Owner’s manual
Error Codes
What year is my Kenmore dryer model?
Kenmore Elite dryer model 11076934690 does not have a single “model year” printed in the model number; the exact year is determined from the serial number on the model and serial number plate. We use that serial number to decode the manufacturing date for your specific dryer; see the 11076934690 owner's manual for where to find the plate.
Where to find the serial number on model 11076934690
The manual notes that the model and serial numbers are on the Model and Serial Number Plate.
Check these common locations on Kenmore Elite gas dryers:
- Door opening (on the cabinet frame)
- Inside the door (on the door itself)
- Rear panel (less common)
Write down both numbers exactly as shown:
- Model number: 11076934690
- Serial number: (letters and numbers)
How we determine the year from the serial number
Kenmore model numbers (like 110...) often indicate the manufacturing source, but the serial number is what identifies the build date.
Typical decode process:
- Identify the serial prefix (first letters or digits)
- Match the prefix to the manufacturer’s date code format
- Convert the coded week and year (or month and year) into a calendar date
Quick reference table
| What you have | What it tells you | What to do next |
|---|---|---|
| Model number only | Series and parts compatibility | Use it to find correct parts and diagrams |
| Serial number only | Build date code | Decode to get the manufacturing year |
| Model + serial | Exact unit identification | Best for date, parts, and service |
Why it matters
Knowing the manufacturing year helps us match the right version of parts (like a thermostat, belt, or fuse) and avoid ordering a look-alike part that does not fit your exact production run.
If you are troubleshooting while you have the dryer open, common wear items for this model include the dryer thermal fuse WP3390719 and dryer drum belt 661570V.
Last updated: February 2026
Where is the model number on a Kenmore Elite dryer?
On Kenmore Elite gas dryer model 11076934690, the model number is printed on the model and serial number plate. You will typically find that plate in the door opening area; open the dryer door and look around the cabinet frame and inner door area for the label (it lists both the model and serial numbers). For details and diagrams, use the 11076934690 owner's manual.
Where to look first
- Open the dryer door and inspect the cabinet frame around the opening
- Check the upper area of the door opening (common spot)
- Check the left and right sides of the door opening frame
- Look on the inner surface of the door itself
- Wipe dust off the label so the full number is readable
What you should write down
The plate usually includes both numbers; we recommend recording them exactly as shown.
| Item on the plate | What it’s used for |
|---|---|
| Model number (example: 11076934690) | Matching the correct Kenmore Elite dryer parts and diagrams |
| Serial number | Identifying the production run for service and support |
Why it matters
Using the exact model number prevents ordering the wrong dryer parts (like a belt, thermostat, or thermal fuse) and helps you pull the correct wiring diagram and troubleshooting steps for your specific Kenmore Elite gas dryer.
Last updated: February 2026
Will Kenmore dryer run if thermal fuse is blown?
On the Kenmore Elite gas dryer model 11076934690, a blown thermal fuse commonly prevents the dryer from running at all (no motor operation). If your drum still turns but you have no heat, the issue is more often in the heating circuit, not the run circuit; use the 11076934690 owner's manual troubleshooting steps to narrow it down.
What to check first (safe, quick checks)
- Make sure the door closes firmly; opening the door stops the dryer and it will not restart until the door is closed and you press PUSH TO START.
- Confirm the timer or cycle selector is set to an active drying cycle.
- Check the house fuse or breaker; a blown fuse or tripped breaker can stop the dryer from running.
- Clean the lint screen and confirm strong airflow at the exhaust; restricted venting can overheat the dryer and blow a thermal fuse.
- If you smell gas: shut off the gas supply, leave the area, and contact your gas supplier.
How the thermal fuse affects operation
A thermal fuse is a one-time safety device. When it opens, it interrupts power to protect the dryer from overheating. On many Kenmore and Whirlpool-built gas dryers, that interruption stops the motor circuit, so the dryer will not run.
Common symptom patterns
| What the dryer does | Most likely direction | What we recommend |
|---|---|---|
| Won’t start, no drum movement | Thermal fuse, door switch, power supply issue | Start with power, door, then test the fuse |
| Runs but no heat | Heating-side safety device or thermostat issue | Check operating and high-limit thermostats |
| Stops mid-cycle | Overheating from vent restriction | Clean venting, then test safety devices |
Parts that are often involved
If testing confirms a failed safety device, these are common matches for this model:
- Dryer thermal fuse WP3390719
- Dryer operating thermostat WP3387134
- Dryer high-limit thermostat W11050897
Why it matters
A blown thermal fuse is usually a symptom of overheating (often from lint buildup or a crushed or kinked vent). Replacing the fuse without fixing airflow can cause repeat failures and longer dry times.
Last updated: February 2026
