Craftsman 917272420 lawn tractor Parts

The Craftsman lawn tractor model 917272420 uses a low-emission gasoline engine (electric start) designed to run a bit differently than older mower engines; the exact engine brand and horsepower are listed in the Product Specifications section of the 917272420 owner's manual.

Use these quick checks to match what you have on the tractor to the correct engine listing:

• Look for the engine ID label on the blower housing or valve cover (model, type, code).
• Compare the engine label to the Product Specifications section in the manual.
• Confirm whether your tractor is automatic and 42-inch mower deck equipped (both are called out in the manual).
• If the engine has been replaced, use the engine label, not the tractor model number.
• Record the serial number from the tractor frame for parts lookup consistency.

The manual notes this tractor has a low-emission engine that may behave differently than previously built engines. In practice, that usually means you should follow the starting and warm-up steps closely and keep up with tune-up items.

Knowing the exact engine model helps you buy the right maintenance parts (filters, spark plug, belts) and troubleshoot correctly. Many “no start” and “loss of power” complaints trace back to basic engine ID and routine service steps.

Last updated: February 2026

The Craftsman lawn tractor model 917272420 uses a Kohler CV492 engine; we fill the crankcase to the FULL mark on the dipstick (not to a fixed “ounces” number). For the exact oil type and fill procedure for your tractor, use the 917272420 owner's manual.

• Park the tractor on a level surface and let the engine cool.
• Remove the dipstick, wipe it clean, then reinsert fully and remove again to read the level.
• Add oil slowly in small amounts; recheck the dipstick each time.
• Stop when the oil reaches the FULL mark (do not overfill).
• Reinstall the dipstick securely before starting.

Many “20 oz.” oil-capacity answers apply to small walk-behind mower engines. A front-engine riding tractor like the Craftsman 917272420 typically holds significantly more oil than that, and the correct target is always the dipstick’s FULL mark.

Running low oil can damage the engine, and overfilling can cause smoking, fouled plugs, and leaks. Filling to the dipstick mark protects the Kohler CV492 lubrication system and keeps your tractor cutting reliably.

Last updated: February 2026

On the Craftsman lawn tractor model 917272420, the engine system is made up of fuel, air-intake, ignition, lubrication, exhaust, and control components that work together to start, run smoothly, and deliver power to the tractor and mower deck. For the exact component list and diagrams, use the 917272420 owner’s manual.

• Fuel system: stores and delivers gasoline (fuel tank, fuel cap, fuel line, clamps, filter, carburetor)
• Air intake: cleans and meters air (air cleaner cover/base, foam pre-cleaner, paper cartridge)
• Ignition: creates spark to fire the engine (spark plug, ignition coil, wiring)
• Lubrication: protects internal parts (engine oil, drain components, oil filter if equipped)
• Exhaust: routes hot gases safely (muffler, gasket, spark arrester if equipped)
• Controls and safety: lets you operate safely (throttle control, operator-presence and interlock circuits)

The manual’s engine parts breakdown for 917272420 lists items such as:

• Throttle control
• Fuel tank and vented fuel cap
• Fuel line and hose clamp
• Spark arrester (optional equipment)
• Muffler (example replacement: exhaust muffler 532159420)

Knowing the engine parts helps you troubleshoot faster and replace the right components. For example, the manual’s troubleshooting chart ties loss of power to issues like a dirty air filter, low or dirty oil, a faulty spark plug, stale fuel, or a clogged muffler.

Last updated: February 2026