rim of the tub opening near the lid opening.
• Look for a sticker or metal plate that lists Model and Serial.
• Wipe dust or detergent residue off the label so the numbers are readable.
• Write the numbers down or take a clear photo for future reference.

The identification plate typically includes both the model and serial number. We recommend recording these in your paperwork and keeping them handy.

Kenmore Elite washers often have multiple versions that look similar. Using the exact model number helps you avoid ordering the wrong items like a washplate, drain pump assembly, or water inlet valve.

• Use the label location details shown in the 79631463410 owner's manual.

Last updated: January 2026

Yes. On the Kenmore Elite washer model 79631463410, the main user-maintenance “filter” is the drain pump clean-out (coin trap) that catches lint, hair, and small items before they reach the drain pump. We also recommend checking the inlet hose screens if you have slow filling.

Most Kenmore Elite washers like 79631463410 use a drain pump clean-out that protects the drain pump from debris.

• It traps coins, buttons, and lint that can cause drain problems
• It helps prevent “won’t drain” symptoms and standing water
• It reduces strain on the drain pump during the drain cycle
• It is a routine maintenance item, not a one-time repair

For the exact access location and steps for your washer, follow the maintenance section in the 79631463410 owner's manual.

• Unplug the washer (or switch off the breaker)
• Have a shallow pan and towels ready for water
• Open the access area and slowly loosen the clean-out cap
• Remove debris and rinse the trap clean
• Reinstall the cap firmly, then run a quick rinse and drain to check for leaks

If the washer still will not drain or you hear loud humming/grinding from the pump area, the drain pump or drain hose can be restricted or failing.

Model-matched parts that commonly apply to drain problems include the washer drain pump assembly 5859EA1004P and the washer drain hose AEM73732901.

A clogged drain clean-out is one of the most common causes of Kenmore washer drain problems. Cleaning it regularly helps prevent no-drain errors, reduces odors from trapped debris, and can extend drain pump life.

Last updated: January 2026

Yes. Kenmore Elite is Kenmore’s premium appliance line, and the Kenmore Elite washer model 79631463410 is built with higher-end features and materials than standard Kenmore models, such as an ultra-capacity stainless steel tub, a soft-close tempered glass lid, and a front touch panel designed to be water resistant (see the 79631463410 owner's manual).

On this model, “Elite” typically shows up as premium convenience, durability, and performance-focused design.

• Ultra-capacity stainless steel tub for durability
• Soft-close, tempered glass lid for quieter operation
• Front touch panel designed to resist water exposure
• SmartRinse jet spray rinse system in Normal and Heavy Duty cycles
• Kenmore Connect capability to transmit diagnostic data by phone when troubleshooting

Use these quick checks when comparing to other washers:

• Capacity: larger tubs handle bulky loads more easily
• Controls: front touch panels and specialty cycles add convenience
• Noise and feel: soft-close lid and smoother operation matter day to day
• Diagnostics: built-in troubleshooting support can reduce downtime
• Repairability: common wear items (like a drain pump or inlet valve) are replaceable when needed

A “high-end” washer is about fewer compromises: better materials, more refined usability, and features that improve cleaning and efficiency. On the 79631463410, the stainless tub, premium lid design, and rinse and diagnostic features are the clearest signs you are in Kenmore’s upper tier.

Last updated: January 2026

To hard reset your Kenmore Elite washer model 79631463410, unplug it (or switch off the breaker) for 2 minutes, then restore power and press POWER to turn it back on; if the control needs a deeper reset, reselect the cycle and press START/PAUSE to restart operation per the 79631463410 owner's manual.

• Press POWER to turn the washer off.
• Unplug the washer (or turn off the dedicated breaker).
• Wait 2 minutes.
• Restore power.
• Press POWER, select a cycle, then press START/PAUSE.

These checks address the most common reasons the control appears “dead” or won’t start.

• Confirm the outlet has power (try a lamp) and the cord is fully seated.
• If the control panel powered off due to inactivity, press POWER to wake it.
• Make sure the lid is closed; the washer will not run with the lid open.
• Turn both hot and cold faucets fully on.
• If the tub has water and the washer sits idle, it can auto-drain after a few minutes; restart the cycle afterward.

If the washer won’t fill or drains poorly, resetting helps only temporarily. Use this quick guide.

For fill issues, follow the inlet screen cleaning procedure in the 79631463410 owner's manual. If you find the washer is not draining and you hear unusual pump noise, the washer drain pump assembly 5859EA1004P is a common repair part for this model.

A hard reset clears temporary control logic faults after a power flicker or canceled cycle. If the same symptom returns, the washer is usually reacting to a real condition (lid open, water supply issue, clogged inlet filters, or a drain problem) that needs correction.

Last updated: January 2026