Whirlpool UXT4030ADS2 range hood Parts

Whirlpool is a solid, widely trusted brand for range hoods, and the Whirlpool UXT4030ADS2 is a practical choice for everyday cooking ventilation. Most owners value Whirlpool hoods for dependable performance, straightforward controls, and easy-to-find replacement parts when normal wear items need service.

A good range hood clears smoke and odors, fits your cooking style, and stays easy to maintain over time. For many kitchens, Whirlpool under-cabinet hoods deliver a strong balance of value and reliability.

Common strengths customers look for:

• Consistent fan operation and simple speed selection
• Easy filter access for cleaning and replacement
• Readily available parts support (motors, switches, filters)
• Reasonable noise levels for the airflow produced
• Straightforward installation footprint for standard cabinets

Performance depends as much on setup as the brand. Use this quick checklist to judge whether a Whirlpool hood will meet your expectations.

One reason Whirlpool is a good brand choice is long-term serviceability. For the UXT4030ADS2, common maintenance and repair parts are available, such as the filter W10394517 and the range hood charcoal filter kit, 3-pack W10355450.

A range hood is only “good” if it keeps up with your cooking and stays maintainable. Whirlpool’s broad parts availability and straightforward designs help you keep airflow and lighting working without replacing the entire hood.

Last updated: February 2026

To identify your range hood model, find the rating label on the hood and read the model number exactly as printed. On Whirlpool hoods like model UXT4030ADS2, the label is commonly on the top of the hood, on the underside, or behind the grease filter.

Check these common spots first (use a flashlight):

• On the top of the range hood (often near the duct outlet)
• On the underside of the hood near the lights or fan opening
• Behind the grease filter (remove the filter and look on the inner frame)
• Inside the wiring or junction box area cover (only after power is off)
• Along the side wall inside the hood canopy

Copy the information exactly; one character off can pull the wrong parts list.

Use these practical checks to narrow it down and confirm the right parts:

• Compare your hood’s width (commonly 30-inch or 36-inch) to the cabinet opening
• Note whether it’s ducted (vented outside) or ductless (recirculating with charcoal filters)
• Match the control style (rocker switches vs. electronic controls)
• Match the filter style and latch style; for example, the range hood filter latch W10386347 is a common identifying feature
• If you already know it is UXT4030ADS2, use a known-fit part like the filter W10394517 to confirm you are on the correct parts list

The model number determines which Whirlpool parts fit your hood, including the fan motor, rocker switch, light cover, and charcoal filter kit. Using the exact model number helps avoid ordering a similar-looking part that mounts differently or uses different wiring.

Last updated: February 2026

On the Whirlpool range hood model UXT4030ADS2, replacing the filter is usually a quick, tool-free job: remove the old filter by releasing its latch or turning it to unlock (depending on filter style), then seat the new filter fully so it locks in place and sits flat.

• Turn the hood OFF and let the lights cool.
• If you will reach near wiring, switch power OFF at the breaker.
• Support the filter with one hand so it does not drop.
• Wipe grease from the filter area and fan cover before installing the new filter.

Most UXT4030ADS2 hoods use one of these common filter retention styles:

• Latch style (most common for mesh filters):

• Press or pull the latch to release.

• Tilt the filter down, then slide it out.

• Slide the new filter in, then push up until the latch clicks.

• Twist-lock style (common for charcoal filters):

• Grip the filter firmly.

• Turn counterclockwise to unlock.

• Lift off, then align the new filter and turn clockwise until it locks.

If your latch is broken or the filter will not stay seated, replace the latch: range hood filter latch W10386347.

Use this quick guide to match the filter type to your setup.

For a standard grease filter replacement, use: filter W10394517. For recirculating setups that use charcoal filtration, use: range hood charcoal filter kit, 3-pack W10355450.

A clogged or poorly seated range hood filter reduces airflow, increases noise, and lets grease build up on the fan motor and housing. Keeping the correct filter installed helps your Whirlpool range hood vent better and stay cleaner.

Last updated: February 2026

A range hood is typically made up of the hood body (canopy), a blower or fan system, filters, lighting, and controls. On Whirlpool model UXT4030ADS2, the most commonly referenced service parts include the fan motor, filters, and switches that run the fan and lights.

• Hood canopy (hood body): The visible shell that captures smoke, steam, and grease.
• Blower/fan assembly: Moves air through the hood; includes the motor and fan wheel.
• Grease filter: Traps grease before it reaches the blower and ducting.
• Charcoal filter (recirculating setups): Reduces odors when the hood does not vent outdoors.
• Damper/vent connector: Helps direct airflow and reduces backdraft.
• Controls (switches): Turn the fan speeds and lights on and off.
• Light lens/cover: Protects the bulb and spreads light.

Knowing the correct part names helps you match symptoms to the right repair. For example, weak airflow often points to a clogged filter or damper issue, while a dead fan commonly points to the motor or a switch.

• Fan runs but airflow is weak: clean/replace filters; check damper movement.
• Fan will not run: check the switch, then the motor.
• Lights do not work: check bulb and light cover fit; inspect wiring at the socket.

For step-by-step symptom help, use range hood fan doesn't work.

Last updated: February 2026

If your Whirlpool range hood model UXT4030ADS2 is not working, the most common causes are a power supply issue, a failed switch, or a failed internal component such as the fan motor. Start with the simplest checks (power and wiring), then test the switches and motor.

• Confirm the wall switch (if used) is ON and the hood is not on a switched-off circuit.
• Reset the tripped breaker or replace a blown fuse.
• If the hood is plug-in, reseat the plug; if hardwired, verify the junction box connections are tight.
• Check for a loose or damaged power cord if your setup uses one.
• Make sure the filter and cover are seated correctly and not interfering with the fan.

On the UXT4030ADS2, these parts are frequent culprits when the hood is dead or intermittent:

• Fan motor failure: humming, no airflow, or the fan will not start
• Fan or light switch failure: no response when toggled, works only in certain positions
• Wiring connection issue: heat discoloration, loose spade terminals, or broken wire

• Fan motor W10910693: replace if the motor will not run with correct power present.
• Rocker switch W10394557: replace if the fan or light function does not respond reliably.
• Power cord W10613691: replace if the cord is damaged, overheated, or has an intermittent connection.

A range hood that is not working can allow heat, smoke, and grease to build up quickly. Restoring proper ventilation helps protect cabinets, improves indoor air quality, and reduces grease accumulation on the blower and filters.

Use these step-by-step resources to narrow the failure before ordering parts:

• Range hood doesn't work at all
• Range hood lights and fan don't work
• Range hood fan doesn't work

Last updated: February 2026