KitchenAid KESA907PSS02 electric slide-in range Parts

On your KitchenAid KESA907PSS02 electric slide-in range, you clear most error codes by pressing OFF to stop the current function and clear the display. If the code returns after clearing, a failing component (often the oven sensor or wiring) is usually triggering it again; follow the checks below.

Quick steps to clear the code

• Press OFF once and wait a few seconds.
• If the display is unresponsive, press and hold START for 5 seconds to toggle Control Lock off (when locked, most pads will not work).
• If the oven is in Self-Clean, press OFF to stop; the door can stay locked until the oven cools.
• After a power outage, reset the clock if you see SET CLOCK.
• If a letter-number code reappears after clearing, stop using the oven and troubleshoot the likely cause.

Power reset (when OFF does not clear it)

A power reset clears many “stuck” control conditions.

1. Turn the range breaker OFF (or unplug if accessible).
2. Wait 1 to 5 minutes.
3. Restore power and try BAKE then START.

For control and display behavior, follow the steps in the KESA907PSS02 owner's manual.

What usually causes the code to come back

Many recurring codes are caused by temperature sensing or overheating protection issues.

Symptom after clearing	Most common area to check	Example part for KESA907PSS02
Code returns during preheat or baking	Oven temperature sensor circuit	Oven sensor WP8274149
Oven shuts down or overheats	High-limit protection, airflow	Range high-limit thermostat (model-specific)
Fan runs during bake/broil/clean	Cooling fan operation	Normal on some models

Why it matters

Clearing the code only removes the message; it does not fix the condition that triggered it. If the code returns, addressing the root cause (sensor, wiring connection, overheating, or control issue) prevents poor baking results and repeat shutdowns.

Last updated: February 2026

On your KitchenAid electric slide-in range model KESA907PSS02, the model number is printed on the model and serial number label on the appliance. We use that complete model number (and the serial number) to match the correct parts, features, and service information.

Where to look on the range

Check these common label locations first (the exact spot varies by design):

• Along the oven door frame when you open the oven door
• On the front frame behind the storage drawer or warming drawer (if equipped)
• On the side trim just inside the oven opening
• On the back panel of the range
• Under the cooktop edge (less common)

For diagrams and model-specific guidance, use the KESA907PSS02 owner's manual.

What to write down (and why)

When you find the label, record the full details so we can identify the right replacement parts and service information for your KitchenAid range.

Label item	Example	Why it matters
Model number	KESA907PSS02	Ensures exact fit for parts like elements and sensors
Serial number	(varies)	Helps match production changes and service info
Purchase/installation date	(your date)	Useful for service and maintenance records

Tips to avoid common mix-ups

• Copy the model number exactly as shown, including all letters and numbers
• Use the complete model number, not just “KESA907”
• If the label is hard to read, take a clear photo and zoom in
• If you are ordering parts for heating issues, confirm the model before selecting items like the oven sensor WP8274149 or bake element 4451175

Why it matters

KitchenAid ranges often have multiple versions that look similar. Using the correct model number helps us match the correct wiring, temperature control components, and cooking elements so the repair is safe and the part fits right.

Last updated: March 2026

A KitchenAid KESA907PSS02 electric slide-in range typically weighs about 180 to 230 lb. The exact shipping and installed weight varies by configuration and packaging; for the most accurate figure for your unit, check the specifications section in the KESA907PSS02 installation guide.

How to get the exact weight for KESA907PSS02

We recommend using the model-specific documentation because it is the only place you will see the official spec for your exact range.

• Look for a section labeled Specifications, Product dimensions, or Shipping information in the KESA907PSS02 installation guide
• If you are moving the range, use shipping weight (it is usually higher)
• If you are installing the range, use product weight (unboxed)
• Confirm whether any accessories are included (racks, half-rack, broiler pan)
• Measure your doorway and path; the guide lists key dimensions for slide-in installation

Typical weight ranges (what most homeowners should plan for)

These ranges are practical planning numbers for a 30-inch electric slide-in range like this KitchenAid.

Weight type	What it includes	Typical planning range
Product weight	Range only (unboxed)	180 to 230 lb
Shipping weight	Range plus packaging	200 to 260 lb

Why it matters

Weight affects safe handling, flooring protection, and installation. Planning for the higher end of the range helps prevent injuries and reduces the chance of damaging the power cord, terminal block area, or leveling legs during a move.

Last updated: February 2026