Kenmore 79072903010 gas range Parts

No. Stove igniters are not universal; the correct igniter for your Kenmore 79072903010 gas range must match the mounting style, electrical connector, and the way it draws current so the gas valve opens reliably.

Many “universal” igniters can be adapted, but they still have to fit and operate correctly.

• Brackets may not line up with your original mounting holes
• Wire connectors may differ (plug-in vs. splice)
• Igniter shape and length can affect burner lighting
• Current draw varies; low draw can prevent the oven gas valve from opening
• Heat-up time can change, causing delayed ignition

Your range uses electric igniters for both surface burners and the oven system. In normal operation, the oven igniter should glow and the burner should light after a short delay (typically 30 to 60 seconds) once Bake or Broil is selected; that timing is a practical check that the igniter system is working as designed. See the installation guide for the ignition checks and expected timing.

If you are replacing an igniter, we recommend choosing a model-matched part from the parts list for this range, such as the tappan range oven burner igniter 316489403 (commonly used for oven ignition on this platform).

An igniter that “fits” but does not perform correctly can cause delayed ignition, no-bake/no-broil symptoms, or repeated clicking and relighting attempts. Matching the correct igniter helps restore safe, consistent burner lighting.

Last updated: February 2026

A Kenmore gas range like model 79072903010 typically lasts 15 years with normal household use. Keeping burners clean, ensuring proper flame, and replacing wear items (like igniters and light bulbs) on time helps you get the full expected lifespan.

Most ranges reach their full service life when heat, gas flow, and ignition stay consistent.

• Daily high-heat cooking and frequent self-clean cycles can shorten life
• Poor airflow and grease buildup increase heat stress on components
• Weak ignition causes delayed lighting and extra wear on igniters
• Power surges can damage electronic controls and spark systems
• Skipping routine cleaning leads to burner clogging and uneven flames

Use the care and cleaning guidance in the owner's manual to keep the cooktop, burner heads, and oven cavity in good working order.

• Clean surface burner caps and heads regularly; keep ports clear
• Wipe spills promptly to prevent baked-on residue and corrosion
• Confirm flames are mostly blue; allow a few minutes after long inactivity
• Replace dim or failed oven lights with the correct bulb type
• If the oven takes too long to ignite, address it early (often an igniter issue)

A gas range can run for many years, but small issues like weak ignition or dirty burner ports can turn into bigger problems (delayed ignition, uneven cooking, or repeated part failures). Staying ahead of those basics is the simplest way to reach the 15-year mark.

Last updated: February 2026

Your Kenmore gas range model number is printed on the identification plate; on Kenmore model 79072903010, that plate is located on the right-hand surface of the oven front frame and is easiest to see after you open the storage, warmer, or broiler drawer. See the installation guide for the exact location diagram.

Check these spots in this order:

• Open the storage drawer (or warmer/broiler drawer, depending on your range)
• Look at the right-hand surface of the oven front frame (the front frame area behind the drawer opening)
• Find the identification plate with the model and serial number
• Write down the model number, serial number, and any lot number/letter shown
• Use that exact model number when selecting parts like an igniter or temperature sensor

The identification plate is more than a label; it helps us match the correct parts and settings for your exact range.

Once you have the model number, match parts by model first, then by symptom.

• Oven not heating or slow to ignite: check the tappan range oven burner igniter 316489403
• Oven temperature inaccurate: check the frigidaire range oven temperature sensor 316490000
• Surface burners not clicking/lighting correctly: ignition parts and the spark system are common suspects

If you smell gas: do not try to light the appliance or touch electrical switches; follow the gas safety steps in the installation guide.

Last updated: February 2026

On Kenmore gas range model 79072903010, the model and serial number identification plate is located on the right-hand surface of the oven front frame. You can access it by opening the storage drawer, warmer drawer, or broiler drawer (depending on your configuration); the label is on the lower right oven frame.

• Pull the bottom drawer straight out and look at the right side of the oven front frame.
• Use a flashlight and look for a silver or white rating label.
• Check for both model and serial numbers on the same plate.
• Write down any lot number or letter shown; it can help match parts.
• Take a clear photo before ordering parts or scheduling service.

The identification plate is more than a model tag; it also lists key gas-range details used for safe setup and correct parts matching.

When you have the model number, match parts by the exact model and the symptom.

• For an oven that will not heat, a common repair is replacing the igniter, such as the tappan range oven burner igniter 316489403.
• For temperature problems, the frigidaire range oven temperature sensor 316490000 is a common check.
• For surface burners that will not spark, the range spark module 5304508269 is often involved.

Kenmore ranges often share similar styling across model series, so the identification plate is the fastest way to avoid ordering the wrong igniter, sensor, burner parts, or gas valve. For the exact location diagram and product record section, use the owner's manual.

Last updated: February 2026