Samsung NX58K9850SG/AA-01 gas slide-in range Parts

The Samsung NX58K9850SG is a 30-inch class gas slide-in range; most models in this class are about 30 inches wide, roughly 36 inches tall to the cooktop, and about 26 to 29 inches deep (not including the handle). For the exact dimensions for your unit, use the NX58K9850SG owner's manual.

When customers ask about size, we typically look at these measurements:

• Overall width (cabinet opening fit)
• Overall height (leveling legs and countertop alignment)
• Overall depth (front-to-back clearance)
• Depth with door open (aisle clearance)
• Oven capacity (usable cooking space)

Use a tape measure and capture these common points:

• Measure width at the widest point of the cooktop
• Measure height from floor to cooktop surface (include leveling leg adjustment)
• Measure depth from the back of the range to the front edge (then separately include the handle)
• Confirm your cabinet cutout width and countertop height before moving the range

These are common planning numbers for a 30-inch class slide-in gas range like the Samsung NX58K9850SG.

Getting the exact dimensions prevents installation surprises like a range that sits proud of the cabinets, a door that hits an island, or a cooktop that does not line up with the countertop. The NX58K9850SG owner's manual is the best source for the precise spec sheet and clearances.

Last updated: February 2026

For the Samsung NX58K9850SG gas slide-in range, the exact shipped and installed weight varies by configuration, but most full-size Samsung slide-in gas ranges weigh about 180 to 230 lb. For the most accurate number for your unit, check the specifications section in the NX58K9850SG owner's manual.

Most 30-inch slide-in gas ranges fall into a fairly tight range depending on features like convection, a heavier cooktop, and door glass.

• Basic slide-in gas range: ~170 to 200 lb
• Convection slide-in gas range: ~180 to 220 lb
• Heavier trim and larger door glass: ~200 to 230 lb
• Crated or shipped weight: typically 10 to 30 lb more than the unit itself

Knowing the weight helps you plan safe delivery, floor protection, and leveling. It also matters when you pull the range out to service parts like the igniter, gas valve, or wiring.

• Use two to four adults; do not try to move a slide-in range alone.
• Protect flooring with a thin plywood sheet or an appliance mat.
• Shut off the gas supply and unplug the power cord before moving.
• Pull from the frame, not the oven door handle.
• After repositioning, confirm the range is level and the burners ignite normally.

Last updated: February 2026

For the Samsung Flex Duo gas slide-in range on this page, the model number is NX58K9850SG. If you are matching parts or looking up features for a Flex Duo range, using the exact model number ensures you get the correct Samsung documentation and compatible replacement parts.

You will typically find the model number on the appliance identification label. Common places to check include:

• Inside the oven door frame area (along the front edge)
• On the lower drawer frame (storage or warming drawer area)
• Behind the control panel area (less common)
• In your purchase paperwork or registration confirmation

For label-location details and model-specific info, use the NX58K9850SG owner's manual.

Samsung ranges often have similar-looking versions (for example, different finishes or revision codes). A close model number match can still use different components.

When you confirm NX58K9850SG, these are examples of parts you can match correctly for this range:

• Range oven temperature sensor DG32-00004C if baking temperatures seem off
• Samsung range bake igniter DG94-01012A if the oven will not ignite or heats slowly
• Range spark module DG96-00297A if multiple surface burners stop sparking

Using the exact NX58K9850SG model number reduces returns and downtime because it ties your range to the correct Samsung parts list, wiring, and operating instructions.

Last updated: February 2026